main
Ray hgx3087eim: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) f25113e
{
  "slug": "hgx3087eim",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI RS-485/RS-422 ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "comm-uart",
    "hgx3087eim"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hgx3087eim.kicad_sym",
    "hgx3087eim.kicad_mod",
    "hgx3087eim.glb",
    "hgx3087eim.step",
    "hgx3087eim.lbr",
    "docs/hero.png",
    "docs/hgx3087eim-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hgx3087eim-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HGX3087EIM",
    "manufacturer": "HGSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "RS-485/RS-422 ICs",
    "parts": {
      "symbol": "hgx3087eim.kicad_sym",
      "footprint": "hgx3087eim.kicad_mod",
      "model_3d": "hgx3087eim-etched.glb",
      "model_3d_plain": "hgx3087eim.glb",
      "model_3d_step": "hgx3087eim-etched.step",
      "model_3d_step_plain": "hgx3087eim.step",
      "lbr": "hgx3087eim.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input, 4.5V ≤ VCC ≤ 5.5V (nominal +5.0V). Bypass to GND with a 0.1µF ceramic capacitor placed close to the pin."
      },
      {
        "number": "2",
        "name": "RO",
        "type": "output",
        "description": "Receiver output. Outputs logic high when the differential receiver input (A - B) ≥ -50 mV and logic low when (A - B) ≤ -200 mV. Drives up to IO = ±4 mA at rail-referenced levels (VOH ≥ VCC-0.6V, VOL ≤ 0.4V)."
      },
      {
        "number": "3",
        "name": "DI",
        "type": "input",
        "description": "Driver (transmit) data input. Because the HGX3087E driver has no DE pin, the driver output is always enabled: DI low → Y=low, Z=high; DI high → Y=high, Z=low. CMOS logic thresholds (VIH ≥ 2V, VIL ≤ 0.8V)."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0V) for the device."
      },
      {
        "number": "5",
        "name": "Y",
        "type": "output",
        "description": "Driver non-inverting (true) differential output for the RS-485/RS-422 bus TX pair. Guaranteed differential VOD ≥ 2.1V into a 54Ω load (RS-485) and ≥ 2.7V into 100Ω (RS-422). Tolerates -7V to +12V bus fault voltages."
      },
      {
        "number": "6",
        "name": "Z",
        "type": "output",
        "description": "Driver inverting (complement) differential output for the RS-485/RS-422 bus TX pair. Complements Y; guaranteed differential VOD ≥ 2.1V into 54Ω. Tolerates -7V to +12V bus fault voltages."
      },
      {
        "number": "7",
        "name": "B",
        "type": "input",
        "description": "Receiver inverting differential input for the RS-485/RS-422 bus RX pair. Presents 1/8-unit-load impedance (RIN ≥ 96 kΩ). Tolerates -7V to +12V common-mode range and up to ±16 kV IEC 61000-4-2 ESD."
      },
      {
        "number": "8",
        "name": "A",
        "type": "input",
        "description": "Receiver non-inverting differential input for the RS-485/RS-422 bus RX pair. Presents 1/8-unit-load impedance (RIN ≥ 96 kΩ). True fail-safe: outputs logic high on RO when the pair is open, shorted, or idle-terminated."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:59:56Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "hgx3087eim.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hgx3087eim-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ddc3e40798b7980041765f35275bc71f9c502e813ede59a69707771aba3a88cb",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}