main
Ray
Publish 0.1.0
b09daf7
HIN202CBZ
RENESAS · RS232 ICs · SOIC-16-300mil
HIN202CBZ from RENESAS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the external charge-pump capacitor C1, typically 0.1 µF. |
| 2 | V+ | power_out | Internally generated positive supply, nominally +10 V, produced from VCC by the charge pump. |
| 3 | C1- | passive | Negative terminal of the external charge-pump capacitor C1. |
| 4 | C2+ | passive | Positive terminal of the external charge-pump capacitor C2. |
| 5 | C2- | passive | Negative terminal of the external charge-pump capacitor C2. |
| 6 | V- | power_out | Internally generated negative supply, nominally -10 V, produced by the charge-pump voltage inverter. |
| 7 | T2OUT | output | RS-232 transmitter 2 output at nominally ±10 V swing; short-circuit protected and can be shorted to ground indefinitely. |
| 8 | R2IN | input | RS-232 receiver 2 input accepting up to ±30 V, with 3 kΩ to 7 kΩ input impedance and an internal 5 kΩ pull-down to GND. |
| 9 | R2OUT | output | TTL/CMOS receiver 2 output, swinging between GND and VCC. |
| 10 | T2IN | input | TTL/CMOS-compatible transmitter 2 input with an internal 400 kΩ pull-up to VCC; an unused input may be left unconnected. |
| 11 | T1IN | input | TTL/CMOS-compatible transmitter 1 input with an internal 400 kΩ pull-up to VCC; an unused input may be left unconnected. |
| 12 | R1OUT | output | TTL/CMOS receiver 1 output, swinging between GND and VCC. |
| 13 | R1IN | input | RS-232 receiver 1 input accepting up to ±30 V, with 3 kΩ to 7 kΩ input impedance and an internal 5 kΩ pull-down to GND. |
| 14 | T1OUT | output | RS-232 transmitter 1 output at nominally ±10 V swing; short-circuit protected and can be shorted to ground indefinitely. |
| 15 | GND | power_in | Ground lead, connect to 0 V. |
| 16 | VCC | power_in | Power supply input, 5 V ±10% (HIN202). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Current | ICC | 8 | 15 | mA | No Load, TA = 25°C (HIN202) | 7 | |
| Supply voltage tolerance (VCC = 5V) | VCC | -10 | 10 | % | VCC = +5V 10% (HIN207 is 5%) | 7 | |
| Input Logic Low | VIL | 0.8 | V | TIN, EN, SD, EN, SD | 7 | ||
| Input Logic High (TIN) | VIH | 2 | V | TIN | 7 | ||
| Input Logic High (EN, SD) | VIH | 2.4 | V | EN, SD, EN, SD | 7 | ||
| Transmitter Input Pullup Current | IP | 15 | 200 | µA | TIN = 0V | 7 | |
| TTL/CMOS Receiver Output Voltage Low | VOL | 0.1 | 0.4 | V | IOUT = 3.2mA (HIN202) | 7 | |
| TTL/CMOS Receiver Output Voltage High | VOH | 3.5 | 4.6 | V | IOUT = -1mA | 7 | |
| TTL/CMOS Receiver Output Leakage | 0.05 | 10 | µA | EN = VCC, EN = 0, 0V < ROUT < VCC | 7 | ||
| RS-232 Input Voltage Range | VIN | -30 | 30 | V | 7 | ||
| Receiver Input Impedance | RIN | 3 | 5 | 7 | kΩ | TA = 25°C, VIN = 3V | 7 |
| Receiver Input Low Threshold (Active Mode) | VIN (H-L) | 0.8 | 1.2 | V | VCC = 5V, TA = 25°C, Active Mode | 7 | |
| Receiver Input High Threshold (Active Mode) | VIN (L-H) | 1.7 | 2.4 | V | VCC = 5V, TA = 25°C, Active Mode | 7 | |
| Receiver Input Hysteresis | VHYST | 0.2 | 0.5 | 1 | V | VCC = 5V, no hysteresis in shutdown mode | 7 |
| Baud Rate, 1 Transmitter Switching | 120 | kbps | RL = 3k | 8 | |||
| Transmitter, Receiver Propagation Delay | tPD | 0.5 | 10 | µs | HIN202, HIN206, HIN207, HIN208, HIN211 | 8 | |
| Transition Region Slew Rate | SRT | 3 | 30 | V/µs | RL = 3k, CL = 2500pF, measured from +3V to -3V or -3V to +3V, 1 Transmitter Switching (Note 2) | 8 | |
| Output Voltage Swing, TOUT | TOUT | 5 | 9 | 10 | V | Transmitter Outputs, 3k to Ground | 8 |
| Output Resistance, TOUT | TOUT | 300 | Ω | VCC = V+ = V- = 0V, VOUT = 2V | 8 | ||
| RS-232 Output Short Circuit Current | ISC | 10 | mA | TOUT shorted to GND | 8 | ||
| VCC to Ground | VCC | -0.3 | 6 | V | Referenced to GND: (GND -0.3V) < VCC < 6V | 7 | |
| V+ to Ground | V+ | 12 | V | (VCC -0.3V) < V+ < 12V | 7 | ||
| V- to Ground | V- | -12 | V | -12V < V- < (GND +0.3V) | 7 | ||
| RIN input voltage | RIN | 30 | V | Printed as 30V | 7 | ||
| TIN input voltage | TIN | -0.3 | V | -0.3V < VIN < (V+ +0.3V) | 7 | ||
| ROUT output voltage | ROUT | -0.3 | V | (GND -0.3V) < VRXOUT < (V+ +0.3V) | 7 | ||
| Operating temperature range | 0 | 70 | °C | HIN2XXCX (HIN202CBZ commercial grade) | 7 | ||
| Thermal resistance, junction to ambient, 16 Ld SOIC (W) | θJA | 100 | °C/W | Typical, Note 1: component mounted on low effective thermal conductivity test board in free air | 7 | ||
| Maximum Junction Temperature (Plastic Package) | 150 | °C | 7 | ||||
| Maximum Storage Temperature Range | -65 | 150 | °C | 7 | |||
| Maximum Lead Temperature (Soldering) | 300 | °C | Soldering 10s (SOIC and SSOP, lead tips only) | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | C2- External capacitor (- terminal) is connected to this lead. TIN Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kpull-up resistor to VCC is connected to each lead. | 3 |
CAD (KiCad official)
- Symbol:
HIN202CBZ - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
hin202cbz-etched.step/hin202cbz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hin202cbz.step/hin202cbz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (20 pp, sha256
2589abb4fe7ec19d, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HIN202CBZ
**RENESAS** · RS232 ICs · SOIC-16-300mil
HIN202CBZ from RENESAS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the external charge-pump capacitor C1, typically 0.1 µF. |
| 2 | V+ | power_out | Internally generated positive supply, nominally +10 V, produced from VCC by the charge pump. |
| 3 | C1- | passive | Negative terminal of the external charge-pump capacitor C1. |
| 4 | C2+ | passive | Positive terminal of the external charge-pump capacitor C2. |
| 5 | C2- | passive | Negative terminal of the external charge-pump capacitor C2. |
| 6 | V- | power_out | Internally generated negative supply, nominally -10 V, produced by the charge-pump voltage inverter. |
| 7 | T2OUT | output | RS-232 transmitter 2 output at nominally ±10 V swing; short-circuit protected and can be shorted to ground indefinitely. |
| 8 | R2IN | input | RS-232 receiver 2 input accepting up to ±30 V, with 3 kΩ to 7 kΩ input impedance and an internal 5 kΩ pull-down to GND. |
| 9 | R2OUT | output | TTL/CMOS receiver 2 output, swinging between GND and VCC. |
| 10 | T2IN | input | TTL/CMOS-compatible transmitter 2 input with an internal 400 kΩ pull-up to VCC; an unused input may be left unconnected. |
| 11 | T1IN | input | TTL/CMOS-compatible transmitter 1 input with an internal 400 kΩ pull-up to VCC; an unused input may be left unconnected. |
| 12 | R1OUT | output | TTL/CMOS receiver 1 output, swinging between GND and VCC. |
| 13 | R1IN | input | RS-232 receiver 1 input accepting up to ±30 V, with 3 kΩ to 7 kΩ input impedance and an internal 5 kΩ pull-down to GND. |
| 14 | T1OUT | output | RS-232 transmitter 1 output at nominally ±10 V swing; short-circuit protected and can be shorted to ground indefinitely. |
| 15 | GND | power_in | Ground lead, connect to 0 V. |
| 16 | VCC | power_in | Power supply input, 5 V ±10% (HIN202). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Current | ICC | | 8 | 15 | mA | No Load, TA = 25°C (HIN202) | 7 |
| Supply voltage tolerance (VCC = 5V) | VCC | -10 | | 10 | % | VCC = +5V 10% (HIN207 is 5%) | 7 |
| Input Logic Low | VIL | | | 0.8 | V | TIN, EN, SD, EN, SD | 7 |
| Input Logic High (TIN) | VIH | 2 | | | V | TIN | 7 |
| Input Logic High (EN, SD) | VIH | 2.4 | | | V | EN, SD, EN, SD | 7 |
| Transmitter Input Pullup Current | IP | | 15 | 200 | µA | TIN = 0V | 7 |
| TTL/CMOS Receiver Output Voltage Low | VOL | | 0.1 | 0.4 | V | IOUT = 3.2mA (HIN202) | 7 |
| TTL/CMOS Receiver Output Voltage High | VOH | 3.5 | 4.6 | | V | IOUT = -1mA | 7 |
| TTL/CMOS Receiver Output Leakage | | | 0.05 | 10 | µA | EN = VCC, EN = 0, 0V < ROUT < VCC | 7 |
| RS-232 Input Voltage Range | VIN | -30 | | 30 | V | | 7 |
| Receiver Input Impedance | RIN | 3 | 5 | 7 | kΩ | TA = 25°C, VIN = 3V | 7 |
| Receiver Input Low Threshold (Active Mode) | VIN (H-L) | 0.8 | 1.2 | | V | VCC = 5V, TA = 25°C, Active Mode | 7 |
| Receiver Input High Threshold (Active Mode) | VIN (L-H) | | 1.7 | 2.4 | V | VCC = 5V, TA = 25°C, Active Mode | 7 |
| Receiver Input Hysteresis | VHYST | 0.2 | 0.5 | 1 | V | VCC = 5V, no hysteresis in shutdown mode | 7 |
| Baud Rate, 1 Transmitter Switching | | 120 | | | kbps | RL = 3k | 8 |
| Transmitter, Receiver Propagation Delay | tPD | | 0.5 | 10 | µs | HIN202, HIN206, HIN207, HIN208, HIN211 | 8 |
| Transition Region Slew Rate | SRT | 3 | | 30 | V/µs | RL = 3k, CL = 2500pF, measured from +3V to -3V or -3V to +3V, 1 Transmitter Switching (Note 2) | 8 |
| Output Voltage Swing, TOUT | TOUT | 5 | 9 | 10 | V | Transmitter Outputs, 3k to Ground | 8 |
| Output Resistance, TOUT | TOUT | 300 | | | Ω | VCC = V+ = V- = 0V, VOUT = 2V | 8 |
| RS-232 Output Short Circuit Current | ISC | | 10 | | mA | TOUT shorted to GND | 8 |
| VCC to Ground | VCC | -0.3 | | 6 | V | Referenced to GND: (GND -0.3V) < VCC < 6V | 7 |
| V+ to Ground | V+ | | | 12 | V | (VCC -0.3V) < V+ < 12V | 7 |
| V- to Ground | V- | -12 | | | V | -12V < V- < (GND +0.3V) | 7 |
| RIN input voltage | RIN | | | 30 | V | Printed as 30V | 7 |
| TIN input voltage | TIN | -0.3 | | | V | -0.3V < VIN < (V+ +0.3V) | 7 |
| ROUT output voltage | ROUT | -0.3 | | | V | (GND -0.3V) < VRXOUT < (V+ +0.3V) | 7 |
| Operating temperature range | | 0 | | 70 | °C | HIN2XXCX (HIN202CBZ commercial grade) | 7 |
| Thermal resistance, junction to ambient, 16 Ld SOIC (W) | θJA | | 100 | | °C/W | Typical, Note 1: component mounted on low effective thermal conductivity test board in free air | 7 |
| Maximum Junction Temperature (Plastic Package) | | | | 150 | °C | | 7 |
| Maximum Storage Temperature Range | | -65 | | 150 | °C | | 7 |
| Maximum Lead Temperature (Soldering) | | | | 300 | °C | Soldering 10s (SOIC and SSOP, lead tips only) | 7 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | C2- External capacitor (- terminal) is connected to this lead. TIN Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kpull-up resistor to VCC is connected to each lead. | 3 |
## CAD (KiCad official)
- Symbol: `HIN202CBZ`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `hin202cbz-etched.step` / `hin202cbz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hin202cbz.step` / `hin202cbz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/hin202cbz-datasheet.pdf) (20 pp, sha256 `2589abb4fe7ec19d`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hin202cbz-datasheet.pdf)