# HIN202ECPZ

**RENESAS** · RS232 ICs · PDIP-16

HIN202ECPZ from RENESAS, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | External charge-pump capacitor (+ terminal) connects to this lead (0.1µF). |
| 2 | V+ | power_out | Internally generated positive supply (+10V nominal) from the voltage doubler, with 0.1µF capacitor. |
| 3 | C1- | passive | External charge-pump capacitor (- terminal) connects to this lead (0.1µF). |
| 4 | C2+ | passive | External charge-pump capacitor (+ terminal) connects to this lead (0.1µF). |
| 5 | C2- | passive | External charge-pump capacitor (- terminal) connects to this lead (0.1µF). |
| 6 | V- | power_out | Internally generated negative supply (-10V nominal) from the voltage inverter, with 0.1µF capacitor. |
| 7 | T2OUT | output | Transmitter 2 output at RS-232 levels (nominally ±10V). |
| 8 | R2IN | input | Receiver 2 input accepting RS-232 levels (±30V range) with internal 5kΩ pull-down resistor to GND. |
| 9 | R2OUT | output | Receiver 2 output at TTL/CMOS levels. |
| 10 | T2IN | input | Transmitter 2 input accepting TTL/CMOS levels with internal 400kΩ pull-up resistor to VCC. |
| 11 | T1IN | input | Transmitter 1 input accepting TTL/CMOS levels with internal 400kΩ pull-up resistor to VCC. |
| 12 | R1OUT | output | Receiver 1 output at TTL/CMOS levels. |
| 13 | R1IN | input | Receiver 1 input accepting RS-232 levels (±30V range) with internal 5kΩ pull-down resistor to GND. |
| 14 | T1OUT | output | Transmitter 1 output at RS-232 levels (nominally ±10V). |
| 15 | GND | power_in | Ground lead, connect to 0V. |
| 16 | VCC | power_in | Power supply input, 5V ±10%. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | PDIP-16 |
| Category | Communication Interface Chip |
| Pins | 16 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Current | ICC |  | 8 | 15 | mA | HIN202E, No Load, TA = 25°C | 8 |
| Input Logic Low | VIL |  |  | 0.8 | V | TIN | 8 |
| Input Logic High | VIH | 2 |  |  | V | TIN | 8 |
| Transmitter Input Pullup Current | IP |  | 15 | 200 | µA | TIN = 0V | 8 |
| TTL/CMOS Receiver Output Voltage Low | VOL |  | 0.1 | 0.4 | V | IOUT = 1.6mA (HIN202E, HIN232E, IOUT = 3.2mA) | 8 |
| TTL/CMOS Receiver Output Voltage High | VOH | 3.5 | 4.6 |  | V | IOUT = -1mA | 8 |
| RS-232 Input Voltage Range | VIN | -30 |  | 30 | V |  | 8 |
| Receiver Input Impedance | RIN | 3 | 5 | 7 | kΩ | TA = 25°C, VIN = 3V | 8 |
| Receiver Input High Threshold | VIN (L-H) |  | 1.7 | 2.4 | V | VCC = 5V, TA = 25°C, Active Mode | 8 |
| Receiver Input Hysteresis | VHYST | 0.2 | 0.5 | 1 | V | VCC = 5V, No Hysteresis in Shutdown Mode | 8 |
| Transmitter, Receiver Propagation Delay | tPD |  | 0.5 | 10 | µs | All except HIN213E | 9 |
| Transition Region Slew Rate | SRT | 3 | 20 | 45 | V/µs | RL = 3kΩ, CL = 1000pF, measured from +3V to -3V or -3V to +3V, 1 Transmitter Switching | 9 |
| Output Voltage Swing | TOUT | 5 | 9 | 10 | V | Transmitter Outputs, 3kΩ to Ground | 9 |
| Output Resistance | TOUT | 300 |  |  | Ω | VCC = V+ = V- = 0V, VOUT = 2V | 9 |
| VCC to Ground | VCC | -0.3 |  | 6 | V | (GND -0.3V) < VCC < 6V | 8 |
| V+ to Ground | V+ | -0.3 |  | 12 | V | (VCC -0.3V) < V+ < 12V | 8 |
| V- to Ground | V- | -12 |  | 0.3 | V | -12V < V- < (GND +0.3V) | 8 |
| Input Voltage TIN | VIN | -0.3 |  |  | V | -0.3V < VIN < (V+ +0.3V) | 8 |
| Input Voltage RIN | RIN |  |  | 30 | V |  | 8 |
| Operating Temperature Range | TA | 0 |  | 70 | °C | HIN2XXECX | 8 |
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | VCC = +5V ±10% | 8 |
| Maximum Junction Temperature | TJ |  |  | 150 | °C | Plastic Package | 8 |
| Storage Temperature Range | Tstg | -65 |  | 150 | °C |  | 8 |
| Maximum Lead Temperature |  |  |  | 300 | °C | Soldering 10s | 8 |
| Thermal Resistance | θJA |  | 90 |  | °C/W | 16 Ld PDIP Package, typical | 8 |
| Receiver Input Low Threshold | VIN (H-L) |  | 1.2 |  | V | VCC = 5V, TA = 25°C, Active Mode | 8 |
| RS-232 Output Short Circuit Current | ISC |  | 10 |  | mA | TOUT Shorted to GND | 9 |
| ESD HBM RS-232 Pins (TOUT, RIN) |  |  | 15 |  | kV | Human Body Model | 9 |
| ESD IEC61000-4-2 Contact Discharge |  |  | 8 |  | kV | RS-232 Pins (TOUT, RIN) | 9 |
| ESD IEC61000-4-2 Air Gap |  |  | 15 |  | kV | RS-232 Pins (TOUT, RIN), Note 3 | 9 |
| ESD HBM All Other Pins |  |  | 2 |  | kV | Human Body Model | 9 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts |  | tin | C2- External capacitor (- terminal) is connected to this lead. TIN Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kpull-up resistor to VCC is connected to each lead. | 7 |

## CAD (KiCad official)

- Symbol: `HIN202ECPZ`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files: `hin202ecpz-etched.step` / `hin202ecpz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hin202ecpz.step` / `hin202ecpz.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [RENESAS datasheet](docs/hin202ecpz-datasheet.pdf) (23 pp, sha256 `2f911a7efceea1aa`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/hin202ecpz-datasheet.pdf)