main
Ray Publish 0.1.0 c406c21
{
  "slug": "hin232cbz",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS Pre-ordered Chips, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "hin232cbz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hin232cbz.kicad_sym",
    "hin232cbz.kicad_mod",
    "hin232cbz.glb",
    "hin232cbz.step",
    "hin232cbz.lbr",
    "docs/hero.png",
    "docs/hin232cbz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hin232cbz-hero.glb",
    "hin232cbz-hero.overlay.json",
    "hin232cbz-etched.glb"
  ],
  "component": {
    "mpn": "HIN232CBZ",
    "manufacturer": "RENESAS",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0ba58a08f317b5b69daa7da2767a833c.pdf",
    "parts": {
      "symbol": "hin232cbz.kicad_sym",
      "footprint": "hin232cbz.kicad_mod",
      "model_3d": "hin232cbz-hero.glb",
      "model_3d_plain": "hin232cbz-etched.glb",
      "model_3d_step": "hin232cbz-etched.step",
      "model_3d_step_plain": "hin232cbz.step",
      "lbr": "hin232cbz.lbr"
    },
    "distributor_links": {
      "lcsc": "C1544396",
      "digikey": "20-HIN232CBZ-ND",
      "mouser": "968-HIN232CBZ"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T02:01:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "20-HIN232CBZ-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "968-HIN232CBZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "External charge-pump capacitor C1 (+ terminal) connects to this lead (0.1µF or 1µF)."
      },
      {
        "number": "2",
        "name": "V+",
        "type": "power_out",
        "description": "Internally generated positive supply (+10V nominal) from the voltage doubler, with reservoir capacitor to ground."
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "External charge-pump capacitor C1 (- terminal) connects to this lead."
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "External charge-pump capacitor C2 (+ terminal) connects to this lead (0.1µF or 1µF)."
      },
      {
        "number": "5",
        "name": "C2-",
        "type": "passive",
        "description": "External charge-pump capacitor C2 (- terminal) connects to this lead."
      },
      {
        "number": "6",
        "name": "V-",
        "type": "power_out",
        "description": "Internally generated negative supply (-10V nominal) from the voltage inverter, with reservoir capacitor to ground."
      },
      {
        "number": "7",
        "name": "T2OUT",
        "type": "output",
        "description": "Transmitter 2 output at RS-232 levels (nominally ±10V), short-circuit protected with 300Ω minimum power-off impedance."
      },
      {
        "number": "8",
        "name": "R2IN",
        "type": "input",
        "description": "Receiver 2 input accepting RS-232 levels up to ±30V, with internal 5kΩ pull-down to GND."
      },
      {
        "number": "9",
        "name": "R2OUT",
        "type": "output",
        "description": "Receiver 2 output at TTL/CMOS levels (0V to VCC)."
      },
      {
        "number": "10",
        "name": "T2IN",
        "type": "input",
        "description": "Transmitter 2 input accepting TTL/CMOS levels, with internal 400kΩ pull-up resistor to VCC."
      },
      {
        "number": "11",
        "name": "T1IN",
        "type": "input",
        "description": "Transmitter 1 input accepting TTL/CMOS levels, with internal 400kΩ pull-up resistor to VCC."
      },
      {
        "number": "12",
        "name": "R1OUT",
        "type": "output",
        "description": "Receiver 1 output at TTL/CMOS levels (0V to VCC)."
      },
      {
        "number": "13",
        "name": "R1IN",
        "type": "input",
        "description": "Receiver 1 input accepting RS-232 levels up to ±30V, with internal 5kΩ pull-down to GND."
      },
      {
        "number": "14",
        "name": "T1OUT",
        "type": "output",
        "description": "Transmitter 1 output at RS-232 levels (nominally ±10V), short-circuit protected with 300Ω minimum power-off impedance."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground lead, connect to 0V."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input, 5V ±10%."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The page 4 pinout drawing text is scrambled in extraction, so the pin-to-name mapping for the 16-pin; The datasheet covers the HIN232 in both 16 Ld PDIP and 16 Ld SOIC; the SOIC variant (HIN232CBZ, M16.; The C1+/C1-/C2+/C2- pins are charge-pump capacitor terminals with no ERC class stated in the datashe"
        ],
        "pages_sent": 22,
        "cost_usd": 0.1161,
        "at": "2026-11-11T02:01:00"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/0ba58a08f317b5b69daa7da2767a833c.pdf",
        "pages": 22,
        "sha256": "d4773763df765fad",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hin232cbz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hin232cbz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "14df21679ed81eead38607701dc82091fba7f34d42973699c92d3523e37db1b8",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "M16.3",
      "source_page": 18,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.325,
        "range_mm": [
          10.0,
          10.65
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.5,
        "range_mm": [
          2.35,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "hin232cbz.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}