HIN232ACPZ

{
  "slug": "hin232acpz",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS Pre-ordered Chips, PDIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "hin232acpz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hin232acpz.kicad_sym",
    "hin232acpz.kicad_mod",
    "hin232acpz.glb",
    "hin232acpz.step",
    "hin232acpz.lbr",
    "docs/hero.png",
    "docs/hin232acpz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hin232acpz-hero.glb",
    "hin232acpz-hero.overlay.json",
    "hin232acpz-etched.glb"
  ],
  "component": {
    "mpn": "HIN232ACPZ",
    "manufacturer": "RENESAS",
    "package": "PDIP-16",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d06e6295b211abb0a0292a0d2ad6b6cb.pdf",
    "parts": {
      "symbol": "hin232acpz.kicad_sym",
      "footprint": "hin232acpz.kicad_mod",
      "model_3d": "hin232acpz-hero.glb",
      "model_3d_plain": "hin232acpz-etched.glb",
      "model_3d_step": "hin232acpz-etched.step",
      "model_3d_step_plain": "hin232acpz.step",
      "lbr": "hin232acpz.lbr"
    },
    "distributor_links": {
      "lcsc": "C1543934",
      "digikey": "HIN232ACPZ-ND",
      "mouser": "968-HIN232ACPZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T22:44:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "HIN232ACPZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "968-HIN232ACPZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "External charge-pump capacitor (+ terminal) connects to this lead; the datasheet's typical application uses 0.1F capacitors for C1-C4."
      },
      {
        "number": "2",
        "name": "V+",
        "type": "power_out",
        "description": "Internally generated positive supply, nominally +10V, that requires a reservoir capacitor (C3) to reduce ripple."
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "External charge-pump capacitor (- terminal) connects to this lead."
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "External charge-pump capacitor (+ terminal) connects to this lead for the voltage inverter."
      },
      {
        "number": "5",
        "name": "C2-",
        "type": "passive",
        "description": "External charge-pump capacitor (- terminal) connects to this lead for the voltage inverter."
      },
      {
        "number": "6",
        "name": "V-",
        "type": "power_out",
        "description": "Internally generated negative supply, nominally -10V, that requires a reservoir capacitor (C4) to reduce ripple."
      },
      {
        "number": "7",
        "name": "T2OUT",
        "type": "output",
        "description": "Transmitter 2 output at RS-232 levels, nominally 10V, limited to 10mA short-circuit current and safe when shorted to ground indefinitely."
      },
      {
        "number": "8",
        "name": "R2IN",
        "type": "input",
        "description": "Receiver 2 input accepting RS-232 levels up to 30V, with an internal 5k pull-down to GND and 3k to 7k input impedance."
      },
      {
        "number": "9",
        "name": "R2OUT",
        "type": "output",
        "description": "Receiver 2 output at TTL/CMOS levels, swinging from 0V to VCC."
      },
      {
        "number": "10",
        "name": "T2IN",
        "type": "input",
        "description": "Transmitter 2 TTL/CMOS input with an internal 400k pull-up to VCC, so an unused input may be left unconnected."
      },
      {
        "number": "11",
        "name": "T1IN",
        "type": "input",
        "description": "Transmitter 1 TTL/CMOS input with an internal 400k pull-up to VCC, with a logic threshold of about 1.3V at VCC = 5V."
      },
      {
        "number": "12",
        "name": "R1OUT",
        "type": "output",
        "description": "Receiver 1 output at TTL/CMOS levels, swinging from 0V to VCC."
      },
      {
        "number": "13",
        "name": "R1IN",
        "type": "input",
        "description": "Receiver 1 input accepting RS-232 levels up to 30V, with an internal 5k pull-down to GND and 3k to 7k input impedance."
      },
      {
        "number": "14",
        "name": "T1OUT",
        "type": "output",
        "description": "Transmitter 1 output at RS-232 levels, nominally 10V, limited to 10mA short-circuit current and safe when shorted to ground indefinitely."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground lead, to be connected to 0V."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Single +5V power supply input, specified as 5V 10%."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 10,
        "cost_usd": 0.0212,
        "at": "2026-10-30T22:44:46"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/d06e6295b211abb0a0292a0d2ad6b6cb.pdf",
        "pages": 10,
        "sha256": "bcd020e86406c3a9",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hin232acpz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "17a30b1f0ab3fd5384a1231e3c63c394888d5b952c542a8c189e023ed3467464",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hin232acpz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "32c7a8971557b8abc6dfd0a67ec118c0c8e7a86618373780d73b0b9c62fa35a5",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}