component
HGX232ECMT
Public Made by Adomby adom
HGSEMI RS232 ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHGX232ECMT
HGSEMI · RS232 ICs · TSSOP-16
HGX232ECMT from HGSEMI, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Connects to the external capacitor on the positive side of the voltage multiplier unit. |
| 2 | V+ | power_out | Positive voltage output of the multiplier unit; the datasheet gives a transmitter output high of 5.0 V minimum and an absolute maximum of VCC - 0.3 V to 14 V. |
| 3 | C1- | passive | Connects to the external capacitor on the negative side of the positive voltage multiplier unit. |
| 4 | C2+ | passive | Connects to the external capacitor on the positive side of the negative voltage multiplier unit. |
| 5 | C2- | passive | Connects to the external capacitor on the negative side of the negative voltage multiplier unit. |
| 6 | V- | power_out | Negative voltage output of the multiplier unit; the datasheet gives a transmitter output low of -5.0 V maximum and an absolute range of -0.3 V to -14 V. |
| 7 | T2OUT | output | Transmitter data output at RS-232 levels. |
| 8 | R2IN | input | Receiver data input at RS-232 levels, rated for receiver input voltage of -30 V to 30 V. |
| 9 | R2OUT | output | Receiver data output at TTL/CMOS levels. |
| 10 | T2IN | input | Transmitter data input at TTL/CMOS levels, with transmitter input voltage from 0 V to VCC. |
| 11 | T1IN | input | Transmitter data input at TTL/CMOS levels, with transmitter input voltage from 0 V to VCC. |
| 12 | R1OUT | output | Receiver data output at TTL/CMOS levels. |
| 13 | R1IN | input | Receiver data input at RS-232 levels, rated for receiver input voltage of -30 V to 30 V. |
| 14 | T1OUT | output | Transmitter data output at RS-232 levels. |
| 15 | GND | power_in | Common ground reference for the device. |
| 16 | VCC | power_in | Supply pin; the recommended supply voltage is 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| ICC static consumption current, Ta = 25℃ | ICC | 10 | mA | Ta = 25℃; VCC = 5.5 V, VIL = 0 V | 5 | ||
| ICC static consumption current, Ta = -40℃ to 85℃ | ICC | 14 | mA | Ta = -40℃ to 85℃; VCC = 5.5 V, VIL = 0 V | 5 | ||
| Receiver hysteresis voltage, Ta = 25℃ | Vh | 0.2 | 0.9 | V | Ta = 25℃; VCC = 5.0 V | 5 | |
| Receiver hysteresis voltage, Ta = -40℃ to 85℃ | Vh | 0.2 | 1 | V | Ta = -40℃ to 85℃; VCC = 5.0 V | 5 | |
| Receiver on (operation) voltage, Ta = 25℃ | VOn | 2.4 | V | Ta = 25℃; VO ≦ 0.1 V, IOL ≦ 20 mkA | 5 | ||
| Receiver on (operation) voltage, Ta = -40℃ to 85℃ | VOn | 2.3 | V | Ta = -40℃ to 85℃; VO ≦ 0.1 V, IOL ≦ 20 mkA | 5 | ||
| Receiver off (dropout) voltage, Ta = 25℃ | Voff | 0.8 | V | Ta = 25℃; VO ≧ VCC -0.1 V, IOH ≦ -20 mkA | 5 | ||
| Receiver off (dropout) voltage, Ta = -40℃ to 85℃ | Voff | 0.9 | V | Ta = -40℃ to 85℃; VO ≧ VCC -0.1 V, IOH ≦ -20 mkA | 5 | ||
| Receiver output low voltage, Ta = 25℃ | VOL | 0.3 | V | Ta = 25℃; IOL = 3.2 мА, VCC = 4.5 V, VIH = 2.4 V | 5 | ||
| Receiver output low voltage, Ta = -40℃ to 85℃ | VOL | 0.4 | V | Ta = -40℃ to 85℃; IOL = 3.2 мА, VCC = 4.5 V, VIH = 2.4 V | 5 | ||
| Receiver output high voltage, Ta = 25℃ | VOH | 3.6 | V | Ta = 25℃; IOH = -1.0 мА, VCC = 4.5 V, VIL = 0.8 V | 5 | ||
| Receiver output high voltage, Ta = -40℃ to 85℃ | VOH | 3.5 | V | Ta = -40℃ to 85℃; IOH = -1.0 мА, VCC = 4.5 V, VIL = 0.8 V | 5 | ||
| Receiver input resistance, Ta = 25℃ | RI | 3 | 7 | kOhm | Ta = 25℃; VCC = 5.0 V | 5 | |
| Receiver input resistance, Ta = -40℃ to 85℃ | RI | 3 | 7 | kOhm | Ta = -40℃ to 85℃; VCC = 5.0 V | 5 | |
| Transmitter output low voltage, Ta = 25℃ | VOL | -5.2 | V | Ta = 25℃; VCC = 4.5 V, VIH = 2.0 V, RL = 3.0 kOhm | 5 | ||
| Transmitter output low voltage, Ta = -40℃ to 85℃ | VOL | -5 | V | Ta = -40℃ to 85℃; VCC = 4.5 V, VIH = 2.0 V, RL = 3.0 kOhm | 5 | ||
| Transmitter output high voltage, Ta = 25℃ | VOH | 5.2 | V | Ta = 25℃; VCC = 4.5 V, VIL = 0.8 V, RL = 3.0 kOhm | 5 | ||
| Transmitter output high voltage, Ta = -40℃ to 85℃ | VOH | 5 | V | Ta = -40℃ to 85℃; VCC = 4.5 V, VIL = 0.8 V, RL = 3.0 kOhm | 5 | ||
| Input low current, Ta = 25℃ | IIL | -1 | mkA | Ta = 25℃; VCC = 5.5 V, VIL = 0 V | 5 | ||
| Input low current, Ta = -40℃ to 85℃ | IIL | -10 | mkA | Ta = -40℃ to 85℃; VCC = 5.5 V, VIL = 0 V | 5 | ||
| Input high current, Ta = 25℃ | IIH | 1 | mkA | Ta = 25℃; VCC = 5.5 V, VIH = VCC | 5 | ||
| Input high current, Ta = -40℃ to 85℃ | IIH | 10 | mkA | Ta = -40℃ to 85℃; VCC = 5.5 V, VIH = VCC | 5 | ||
| Speed of output front change, Ta = 25℃ | SR | 3 | 30 | V/mks | Ta = 25℃; VCC = 5.0 V, CL = 50 - 1000 pF, RL = 3.0 - 7.0 kOhm | 5 | |
| Speed of output front change, Ta = -40℃ to 85℃ | SR | 2.7 | 27 | V/mks | Ta = -40℃ to 85℃; VCC = 5.0 V, CL = 50 - 1000 pF, RL = 3.0 - 7.0 kOhm | 5 | |
| Output resistance, Ta = 25℃ | RO | 350 | Ohm | Ta = 25℃; VCC = V+ = V- = 0V, VO = 2 V | 5 | ||
| Output resistance, Ta = -40℃ to 85℃ | RO | 300 | Ohm | Ta = -40℃ to 85℃; VCC = V+ = V- = 0V, VO = 2 V | 5 | ||
| Short circuit output current, Ta = 25℃ | ISC | -50 | 50 | mA | Ta = 25℃; VCC = 5.5 V, VO = 0V, VI = VCC, VI = 0V | 5 | |
| Short circuit output current, Ta = -40℃ to 85℃ | ISC | -60 | 60 | mA | Ta = -40℃ to 85℃; VCC = 5.5 V, VO = 0V, VI = VCC, VI = 0V | 5 | |
| Speed of information transmission, Ta = 25℃ | ST | 140 | kbit/с | Ta = 25℃; VCC = 4.5 V, CL = 1000pF, RL = 3.0 kOhm, tW = 7mks (for extreme -tW = 8mks) | 5 | ||
| Speed of information transmission, Ta = -40℃ to 85℃ | ST | 120 | kbit/с | Ta = -40℃ to 85℃; VCC = 4.5 V, CL = 1000pF, RL = 3.0 kOhm, tW = 7mks (for extreme -tW = 8mks) | 5 | ||
| Signal propagation delay time when switching on (off), receiver, Ta = 25℃ | tPHLR (tPLHR) | 9.7 | mks | Ta = 25℃; VCC = 4.5 V, CL = 150 pF, VIL = 0 V, VIH = 3.0 V, tLH = tHL ≦ 10 ns | 6 | ||
| Signal propagation delay time when switching on (off), receiver, Ta = -40℃ to 85℃ | tPHLR (tPLHR) | 10 | mks | Ta = -40℃ to 85℃; VCC = 4.5 V, CL = 150 pF, VIL = 0 V, VIH = 3.0 V, tLH = tHL ≦ 10 ns | 6 | ||
| Signal propagation delay time when switching on (off), transmitter, Ta = 25℃ | tPHLT (tPLHT) | 5 | mks | Ta = 25℃; VCC = 4.5 V, CL = 2500 pF, VIL = 0 V, VIH = 3.0 V, RL = 3 kOhm, tLH = tHL ≦ 10 ns | 6 | ||
| Signal propagation delay time when switching on (off), transmitter, Ta = -40℃ to 85℃ | tPHLT (tPLHT) | 6 | mks | Ta = -40℃ to 85℃; VCC = 4.5 V, CL = 2500 pF, VIL = 0 V, VIH = 3.0 V, RL = 3 kOhm, tLH = tHL ≦ 10 ns | 6 | ||
| Supply voltage (recommended operating) | VCC | 4.5 | 5.5 | V | 3 | ||
| Transmitter output high voltage (recommended operating) | V+ | 5 | V | 3 | |||
| Transmitter output low voltage (recommended operating) | V- | -5 | V | 3 | |||
| Transmitter input voltage (recommended operating) | VTIN | 0 | V | 3 | |||
| Receiver input voltage (recommended operating) | VRIN | -30 | 30 | V | 3 | ||
| Transmitter short circuit output current (recommended operating) | ISC | -60 | 60 | mA | 3 | ||
| Ambient temperature, HGX232EC grade (recommended operating) | Ta | 0 | 70 | ℃ | HGX232EC | 3 | |
| Supply voltage (absolute maximum) | VCC | -0.3 | 6 | V | 3 | ||
| Transmitter high output voltage (absolute maximum) | V+ | 14 | V | 3 | |||
| Transmitter low output voltage (absolute maximum) | V- | -14 | -0.3 | V | 3 | ||
| Transmitter input voltage (absolute maximum) | VTIN | -0.3 | V | 3 | |||
| Receiver input voltage (absolute maximum) | VRIN | -30 | 30 | V | 3 | ||
| Ambient temperature (absolute maximum) | Ta | -60 | 150 | ℃ | 3 | ||
| Lead temperature (soldering) | TL | 260 | ℃ | Soldering, 10 seconds | 3 |
CAD (KiCad official)
- Symbol:
HGX232ECMT - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
hgx232ecmt-etched.step/hgx232ecmt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hgx232ecmt.step/hgx232ecmt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (11 pp, sha256
10f1bf5b12850453, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).