3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHIP2211FR8Z
RENESAS · Gate Drivers · DFN-8(4x4)
HIP2211FR8Z from RENESAS, in a DFN-8(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Analog input supply voltage and positive supply for the lower gate driver; decouple to VSS with a 4.7µF or larger high-frequency ceramic capacitor, with an additional 0.1µF ceramic placed close to VDD and VSS recommended. |
| 2 | HB | power_in | High-side bootstrap supply voltage for the upper gate driver, referenced to HS; connect the bootstrap capacitor between this pin and HS. |
| 3 | HO | output | High-side output driver; connect to the gate of the high-side NMOS FET. |
| 4 | HS | power_in | High-side gate driver reference node; connect to the source of the high-side NMOS FET and to the bootstrap capacitor, and the datasheet limits continuous voltage on HS to the greater of [-10 or -(20 - VDD)] to +120 V (Rec. Op. Cond. +100 V). |
| 5 | HI | input | High-side driver logic input that is 3.3V logic compatible and VDD tolerant. |
| 6 | LI | input | Low-side driver logic input that is 3.3V logic compatible and VDD tolerant. |
| 7 | VSS | power_in | Ground reference for the VDD supply; when EPAD is available, connect VSS to EPAD. |
| 8 | LO | output | Low-side output driver; connect to the gate of the low-side NMOS FET. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | DFN-8(4x4) |
| Category | Motor Driver ICs |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, VDD | VDD | -0.3 | 20 | V | 6 | ||
| Boot Voltage, HB Referenced to HS | -0.3 | 20 | V | 6 | |||
| Bootstrap Voltage, HB Referenced to VSS | -0.3 | 120 | V | 6 | |||
| Bootstrap Voltage, HB Referenced to VDD | -0.3 | 110 | V | 6 | |||
| Continuous Voltage on HS | 120 | V | 6 | ||||
| EN, HI, and LI Voltage | -0.3 | V | 6 | ||||
| Voltage on LO | -0.3 | V | 6 | ||||
| Transient Voltage on LO (Repetitive Transient for 100ns) | -2 | V | Repetitive transient for 100ns | 6 | |||
| Maximum Junction Temperature | -65 | 150 | °C | 6 | |||
| Maximum Storage Temperature Range | -55 | 140 | °C | 6 | |||
| ESD Human Body Model | 2.5 | kV | Tested per JS-001-2017 | 6 | |||
| ESD Charged Device Model | 1 | kV | Tested per JS-002-2014 | 6 | |||
| Latch-Up | 100 | mA | Tested per JESD78E; Class 2, Level A | 6 | |||
| Supply Voltage, VDD | VDD | 6 | 18 | V | 7 | ||
| HI, LI, EN Inputs | 0 | V | 7 | ||||
| Boot Voltage, HB Referenced to HS | 18 | V | 7 | ||||
| Bootstrap Voltage, HB | 115 | V | 7 | ||||
| Continuous Voltage on HS | 100 | V | 7 | ||||
| HS Slew Rate | 50 | V/ns | 7 | ||||
| Temperature | -40 | 125 | °C | 7 | |||
| VDD Quiescent Current | IDDQ | 390 | 628 | µA | HI = LI = 0 | 7 | |
| VDD Operating Current | IDDO | 1.5 | 1.69 | mA | fSW = 500kHz; HI = LI = 50% square wave to VDD | 7 | |
| HB to HS Quiescent Current | IHBQ | 370 | 475 | µA | HI = 1; LI = 0 | 7 | |
| HB to HS Operating Current | IHBO | 1.4 | 1.6 | mA | fSW = 500kHz; HI = LI = 50% square wave to VDD | 7 | |
| HB to VSS Current, Operating | IHBSO | 88 | 110 | µA | fSW = 500kHz; HI = LI =50% square wave to VDD; VHB = 115V; VHS = 100V | 7 | |
| HB to VSS Leakage Current | IHBS | 29 | 47 | µA | HI = LI = 0; VHB = VHS = 100V | 7 | |
| Low Level Threshold | VIL | 1.29 | 1.4 | 1.47 | V | 8 | |
| High Level Threshold | VIH | 1.84 | 2.1 | 2.35 | V | 8 | |
| VDD Rising UVLO Threshold | VDDR | 5.3 | 5.6 | 5.9 | V | 8 | |
| VDD Falling UVLO Threshold | VDDF | 4.75 | 5.1 | 5.35 | V | 8 | |
| Input Threshold Hysteresis | VHYS | 0.7 | V | 8 | |||
| Input Pull-Down Resistance | RIN | 95 | kΩ | HI = LI = VDD; Resistance to VSS | 8 | ||
| Minimum Input Pulse Width for Response at Output | TMIN | 10 | ns | No load on HO and LO; Output drives to rail | 8 | ||
| VDD Threshold Hysteresis | VDDH | 0.5 | V | 8 | |||
| Thermal Resistance, Junction to Ambient | θJA | 40 | °C/W | Free air; 8 Ld DFN; Notes 6, 7 | 6 | ||
| Thermal Resistance, Junction to Case | θJC | 2.5 | °C/W | Case at center of exposed metal pad (Note 7) | 6 | ||
| Max Power Dissipation at +25°C in Free Air | 3.12 | W | At +25°C free air (Note 10) | 6 |
CAD (KiCad official)
- Symbol:
HIP2211FR8Z - Footprint:
Package_DFN_QFN:DFN-8-1EP_4x4mm_P0.8mm_EP2.5x3.6mm - 3D model: DFN-8(4x4) (KiCad packages3D, STEP)
- 3D model files:
hip2211fr8z-etched.step/hip2211fr8z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hip2211fr8z.step/hip2211fr8z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (28 pp, sha256
b7ae7d1e3bb52343, retrieved 2026-11-04, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).