component
Hi7023H
Public Made by Adomby adom
Hichips(智芯) , SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHi7023H
Hichips(智芯) · IC · SOP-8
Hi7023H from Hichips(智芯), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the datasheet lists this pin as NC with no function. |
| 2 | PWM | input | PWM dimming input: the chip operates when high and the output is off when low, with VPWM absolute maximum of -0.3 to 7.0 V, detection thresholds of 1.4 V rising and 0.8 V falling, and pulses as short as 60 ns responded to; floating defaults to high. |
| 3 | VIN | power_in | Supply input: the chip starts above 4.7 V and turns off below 3.8 V, with an absolute maximum of -0.3 to 80 V, a recommended minimum operating voltage of 6.5 V, and a capacitor of more than 1 uF to GND placed next to the pin. |
| 4 | CS | input | Source of the internal power MOSFET and current-sense input, referenced to a 251 mV control voltage with an absolute maximum of -0.3 to 7.0 V, where output current is set by Iout = 0.251 V / Rcs. |
| 5 | D | output | Drain of the internal power MOSFET, rated for an absolute maximum of -0.3 to 100 V on the Hi7023H, and this pin requires heat-sinking treatment as noted by the datasheet. |
| 6 | D | output | Drain of the internal power MOSFET (second pin of the drain pair), rated for an absolute maximum of -0.3 to 100 V on the Hi7023H, and this pin requires heat-sinking treatment as noted by the datasheet. |
| 7 | GND | power_in | Chip ground pin, to be connected to the system ground. |
| 8 | GND | power_in | Chip ground pin (second ground pin), to be connected to the system ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hichips(智芯) |
| Package | SOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply input voltage (VIN) | VIN | -0.3 | 80 | V | 2 | ||
| MOS DRAIN output voltage (Hi7021/Hi7023H) | D | -0.3 | 100 | V | 2 | ||
| CS input voltage | VCS | -0.3 | 7 | V | 2 | ||
| PWM input voltage | VPWM | -0.3 | 7 | V | 2 | ||
| Operating temperature | TA | -40 | 125 | ℃ | 2 | ||
| Storage temperature | TSTG | -40 | 150 | ℃ | 2 | ||
| ESD human body model | HBM | 2 | KV | Human body model; printed as >2 | 2 | ||
| Static current | IIN | 1 | mA | VDIM=0V | 3 | ||
| VIN start voltage | Von | 4.7 | V | 3 | |||
| VIN shutdown voltage | Voff | 3.8 | V | 3 | |||
| System maximum operating frequency | OSC_MAX | 1000 | KHz | 3 | |||
| System minimum operating frequency | OSC_MIN | 30 | KHz | 3 | |||
| Constant-current control voltage (VREF) | VREF | 251 | mV | 3 | |||
| LEB time | TLEB | 120 | nS | 3 | |||
| Maximum duty cycle | DMAX | 100 | % | 3 | |||
| PWM dimming detection threshold upper limit | VPWM_H | 1.4 | V | PWM rising | 3 | ||
| PWM dimming detection threshold lower limit | VDIM_L | 0.8 | V | PWM falling | 3 | ||
| Over-temperature shutdown threshold | Tovt | 143 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
Hi7023H - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hi7023h-etched.step/hi7023h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hi7023h.step/hi7023h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hichips(智芯) datasheet (9 pp, sha256
3639737a3e5f43e5, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).