← Commit history

hgx13433eim: factory component page (tier=lcsc)

Ray ·f160f498d9 · ·parent ced9c9e
1 file changed +162−8
page.json+162−8
@@ -1,13 +1,172 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "hgx13433eim",+  "title": "HGX13433EIM",+  "brief": "HGSEMI RS-485 / RS-422 ICs, SOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "HGSEMI RS-485 / RS-422 ICs, SOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "interface",     "hgx13433eim"   ],+  "component": {+    "mpn": "HGX13433EIM",+    "manufacturer": "HGSEMI",+    "package": "SOP-14",+    "pin_count": 14,+    "category": "Interface",+    "subcategory": "RS-485 / RS-422 ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603082493310750720",+    "parts": {+      "symbol": "hgx13433eim.kicad_sym",+      "footprint": "hgx13433eim.kicad_mod",+      "model_3d": "hgx13433eim.glb",+      "model_3d_step": "hgx13433eim.step",+      "lbr": "hgx13433eim.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VL",+        "type": "power_in",+        "description": "Logic-interface supply input (1.62 V to VCC). Powers the low-voltage logic side (including RO output). Bypass to GND with a 0.1 \u00b5F capacitor placed as close to the pin as possible."+      },+      {+        "number": "2",+        "name": "RO",+        "type": "output",+        "description": "Receiver output. When receiver is enabled: RO is high if V(A)-V(B) > -50 mV, low if V(A)-V(B) < -200 mV. Output swings between GND and VL."+      },+      {+        "number": "3",+        "name": "DE",+        "type": "input",+        "description": "Driver output enable (active high). DE=high enables the driver; DE=low places Y/Z outputs in high-impedance. With RE=high and DE=low the chip enters low-power shutdown."+      },+      {+        "number": "4",+        "name": "RE",+        "type": "input",+        "description": "Receiver output enable, active low (RE with overbar). RE=low enables RO; RE=high disables the receiver. With RE=high and DE=low the chip enters low-power shutdown."+      },+      {+        "number": "5",+        "name": "DI",+        "type": "input",+        "description": "Driver input. DI=low forces Y=low and Z=high; DI=high forces Y=high and Z=low. Logic levels referenced to VL (VIH \u2265 2/3\u00b7VL, VIL \u2264 1/3\u00b7VL)."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference. Tie to system ground; internally common with pin 8."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect. Leave floating or tie to GND per PCB convention; not internally bonded to any function."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference. Tie to system ground; internally common with pin 6."+      },+      {+        "number": "9",+        "name": "Y",+        "type": "bidirectional",+        "description": "Driver non-inverting output / receiver non-inverting input on the transmit-pair side (full-duplex RS-422). Bus pin, rated -8 V to +13 V, \u00b115 kV HBM ESD."+      },+      {+        "number": "10",+        "name": "Z",+        "type": "bidirectional",+        "description": "Driver inverting output / receiver inverting input on the transmit-pair side (full-duplex RS-422). Bus pin, rated -8 V to +13 V, \u00b115 kV HBM ESD."+      },+      {+        "number": "11",+        "name": "B",+        "type": "input",+        "description": "Receiver inverting input (receive pair). 1/8 unit-load input impedance (typ. 96 k\u03a9), allowing up to 256 transceivers on the bus. Bus pin, \u00b115 kV HBM / \u00b112 kV IEC 61000-4-2 contact ESD."+      },+      {+        "number": "12",+        "name": "A",+        "type": "input",+        "description": "Receiver non-inverting input (receive pair). 1/8 unit-load input impedance (typ. 96 k\u03a9). Bus pin, \u00b115 kV HBM / \u00b112 kV IEC 61000-4-2 contact ESD."+      },+      {+        "number": "13",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect. Leave floating or tie to GND per PCB convention; not internally bonded to any function."+      },+      {+        "number": "14",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply, 3.0 V to 5.5 V (typ. 3.3 V/5 V). Bypass to GND with a 0.1 \u00b5F capacitor placed close to the pin."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603082493310750720",+        "pages": null,+        "sha256": "72c83ad22f74e434",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "HGSEMI",+      "Package": "SOP-14",+      "Category": "Interface",+      "Pins": "14"+    }+  },+  "variants": [+    {+      "mpn": "HGX13433EIM/TR",+      "kind": "packaging"+    },+    {+      "mpn": "HGX13433EIMT/TR",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "hgx13433eim"+  ],+  "discovery_pitch": "HGX13433EIM (HGSEMI) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +184,5 @@     "docs/hgx13433eim-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file