main
History Download
Ray Publish 0.1.0 86d8aee

HGX3485ECMM

HGSEMI · RS-485 / RS-422 ICs · MSOP-8

HGX3485ECMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: with RE low, RO is high when A-B is at least 200 mV and low when A-B is at most -200 mV.
2 RE input Receiver output enable, active low: RO is high-impedance when RE is high, and RE high with DE low puts the device into low-power shutdown.
3 DE input Driver output enable: outputs are active when DE is high and high-impedance when DE is low.
4 DI input Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low.
5 GND power_in Ground; all voltages in the datasheet are referenced to this pin.
6 A bidirectional Receiver non-inverting input and driver non-inverting output on the bus, rated -7 V to +13 V.
7 B bidirectional Receiver inverting input and driver inverting output on the bus, rated -7 V to +13 V.
8 VCC power_in Supply pin; the device operates from 3.0 V to 3.6 V and the absolute maximum supply is +7 V.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package MSOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating supply voltage VCC 3 3.6 V 2
Operating temperature range (HGX3485EC, commercial) 0 70 ℃ 3
Supply voltage VCC 7 V 3
Control port voltage (RE, DE, DI) -0.3 7 V 3
Bus-side input voltage (A, B) -7 13 V 3
Receiver output voltage (RO) -0.3 7 V 3
Storage temperature range -60 150 ℃ 3
Soldering temperature range 260 ℃ 10s 3
Driver differential output voltage (RL=54Ω) VOD2 1.5 V 图 2,RL = 54Ω 4
Driver differential output voltage (RL=100Ω) VOD2 2 V 图 2,RL = 100 Ω 4
High-level input voltage VIH 2 V DE,DI,RE 4
Low-level input voltage VIL 0.8 V DE,DI,RE 4
Logic input current IIN1 -2 2 uA DE,DI,RE 4
Receiver input resistance RIN 12 kΩ -7V≦VCM≦12V 5
Receiver input hysteresis voltage Vhys 10 30 mV -7V≦VCM≦12V 5
Low-level output voltage VOL 0.4 V IOUT = +2.5mA, VID = -200 mV 5
Tri-state input leakage current IOZR -1 1 uA 0.4 V < VO < 2.4 V 5
Receiver short-circuit current IOSR -60 60 mA 0 V≤VO≤VCC 5
Supply current (RE=0V, DE=0V) ICC1 520 800 uA RE =0V,DE = 0 V 5
Supply current (RE=VCC, DE=VCC) ICC2 540 700 uA RE =VCC,DE=VCC 5
Shutdown current ISHDN 0.5 30 uA RE =VCC,DE=0V 5
ESD HBM (A/B pins) -15 15 kV HBM 人体模式 5
ESD MM (A/B pins) -800 800 V MM 机器模式 5
ESD contact discharge (A/B pins) -12 12 kV 接触放电 IEC 61000-4-2 5
ESD air discharge (A/B pins) -15 15 kV 空气放电 IEC 61000-4-2 5
ESD HBM (other pins) -4 4 kV HBM 人体模式 5
Driver differential output delay tDD 10 35 ns RDIFF = 60 Ω, CL1=CL2=100pF 6
Driver differential transition time tTD 12 25 ns 6
Driver propagation delay low-to-high tPLH 8 35 ns RDIFF = 27 Ω 6
Driver propagation delay high-to-low tPHL 8 35 ns 6
Driver propagation delay skew /tPLH-tPHL/ tPDS 1 8 ns 6
Driver enable to output high tPZH 20 90 ns RL = 110Ω 6
Driver enable to output low tPZL 20 90 ns 6
Driver input low to disable tPLZ 20 80 ns RL = 110Ω 6
Driver input high to disable tPHZ 20 80 ns 6
Driver enable to output high from shutdown tDSH 500 900 ns RL = 110Ω 6
Driver enable to output low from shutdown tDSL 500 900 ns 6
Receiver propagation delay low-to-high tRPLH 80 150 ns CL=15pF 7
Receiver propagation delay high-to-low tRPHL 80 150 ns 7
Receiver propagation delay skew /tRPLH-tRPHL/ tRPDS 7 10 ns 7
Receiver enable to output low tRPZL 20 50 ns CL=15pF 7
Receiver enable to output high tRPZH 20 50 ns CL=15pF 7
Receiver output low to disable tPRLZ 20 45 ns CL=15pF 7
Receiver output high to disable tPRHZ 20 45 ns CL=15pF 7
Receiver enable to output high from shutdown tRPSH 200 1400 ns CL=15pF 7
Receiver enable to output low from shutdown tRPSL 200 1400 ns CL=15pF 7
Time to enter shutdown tSHDN 80 300 ns NOTE2 7

CAD (KiCad official)

  • Symbol: HGX3485ECMM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: hgx3485ecmm-etched.step / hgx3485ecmm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hgx3485ecmm.step / hgx3485ecmm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (17 pp, sha256 6236ed989891b63a, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF