main
Ray Publish 0.1.0 c37c8ca
{
  "slug": "hip4086abz",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS Pre-ordered Chips, SOIC-24-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "hip4086abz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hip4086abz.kicad_sym",
    "hip4086abz.kicad_mod",
    "hip4086abz.glb",
    "hip4086abz.step",
    "hip4086abz.lbr",
    "docs/hero.png",
    "docs/hip4086abz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hip4086abz-hero.glb",
    "hip4086abz-hero.overlay.json"
  ],
  "component": {
    "mpn": "HIP4086ABZ",
    "manufacturer": "RENESAS",
    "package": "SOIC-24-300mil",
    "pin_count": 24,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3ddac1b600e7800dad3adfab75e69efb.pdf",
    "parts": {
      "symbol": "hip4086abz.kicad_sym",
      "footprint": "hip4086abz.kicad_mod",
      "model_3d": "hip4086abz-hero.glb",
      "model_3d_plain": "hip4086abz.glb",
      "model_3d_step": "hip4086abz-etched.step",
      "model_3d_step_plain": "hip4086abz.step",
      "lbr": "hip4086abz.lbr"
    },
    "distributor_links": {
      "lcsc": "C1549333",
      "digikey": "HIP4086ABZ-ND",
      "mouser": "968-HIP4086ABZ"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T06:45:56Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "HIP4086ABZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "968-HIP4086ABZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BHB",
        "type": "power_in",
        "description": "High-side bias connection for phase B; the bootstrap diode cathode and the positive side of the bootstrap capacitor connect here."
      },
      {
        "number": "2",
        "name": "BHI",
        "type": "input",
        "description": "High-side logic level input for phase B that controls BHO; it can be driven from 0V to 15V and must be no greater than VDD."
      },
      {
        "number": "3",
        "name": "BLI",
        "type": "input",
        "description": "Low-side logic level input for phase B that controls BLO; it can be driven from 0V to 15V and must be no greater than VDD."
      },
      {
        "number": "4",
        "name": "ALI",
        "type": "input",
        "description": "Low-side logic level input for phase A that controls ALO; it can be driven from 0V to 15V and must be no greater than VDD."
      },
      {
        "number": "5",
        "name": "AHI",
        "type": "input",
        "description": "High-side logic level input for phase A that controls AHO; it can be driven from 0V to 15V and must be no greater than VDD."
      },
      {
        "number": "6",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground; connect the sources of the low-side power MOSFETs to this pin and decouple VDD to it."
      },
      {
        "number": "7",
        "name": "RDEL",
        "type": "passive",
        "description": "Delay time set point; a resistor from this pin to VDD sets the dead time over a 10kΩ to 100kΩ range, and tying it to VSS disables the dead time."
      },
      {
        "number": "8",
        "name": "UVLO",
        "type": "input",
        "description": "Undervoltage set point; a resistor to VSS programs the threshold, with the pin open giving a typical 6.6V disable and the pin tied to VDD giving a typical 6.2V."
      },
      {
        "number": "9",
        "name": "RFSH",
        "type": "passive",
        "description": "Refresh pulse setting; an external capacitor to VSS lengthens the start-up refresh pulse, and with the pin open the pulse is typically 1.5µs."
      },
      {
        "number": "10",
        "name": "DIS",
        "type": "input",
        "description": "Disable input; a logic high sets all six outputs low and overrides all other inputs, and it can be driven from 0V to 15V and must be no greater than VDD."
      },
      {
        "number": "11",
        "name": "CLI",
        "type": "input",
        "description": "Low-side logic level input for phase C that controls CLO; it can be driven from 0V to 15V and must be no greater than VDD."
      },
      {
        "number": "12",
        "name": "CHI",
        "type": "input",
        "description": "High-side logic level input for phase C that controls CHO; it can be driven from 0V to 15V and must be no greater than VDD."
      },
      {
        "number": "13",
        "name": "CHB",
        "type": "power_in",
        "description": "High-side bias connection for phase C; the bootstrap diode cathode and the positive side of the bootstrap capacitor connect here."
      },
      {
        "number": "14",
        "name": "CHO",
        "type": "output",
        "description": "High-side gate driver output for phase C, connected to the gate of the high-side power MOSFET."
      },
      {
        "number": "15",
        "name": "CHS",
        "type": "power_in",
        "description": "High-side source connection for phase C; the source of the high-side power MOSFET and the negative side of the bootstrap capacitor connect here."
      },
      {
        "number": "16",
        "name": "AHB",
        "type": "power_in",
        "description": "High-side bias connection for phase A; the bootstrap diode cathode and the positive side of the bootstrap capacitor connect here."
      },
      {
        "number": "17",
        "name": "AHO",
        "type": "output",
        "description": "High-side gate driver output for phase A, connected to the gate of the high-side power MOSFET."
      },
      {
        "number": "18",
        "name": "AHS",
        "type": "power_in",
        "description": "High-side source connection for phase A; the source of the high-side power MOSFET and the negative side of the bootstrap capacitor connect here."
      },
      {
        "number": "19",
        "name": "CLO",
        "type": "output",
        "description": "Low-side gate driver output for phase C, connected to the gate of the low-side power MOSFET."
      },
      {
        "number": "20",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply, rated 7V to 15V in recommended operating conditions (absolute maximum 16V relative to GND); decouple to VSS (pin 6)."
      },
      {
        "number": "21",
        "name": "ALO",
        "type": "output",
        "description": "Low-side gate driver output for phase A, connected to the gate of the low-side power MOSFET."
      },
      {
        "number": "22",
        "name": "BLO",
        "type": "output",
        "description": "Low-side gate driver output for phase B, connected to the gate of the low-side power MOSFET."
      },
      {
        "number": "23",
        "name": "BHS",
        "type": "power_in",
        "description": "High-side source connection for phase B; the source of the high-side power MOSFET and the negative side of the bootstrap capacitor connect here."
      },
      {
        "number": "24",
        "name": "BHO",
        "type": "output",
        "description": "High-side gate driver output for phase B, connected to the gate of the high-side power MOSFET."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's Pin Configuration (24 LD PDIP, SOIC) is shared by the PDIP and SOIC packages; number; The datasheet does not state ERC pin electrical types. Types were assigned by function: bias and sou"
        ],
        "pages_sent": 17,
        "cost_usd": 0.1202,
        "at": "2026-11-13T06:45:49"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/3ddac1b600e7800dad3adfab75e69efb.pdf",
        "pages": 17,
        "sha256": "c6c3eb1baa555fbd",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hip4086abz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          15.4,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4b0d20f82f5b0124fecfe11c941274a3c865a30f7baee8b8fadd7df55972d4cd",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hip4086abz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          15.4,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a9a12ce1a40542c76c0dd0a397d86a93c43ff31b9a442f0fe9640a41c1d8d0ca",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "M24.3",
      "source_page": 16,
      "D": {
        "nom_mm": 15.4,
        "range_mm": [
          15.2,
          15.6
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.325,
        "range_mm": [
          10.0,
          10.65
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.5,
        "range_mm": [
          2.35,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "hip4086abz.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}