main
Ray
Publish 0.1.0
c37c8ca
HIP4086ABZ
RENESAS · Pre-ordered Chips · SOIC-24-300mil
HIP4086ABZ from RENESAS, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BHB | power_in | High-side bias connection for phase B; the bootstrap diode cathode and the positive side of the bootstrap capacitor connect here. |
| 2 | BHI | input | High-side logic level input for phase B that controls BHO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 3 | BLI | input | Low-side logic level input for phase B that controls BLO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 4 | ALI | input | Low-side logic level input for phase A that controls ALO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 5 | AHI | input | High-side logic level input for phase A that controls AHO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 6 | VSS | power_in | Ground; connect the sources of the low-side power MOSFETs to this pin and decouple VDD to it. |
| 7 | RDEL | passive | Delay time set point; a resistor from this pin to VDD sets the dead time over a 10kΩ to 100kΩ range, and tying it to VSS disables the dead time. |
| 8 | UVLO | input | Undervoltage set point; a resistor to VSS programs the threshold, with the pin open giving a typical 6.6V disable and the pin tied to VDD giving a typical 6.2V. |
| 9 | RFSH | passive | Refresh pulse setting; an external capacitor to VSS lengthens the start-up refresh pulse, and with the pin open the pulse is typically 1.5µs. |
| 10 | DIS | input | Disable input; a logic high sets all six outputs low and overrides all other inputs, and it can be driven from 0V to 15V and must be no greater than VDD. |
| 11 | CLI | input | Low-side logic level input for phase C that controls CLO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 12 | CHI | input | High-side logic level input for phase C that controls CHO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 13 | CHB | power_in | High-side bias connection for phase C; the bootstrap diode cathode and the positive side of the bootstrap capacitor connect here. |
| 14 | CHO | output | High-side gate driver output for phase C, connected to the gate of the high-side power MOSFET. |
| 15 | CHS | power_in | High-side source connection for phase C; the source of the high-side power MOSFET and the negative side of the bootstrap capacitor connect here. |
| 16 | AHB | power_in | High-side bias connection for phase A; the bootstrap diode cathode and the positive side of the bootstrap capacitor connect here. |
| 17 | AHO | output | High-side gate driver output for phase A, connected to the gate of the high-side power MOSFET. |
| 18 | AHS | power_in | High-side source connection for phase A; the source of the high-side power MOSFET and the negative side of the bootstrap capacitor connect here. |
| 19 | CLO | output | Low-side gate driver output for phase C, connected to the gate of the low-side power MOSFET. |
| 20 | VDD | power_in | Positive supply, rated 7V to 15V in recommended operating conditions (absolute maximum 16V relative to GND); decouple to VSS (pin 6). |
| 21 | ALO | output | Low-side gate driver output for phase A, connected to the gate of the low-side power MOSFET. |
| 22 | BLO | output | Low-side gate driver output for phase B, connected to the gate of the low-side power MOSFET. |
| 23 | BHS | power_in | High-side source connection for phase B; the source of the high-side power MOSFET and the negative side of the bootstrap capacitor connect here. |
| 24 | BHO | output | High-side gate driver output for phase B, connected to the gate of the high-side power MOSFET. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-24-300mil |
| Category | Interface ICs |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | -0.3 | 16 | V | Relative to GND | 5 | |
| Logic Inputs (xLI, xHI) | -0.3 | V | GND - 0.3V to VDD + 0.3V | 5 | |||
| Voltage on xHS | VxHS | -6 | 85 | V | -6V (Transient) to 85V (-40°C to +150°C) | 5 | |
| Phase Slew Rate (on xHS) | 20 | V/ns | 5 | ||||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Operating Junction Temp Range | TJ | -40 | 150 | °C | 5 | ||
| Supply Voltage | VDD | 7 | 15 | V | Relative to GND | 5 | |
| Logic Inputs (xLI, xHI) | 0 | V | 0V to VDD | 5 | |||
| Voltage on xHS | VxHS | 0 | 80 | V | 5 | ||
| Ambient Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Junction Temperature Range | TJ | -40 | 150 | °C | 5 | ||
| RDEL range | RDEL | 10 | 100 | kΩ | 5 | ||
| Thermal Resistance Junction-Ambient, SOIC | θJA | 75 | °C/W | SOIC Package (Notes 4, 6) | 5 | ||
| Thermal Resistance Junction-Case, SOIC | θJC | 22 | °C/W | SOIC Package (Notes 4, 6) | 5 | ||
| VDD Quiescent Current | 1.96 | 3.4 | 5.3 | mA | xHI = 5V, xLI = 5V (HIP4086) | 5 | |
| VDD Operating Current | 4 | 8.25 | 13.5 | mA | f = 20kHz, 50% Duty Cycle (HIP4086) | 5 | |
| xHB On Quiescent Current | 40 | 140 | µA | xHI = 0V (HIP4086) | 5 | ||
| xHB Off Quiescent Current | 0.5 | 0.8 | 1.4 | mA | xHI = VDD (HIP4086) | 5 | |
| xHB Operating Current | 0.9 | 2 | mA | f = 20kHz, 50% Duty Cycle (HIP4086) | 5 | ||
| xHB, xHS Leakage Current | 30 | 50 | µA | VxHS = 80V, VxHB = 93V | 5 | ||
| QPUMP Output Voltage | 10 | 12.5 | 14.75 | V | No Load | 5 | |
| QPUMP Output Current | 100 | 185 | µA | VxHS = 12V, VxHB = 22V | 5 | ||
| VDD Rising Undervoltage Threshold | 6.1 | 7.1 | 8.1 | V | RUV open | 5 | |
| VDD Falling Undervoltage Threshold | 5.6 | 6.6 | 7.6 | V | RUV open | 5 | |
| Minimum Undervoltage Threshold | 4.8 | 6.2 | 6.9 | V | RUV = VDD | 5 | |
| Low Level Input Voltage | 0.8 | V | 6 | ||||
| High Level Input Voltage | 2.7 | V | 6 | ||||
| Input Voltage Hysteresis | 35 | mV | 6 | ||||
| Low Level Input Current | -55 | -100 | -165 | µA | VIN = 0V | 6 | |
| High Level Input Current | -10 | 10 | µA | VIN = 5V | 6 | ||
| Low Level Output Voltage (VOUT - VSS) | 100 | 210 | mV | ISINKING = 30mA | 6 | ||
| Peak Turn-On Current | 0.5 | 1 | A | VOUT = 0V | 6 | ||
| Dead Time | 4.5 | µs | RDEL = 100kΩ | 6 | |||
| Dead Time | 0.3 | 0.5 | 0.8 | µs | RDEL = 10kΩ | 6 | |
| Dead Time Channel Matching | 7 | 20 | % | RDEL = 10kΩ | 6 | ||
| Lower Turn-Off Propagation Delay (xLI to xLO) | 30 | 75 | ns | No load | 6 | ||
| Upper Turn-Off Propagation Delay (xHI to xHO) | 75 | 135 | ns | No load | 6 | ||
| Lower Turn-On Propagation Delay (xLI to xLO) | 45 | 100 | ns | No load | 6 | ||
| Upper Turn-On Propagation Delay (xHI to xHO) | 65 | 158 | ns | No load | 6 | ||
| Rise Time | 20 | 60 | ns | CGATE = 1000pF | 6 | ||
| Fall Time | 10 | 40 | ns | CGATE = 1000pF | 6 | ||
| Disable Lower Turn-Off Propagation Delay (DIS to xLO) | 55 | 104 | ns | 6 | |||
| Disable Upper Turn-Off Propagation Delay (DIS to xHO) | 80 | 147 | ns | 6 | |||
| Disable to Lower Turn-On Propagation Delay (DIS to xLO) | 55 | 120 | ns | 6 |
CAD (KiCad official)
- Symbol:
HIP4086ABZ - Footprint:
Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm - 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
- 3D model files:
hip4086abz-etched.step/hip4086abz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hip4086abz.step/hip4086abz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (17 pp, sha256
c6c3eb1baa555fbd, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HIP4086ABZ
**RENESAS** · Pre-ordered Chips · SOIC-24-300mil
HIP4086ABZ from RENESAS, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BHB | power_in | High-side bias connection for phase B; the bootstrap diode cathode and the positive side of the bootstrap capacitor connect here. |
| 2 | BHI | input | High-side logic level input for phase B that controls BHO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 3 | BLI | input | Low-side logic level input for phase B that controls BLO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 4 | ALI | input | Low-side logic level input for phase A that controls ALO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 5 | AHI | input | High-side logic level input for phase A that controls AHO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 6 | VSS | power_in | Ground; connect the sources of the low-side power MOSFETs to this pin and decouple VDD to it. |
| 7 | RDEL | passive | Delay time set point; a resistor from this pin to VDD sets the dead time over a 10kΩ to 100kΩ range, and tying it to VSS disables the dead time. |
| 8 | UVLO | input | Undervoltage set point; a resistor to VSS programs the threshold, with the pin open giving a typical 6.6V disable and the pin tied to VDD giving a typical 6.2V. |
| 9 | RFSH | passive | Refresh pulse setting; an external capacitor to VSS lengthens the start-up refresh pulse, and with the pin open the pulse is typically 1.5µs. |
| 10 | DIS | input | Disable input; a logic high sets all six outputs low and overrides all other inputs, and it can be driven from 0V to 15V and must be no greater than VDD. |
| 11 | CLI | input | Low-side logic level input for phase C that controls CLO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 12 | CHI | input | High-side logic level input for phase C that controls CHO; it can be driven from 0V to 15V and must be no greater than VDD. |
| 13 | CHB | power_in | High-side bias connection for phase C; the bootstrap diode cathode and the positive side of the bootstrap capacitor connect here. |
| 14 | CHO | output | High-side gate driver output for phase C, connected to the gate of the high-side power MOSFET. |
| 15 | CHS | power_in | High-side source connection for phase C; the source of the high-side power MOSFET and the negative side of the bootstrap capacitor connect here. |
| 16 | AHB | power_in | High-side bias connection for phase A; the bootstrap diode cathode and the positive side of the bootstrap capacitor connect here. |
| 17 | AHO | output | High-side gate driver output for phase A, connected to the gate of the high-side power MOSFET. |
| 18 | AHS | power_in | High-side source connection for phase A; the source of the high-side power MOSFET and the negative side of the bootstrap capacitor connect here. |
| 19 | CLO | output | Low-side gate driver output for phase C, connected to the gate of the low-side power MOSFET. |
| 20 | VDD | power_in | Positive supply, rated 7V to 15V in recommended operating conditions (absolute maximum 16V relative to GND); decouple to VSS (pin 6). |
| 21 | ALO | output | Low-side gate driver output for phase A, connected to the gate of the low-side power MOSFET. |
| 22 | BLO | output | Low-side gate driver output for phase B, connected to the gate of the low-side power MOSFET. |
| 23 | BHS | power_in | High-side source connection for phase B; the source of the high-side power MOSFET and the negative side of the bootstrap capacitor connect here. |
| 24 | BHO | output | High-side gate driver output for phase B, connected to the gate of the high-side power MOSFET. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-24-300mil |
| Category | Interface ICs |
| Pins | 24 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | -0.3 | | 16 | V | Relative to GND | 5 |
| Logic Inputs (xLI, xHI) | | -0.3 | | | V | GND - 0.3V to VDD + 0.3V | 5 |
| Voltage on xHS | VxHS | -6 | | 85 | V | -6V (Transient) to 85V (-40°C to +150°C) | 5 |
| Phase Slew Rate (on xHS) | | | | 20 | V/ns | | 5 |
| Storage Temperature Range | | -65 | | 150 | °C | | 5 |
| Operating Junction Temp Range | TJ | -40 | | 150 | °C | | 5 |
| Supply Voltage | VDD | 7 | | 15 | V | Relative to GND | 5 |
| Logic Inputs (xLI, xHI) | | 0 | | | V | 0V to VDD | 5 |
| Voltage on xHS | VxHS | 0 | | 80 | V | | 5 |
| Ambient Temperature Range | TA | -40 | | 125 | °C | | 5 |
| Junction Temperature Range | TJ | -40 | | 150 | °C | | 5 |
| RDEL range | RDEL | 10 | | 100 | kΩ | | 5 |
| Thermal Resistance Junction-Ambient, SOIC | θJA | | 75 | | °C/W | SOIC Package (Notes 4, 6) | 5 |
| Thermal Resistance Junction-Case, SOIC | θJC | | 22 | | °C/W | SOIC Package (Notes 4, 6) | 5 |
| VDD Quiescent Current | | 1.96 | 3.4 | 5.3 | mA | xHI = 5V, xLI = 5V (HIP4086) | 5 |
| VDD Operating Current | | 4 | 8.25 | 13.5 | mA | f = 20kHz, 50% Duty Cycle (HIP4086) | 5 |
| xHB On Quiescent Current | | | 40 | 140 | µA | xHI = 0V (HIP4086) | 5 |
| xHB Off Quiescent Current | | 0.5 | 0.8 | 1.4 | mA | xHI = VDD (HIP4086) | 5 |
| xHB Operating Current | | | 0.9 | 2 | mA | f = 20kHz, 50% Duty Cycle (HIP4086) | 5 |
| xHB, xHS Leakage Current | | | 30 | 50 | µA | VxHS = 80V, VxHB = 93V | 5 |
| QPUMP Output Voltage | | 10 | 12.5 | 14.75 | V | No Load | 5 |
| QPUMP Output Current | | | 100 | 185 | µA | VxHS = 12V, VxHB = 22V | 5 |
| VDD Rising Undervoltage Threshold | | 6.1 | 7.1 | 8.1 | V | RUV open | 5 |
| VDD Falling Undervoltage Threshold | | 5.6 | 6.6 | 7.6 | V | RUV open | 5 |
| Minimum Undervoltage Threshold | | 4.8 | 6.2 | 6.9 | V | RUV = VDD | 5 |
| Low Level Input Voltage | | | | 0.8 | V | | 6 |
| High Level Input Voltage | | 2.7 | | | V | | 6 |
| Input Voltage Hysteresis | | | 35 | | mV | | 6 |
| Low Level Input Current | | -55 | -100 | -165 | µA | VIN = 0V | 6 |
| High Level Input Current | | -10 | | 10 | µA | VIN = 5V | 6 |
| Low Level Output Voltage (VOUT - VSS) | | | 100 | 210 | mV | ISINKING = 30mA | 6 |
| Peak Turn-On Current | | | 0.5 | 1 | A | VOUT = 0V | 6 |
| Dead Time | | | 4.5 | | µs | RDEL = 100kΩ | 6 |
| Dead Time | | 0.3 | 0.5 | 0.8 | µs | RDEL = 10kΩ | 6 |
| Dead Time Channel Matching | | | 7 | 20 | % | RDEL = 10kΩ | 6 |
| Lower Turn-Off Propagation Delay (xLI to xLO) | | | 30 | 75 | ns | No load | 6 |
| Upper Turn-Off Propagation Delay (xHI to xHO) | | | 75 | 135 | ns | No load | 6 |
| Lower Turn-On Propagation Delay (xLI to xLO) | | | 45 | 100 | ns | No load | 6 |
| Upper Turn-On Propagation Delay (xHI to xHO) | | | 65 | 158 | ns | No load | 6 |
| Rise Time | | | 20 | 60 | ns | CGATE = 1000pF | 6 |
| Fall Time | | | 10 | 40 | ns | CGATE = 1000pF | 6 |
| Disable Lower Turn-Off Propagation Delay (DIS to xLO) | | | 55 | 104 | ns | | 6 |
| Disable Upper Turn-Off Propagation Delay (DIS to xHO) | | | 80 | 147 | ns | | 6 |
| Disable to Lower Turn-On Propagation Delay (DIS to xLO) | | | 55 | 120 | ns | | 6 |
## CAD (KiCad official)
- Symbol: `HIP4086ABZ`
- Footprint: `Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm`
- 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
- 3D model files: `hip4086abz-etched.step` / `hip4086abz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hip4086abz.step` / `hip4086abz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/hip4086abz-datasheet.pdf) (17 pp, sha256 `c6c3eb1baa555fbd`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hip4086abz-datasheet.pdf)