main
Ray hgx3085eim: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 1bfef91
{
  "slug": "hgx3085eim",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI RS-485 / RS-422 ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "hgx3085eim"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hgx3085eim.kicad_sym",
    "hgx3085eim.kicad_mod",
    "hgx3085eim.glb",
    "hgx3085eim.step",
    "hgx3085eim.lbr",
    "docs/hero.png",
    "docs/hgx3085eim-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hgx3085eim-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HGX3085EIM",
    "manufacturer": "HGSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "RS-485 / RS-422 ICs",
    "parts": {
      "symbol": "hgx3085eim.kicad_sym",
      "footprint": "hgx3085eim.kicad_mod",
      "model_3d": "hgx3085eim-etched.glb",
      "model_3d_plain": "hgx3085eim.glb",
      "model_3d_step": "hgx3085eim-etched.step",
      "model_3d_step_plain": "hgx3085eim.step",
      "lbr": "hgx3085eim.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "RO",
        "type": "output",
        "description": "Receiver output. When RE is low, RO is a logic high if (A - B) ≥ -50mV and a logic low if (A - B) ≤ -200mV. RO is high-impedance when the receiver is disabled (RE high) and true fail-safe holds RO high when the differential inputs are open or shorted."
      },
      {
        "number": "2",
        "name": "RE",
        "type": "input",
        "description": "Active-low receiver output enable (with hot-swap input structure). RO is enabled when RE is low and high-impedance when RE is high. Driving RE high while DE is low for >700ns places the device in low-power shutdown mode (ISHDN ≈ 0.05µA typ)."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Active-high driver output enable (with hot-swap input structure). Driver outputs A and B are active when DE is high and high-impedance when DE is low. Holding DE low with RE high enters low-power shutdown mode."
      },
      {
        "number": "4",
        "name": "DI",
        "type": "input",
        "description": "Driver data input. With DE high, a logic low on DI forces A/Y low and B/Z high; a logic high on DI forces A/Y high and B/Z low. VIH ≥ 2V, VIL ≤ 0.8V, input current ±1µA."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the transceiver."
      },
      {
        "number": "6",
        "name": "A",
        "type": "bidirectional",
        "description": "Non-inverting receiver input and non-inverting driver output (half-duplex bus line A/Y). Absolute maximum bus voltage -7V to +12V; receiver differential threshold -200mV to -50mV; driver differential output ≥ 2.1V into 54Ω; ±16kV IEC 61000-4-2 ESD protection."
      },
      {
        "number": "7",
        "name": "B",
        "type": "bidirectional",
        "description": "Inverting receiver input and inverting driver output (half-duplex bus line B/Z). Absolute maximum bus voltage -7V to +12V; receiver differential threshold -200mV to -50mV; driver differential output ≥ 2.1V into 54Ω; ±16kV IEC 61000-4-2 ESD protection."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, 4.5V ≤ VCC ≤ 5.5V. Bypass to GND with a 0.1µF ceramic capacitor placed close to the pin."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:59:53Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "hgx3085eim.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hgx3085eim-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "0897a91c1bef1ea87504b32fba2e8c16ff3fa8cb4edd98ddcc2dbd1916a64aca",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}