main
History Download
Ray Publish 0.1.0 c406c21

HIN232CBZ

RENESAS · Pre-ordered Chips · SOIC-16-300mil

HIN232CBZ from RENESAS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive External charge-pump capacitor C1 (+ terminal) connects to this lead (0.1µF or 1µF).
2 V+ power_out Internally generated positive supply (+10V nominal) from the voltage doubler, with reservoir capacitor to ground.
3 C1- passive External charge-pump capacitor C1 (- terminal) connects to this lead.
4 C2+ passive External charge-pump capacitor C2 (+ terminal) connects to this lead (0.1µF or 1µF).
5 C2- passive External charge-pump capacitor C2 (- terminal) connects to this lead.
6 V- power_out Internally generated negative supply (-10V nominal) from the voltage inverter, with reservoir capacitor to ground.
7 T2OUT output Transmitter 2 output at RS-232 levels (nominally ±10V), short-circuit protected with 300Ω minimum power-off impedance.
8 R2IN input Receiver 2 input accepting RS-232 levels up to ±30V, with internal 5kΩ pull-down to GND.
9 R2OUT output Receiver 2 output at TTL/CMOS levels (0V to VCC).
10 T2IN input Transmitter 2 input accepting TTL/CMOS levels, with internal 400kΩ pull-up resistor to VCC.
11 T1IN input Transmitter 1 input accepting TTL/CMOS levels, with internal 400kΩ pull-up resistor to VCC.
12 R1OUT output Receiver 1 output at TTL/CMOS levels (0V to VCC).
13 R1IN input Receiver 1 input accepting RS-232 levels up to ±30V, with internal 5kΩ pull-down to GND.
14 T1OUT output Transmitter 1 output at RS-232 levels (nominally ±10V), short-circuit protected with 300Ω minimum power-off impedance.
15 GND power_in Ground lead, connect to 0V.
16 VCC power_in Power supply input, 5V ±10%.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC to Ground VCC -0.3 6 V Relative to GND; printed (GND -0.3V) < VCC < 6V 9
V+ to Ground V+ 13.2 V Printed (VCC -0.3V) < V+ < 13.2V; carries Note 2 (Only HIN239) 9
V- to Ground V- -12 0.3 V Relative to GND; printed -12V < V- < (GND +0.3V) 9
V+ to V- V+ - V- 24 V 9
RIN input voltage RIN 30 V 9
ROUT output voltage VRXOUT -0.3 V Relative to GND; printed (GND -0.3V) < VRXOUT < (V+ +0.3V) 9
Maximum junction temperature (plastic package) 150 °C 9
Maximum storage temperature range -65 150 °C 9
VCC supply tolerance VCC -10 10 % VCC = +5V ±10% 9
Operating temperature range (HIN2xxCx, commercial) 0 70 °C Applies to HIN232CBZ (commercial, 0 to +70°C) 9
Charge pump input voltage 5.5 V Stated in text: charge pump accepts input voltages up to 10
Thermal resistance, 16 Ld SOIC package 100 °C/W Typical; measured in free air on low effective thermal conductivity test board (Note 3) 9
Supply current ICC ICC 5 10 mA No Load, TA = +25°C 9
Input logic low VIL (TIN) VIL 0.8 V 9
Input logic high VIH (TIN) VIH 2 V 9
Transmitter input pull-up current IP 15 200 µA TIN = 0V 9
TTL/CMOS receiver output voltage low VOL 0.1 0.4 V IOUT = 1.6mA 9
TTL/CMOS receiver output voltage high VOH 3.5 4.6 V IOUT = -1.0mA 9
RS-232 input voltage range VIN -30 30 V 9
Receiver input impedance RIN 3 5 7 k VIN = ±3V 9
Receiver input low threshold VIN(H-L) 0.8 1.2 V VCC = 5V, TA = +25°C 9
Receiver input high threshold VIN(L-H) 1.7 2.4 V VCC = 5V, TA = +25°C 9
Receiver input hysteresis VHYST 0.2 0.5 1 V 9
Baud rate (1 transmitter switching) 120 kbps RL = 3k 10
Instantaneous slew rate SR 30 V/µs CL = 10pF, RL = 3k, TA = +25°C (Note 4) 10
Transmitter output voltage swing TOUT 5 9 10 V Transmitter outputs, 3k to Ground 10
Output resistance (TOUT, powered down) 300 VCC = V+ = V- = 0V, VOUT = 2V 10

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin C2- External capacitor (- terminal) is connected to this lead. TIN Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kpull-up resistor to VCC is connected to each lead. 2

CAD (KiCad official)

  • Symbol: HIN232CBZ
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: hin232cbz-etched.step / hin232cbz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hin232cbz.step / hin232cbz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (22 pp, sha256 d4773763df765fad, retrieved 2026-11-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF