← Commit history
hgv6042m: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "HGV6042M",+ "manufacturer": "HGSEMI",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Operational Amplifier",+ "parts": {+ "symbol": "hgv6042m.kicad_sym",+ "footprint": "hgv6042m.kicad_mod",+ "model_3d": "hgv6042m-etched.glb",+ "model_3d_plain": "hgv6042m.glb",+ "model_3d_step": "hgv6042m-etched.step",+ "model_3d_step_plain": "hgv6042m.step",+ "lbr": "hgv6042m.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OUTA",+ "type": "output",+ "description": "Amplifier A output. Rail-to-rail push-pull output; typically swings to within ~50 mV of either supply rail into light resistive loads (>50 kΩ), with typical source/sink current of 20 mA into a 10 Ω load to VS/2."+ },+ {+ "number": "2",+ "name": "INA-",+ "type": "input",+ "description": "Amplifier A inverting input. High-impedance CMOS input with ~1 pA typical bias current; usable common-mode range extends from VSS-0.1 V to VDD+0.1 V."+ },+ {+ "number": "3",+ "name": "INA+",+ "type": "input",+ "description": "Amplifier A non-inverting input. High-impedance CMOS input with ~1 pA typical bias current; rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V)."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Negative supply / ground. In single-supply operation tie to GND; in dual-supply operation this is the negative rail (as low as -2.75 V, with VDD-VSS ≤ 5.5 V operating, 7.5 V absolute maximum). Bypass to ground with a 0.1 µF ceramic capacitor when used as a negative rail."+ },+ {+ "number": "5",+ "name": "INB+",+ "type": "input",+ "description": "Amplifier B non-inverting input. High-impedance CMOS input with ~1 pA typical bias current; rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V)."+ },+ {+ "number": "6",+ "name": "INB-",+ "type": "input",+ "description": "Amplifier B inverting input. High-impedance CMOS input with ~1 pA typical bias current; usable common-mode range extends from VSS-0.1 V to VDD+0.1 V."+ },+ {+ "number": "7",+ "name": "OUTB",+ "type": "output",+ "description": "Amplifier B output. Rail-to-rail push-pull output; typically swings to within ~50 mV of either supply rail into light resistive loads (>50 kΩ), with typical source/sink current of 20 mA into a 10 Ω load to VS/2."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply. Operating range 1.4 V to 5.5 V (VDD-VSS), absolute maximum 7.5 V. Place a 0.1 µF ceramic bypass capacitor close to this pin for best performance."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}