Generated by kicad-footprint-generator · KiCad file format 20260206
HGX487EIN
HGSEMI · RS-485 / RS-422 ICs · DIP-8
HGX487EIN from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: when RE is low, RO is high if A-B is at least +200 mV and low if A-B is at most -200 mV, and RO is high-impedance when RE is high. |
| 2 | RE | input | Active-low receiver output enable with a hot-plug input structure; RE high with DE low puts the device into low-power shutdown. |
| 3 | DE | input | Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low; DE low with RE high enters low-power shutdown, and DE uses a hot-plug input structure. |
| 4 | DI | input | Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Non-inverting bus terminal (A/Y) shared by the driver output and receiver input, with the common-mode and differential limits given in the DC characteristics. |
| 7 | B | bidirectional | Inverting bus terminal (B/Z) shared by the driver output and receiver input, with the common-mode and differential limits given in the DC characteristics. |
| 8 | VCC | power_in | Positive supply, 4.5 V ≤ VCC ≤ 5.5 V; connect a 0.1 µF capacitor to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | 6 | V | 4 | |||
| Control input voltage | RE, DE | -0.3 | 6 | V | 4 | ||
| Driver input voltage | DI | -0.3 | 6 | V | 4 | ||
| Driver output voltage | A, B, Y, Z | -7 | 12 | V | 4 | ||
| Receiver input voltage | A, B | -7 | 12 | V | 4 | ||
| Receiver output voltage | RO | -0.3 | V | 4 | |||
| Storage temperature | -65 | 150 | ℃ | 4 | |||
| Operating temperature, industrial grade | -40 | 85 | ℃ | HGX48_I (industrial grade; EIN suffix) | 4 | ||
| Continuous power dissipation, 8-pin plastic DIP | 725 | mW | TA=+70℃ | 4 | |||
| Supply voltage (recommended) | VCC | 4.5 | 5.5 | V | 5 | ||
| Differential driver output, RL=100Ω (RS-422) | VOD | 2.7 | V | Fig.1, RL=100Ω | 5 | ||
| Differential driver output, RL=54Ω (RS-485) | VOD | 2.1 | V | Fig.1, RL=54Ω | 5 | ||
| Change in magnitude of differential output voltage | ΔVOD | 0.2 | V | Fig.1, RL=100Ω or RL=54Ω | 5 | ||
| Driver common-mode output voltage | VOC | 3 | V | Fig.1, RL=100Ω or RL=54Ω | 5 | ||
| Change in magnitude of common-mode output voltage | ΔVOC | 0.2 | V | Fig.1, RL=100Ω or RL=54Ω | 5 | ||
| Input high voltage | VIH | 2 | V | DE, DI, RE | 5 | ||
| Input low voltage | VIL | 0.8 | V | DE, DI | 5 | ||
| Input current | IIN | -1 | 1 | μA | DE, DI, RE | 5 | |
| Input current (A, B), full duplex | IA, IB | 125 | μA | DE=GND, VCC=GND or VCC, VIN=12V | 5 | ||
| Input current (A, B), full duplex | IA, IB | -75 | μA | DE=GND, VCC=GND or VCC, VIN=-7V | 5 | ||
| Output leakage current (Y, Z), full duplex | IO | 125 | μA | DE=GND, VCC=GND or VCC, VIN=12V | 5 | ||
| Output leakage current (Y, Z), full duplex | IO | -100 | μA | DE=GND, VCC=GND or VCC, VIN=-7V | 5 | ||
| Driver short-circuit output current | IOSD | 250 | mA | 0≤VOUT≤12V | 5 | ||
| Driver short-circuit output current | IOSD | -250 | mA | -7≤VOUT≤VCC | 5 | ||
| Driver short-circuit foldback output current | IOSDF | 20 | mA | Vcc-1V≤VOUT≤Vcc+0.5V | 5 | ||
| Driver short-circuit foldback output current | IOSDF | -20 | mA | -0.5V≤VOUT≤+1V | 5 | ||
| Receiver differential threshold voltage | VTH | -200 | 200 | mV | -7V≤VCM≤12V | 5 | |
| Receiver output low voltage | VOL | 0.4 | V | IO=4mA, VID=-200mV | 5 | ||
| Receiver three-state output current | IOZR | -1 | 1 | μA | 0≤VO≤VCC | 5 | |
| Receiver input resistance | RIN | 96 | kΩ | -7V≤VCM≤12V | 5 | ||
| Receiver output short-circuit current | IOSR | -7 | 95 | mA | 0V≤VRO≤VCC | 5 | |
| Supply current, DE=VCC, RE=VCC | Icc | 530 | 900 | μA | No load, RE=VCC, DI=GND or VCC, DE=VCC | 6 | |
| Supply current, DE=GND, RE=VCC | Icc | 475 | 600 | μA | No load, RE=VCC, DI=GND or VCC, DE=GND | 6 | |
| Supply current, DE=VCC, RE=GND | Icc | 530 | 1000 | μA | No load, RE=GND, DI=GND or VCC, DE=VCC | 6 | |
| Supply current, DE=GND, RE=GND | Icc | 475 | 800 | μA | No load, RE=GND, DI=GND or VCC, DE=GND | 6 | |
| Standby mode supply current | ISHDN | 0.05 | 10 | μA | DE=GND, RE=VCC | 6 | |
| ESD protection, IEC61000-4-2 air-gap | -16 | 16 | kV | A, B, Y, Z; IEC61000-4-2 air-gap model | 6 | ||
| ESD protection, IEC61000-4-2 contact | -8 | 8 | kV | A, B, Y, Z; IEC61000-4-2 contact model | 6 | ||
| ESD protection, HBM | -4 | 4 | kV | All pins; HBM model | 6 | ||
| Driver propagation delay, low-to-high | tDPLH | 200 | 1000 | ns | Fig.2 & 5, RL=54Ω, CL=50pF | 8 | |
| Driver propagation delay, high-to-low | tDPHL | 200 | 1000 | ns | Fig.2 & 5, RL=54Ω, CL=50pF | 8 | |
| Driver output skew | tDSKEW | -140 | 140 | ns | Fig.2 & 5, RL=54Ω, CL=50pF | 8 | |
| Driver rise and fall time | tDR, tDF | 250 | 900 | ns | Fig.2 & 5, RL=54Ω, CL=50pF | 8 | |
| Driver enable to output high | tDZH | 2500 | ns | Fig.3 & 6, CL=100pF, S3 closed | 8 | ||
| Driver enable to output low | tDZL | 2500 | ns | Fig.3 & 6, CL=100pF, S2 closed | 8 | ||
| Driver disable time from low | tDLZ | 100 | ns | Fig.3 & 6, CL=15pF, S2 closed | 8 | ||
| Driver disable time from high | tDHZ | 100 | ns | Fig.3 & 6, CL=15pF, S3 closed | 8 | ||
| Driver enable from standby to output high | tDZH(SHDN) | 5500 | ns | Fig.3 & 6, CL=15pF, S3 closed | 8 | ||
| Driver enable from standby to output low | tDZL(SHDN) | 5500 | ns | Fig.3 & 6, CL=15pF, S2 closed | 8 | ||
| Standby time | tSHDN | 50 | 700 | ns | 8 | ||
| Receiver propagation delay | tRPLH, tRPHL | 200 | ns | CL=15pF, /VID/≥2.0V, VID≤15ns | 8 | ||
| Receiver output skew | tRSKEW | -30 | 30 | ns | CL=15pF, /VID/≥2.0V, VID≤15ns | 8 | |
| Receiver enable to output low | tRZL | 50 | ns | Fig.4 & 9, S1=-1.5V, S2 to VCC | 8 | ||
| Receiver enable to output high | tRZH | 50 | ns | Fig.4 & 9, S1=+1.5V, S2 to GND | 8 | ||
| Receiver disable time from low | tRLZ | 50 | ns | Fig.4 & 9, S1=-1.5V, S2 to VCC | 8 | ||
| Receiver disable time from high | tRHZ | 50 | ns | Fig.4 & 9, S1=+1.5V, S2 to GND | 8 | ||
| Receiver enable from standby to output high | tRZH(SHDN) | 5500 | ns | Fig.4 & 9, S1=-1.5V, S2 to VCC | 8 | ||
| Receiver enable from standby to output low | tRZL(SHDN) | 5500 | ns | Fig.4 & 9, S1=+1.5V, S2 to GND | 8 | ||
| Thermal shutdown temperature | TTS | 165 | ℃ | 5 |
CAD (KiCad official)
- Symbol:
HGX487EIN - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
hgx487ein-etched.step/hgx487ein-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hgx487ein.step/hgx487ein.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (24 pp, sha256
fa3b281d546bd63d, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).