main
Ray
Publish 0.1.0
2d13f80
HGC555IMM
HGSEMI · Timers · MSOP-8
HGC555IMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for all voltages. |
| 2 | TRIGGER | input | Active-low trigger input; output goes high when trigger is below 1/3 VCC (input range -0.3 V to VCC+0.3 V). |
| 3 | OUTPUT | output | Timer output that can source and sink current to drive TTL/CMOS (recommended up to 20 mA, absolute max 100 mA). |
| 4 | RESET | input | Active-low reset input that forces OUTPUT low and turns discharge ON when low (input range -0.3 V to VCC+0.3 V). |
| 5 | CONTROL VOLTAGE | input | Control voltage input that sets the comparator threshold at about 0.65 VCC to 0.69 VCC at 25 °C, with no decoupling required for stable operation. |
| 6 | THRESHOLD | input | Threshold comparator input; output goes low when above 2/3 VCC (input range -0.3 V to VCC+0.3 V). |
| 7 | DISCHARGE | passive | Discharge output that is ON when OUTPUT is low and OFF when OUTPUT is high, used to discharge the timing capacitor. |
| 8 | VCC | power_in | Positive supply voltage, 2.0 V to 18.0 V recommended operating, 18.0 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Clock And Timing |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (recommended) | VCC | 2 | 18 | V | 3 | ||
| Output Current (recommended) | IO | 20 | mA | 3 | |||
| Operating Temperature (recommended) | TOPR | -40 | 85 | °C | 3 | ||
| Supply Voltage (absolute max) | VCC | 0 | 18 | V | 3 | ||
| Output Current (absolute max) | IO | 100 | mA | 3 | |||
| Input Voltage | VTH, VTRIG, VRST | -0.3 | V | max is VCC+0.3 | 3 | ||
| Power Dissipation | PD | 200 | mW | 3 | |||
| Operating Temperature (absolute max) | TOPR | -40 | 85 | °C | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 | ||
| Lead Temperature | TSOLDER | 245 | °C | 1 mm from case for 10 seconds | 3 | ||
| Threshold Voltage (25±10 °C) | VTH | 0.65 | 0.7 | V | VCC=5.0 V, 25±10 °C; min/max are multiples of VCC (0.65 VCC to 0.70 VCC) | 4 | |
| Threshold Voltage (-20 to 70 °C) | VTH | 0.6 | 0.8 | V | VCC=5.0 V, -20, 70 °C; min/max are multiples of VCC (0.60 VCC to 0.80 VCC) | 4 | |
| Trigger Voltage (25±10 °C) | VTRIG | 0.31 | 0.36 | V | VCC=5.0 V, 25±10 °C; multiples of VCC (0.31 VCC to 0.36 VCC) | 4 | |
| Trigger Voltage (-20 to 70 °C) | VTRIG | 0.28 | 0.4 | V | VCC=5.0 V, -20, 70 °C; multiples of VCC (0.28 VCC to 0.40 VCC) | 4 | |
| Reset Voltage (25±10 °C) | VRST | 0.4 | 1 | V | VCC=2.0 V and 18.0 V, 25±10 °C | 4 | |
| Reset Voltage (-20 to 70 °C) | VRST | 0.2 | 1.5 | V | VCC=2.0 V and 18.0 V, -20, 70 °C | 4 | |
| Control Voltage Lead (25 °C) | VCV | 0.65 | 0.69 | V | 25 10 °C; multiples of VCC (0.65 VCC to 0.69 VCC) | 4 | |
| Control Voltage Lead (-20 to 70 °C) | VCV | 0.6 | 0.8 | V | -20, 70 °C; multiples of VCC (0.60 VCC to 0.80 VCC) | 4 | |
| Output Voltage Low (5 V, 25±10 °C) | VOL | 0.4 | V | IOL = 3.2 mA, VCC=5.0 V, 25±10 °C | 4 | ||
| Output Voltage Low (15 V, 25±10 °C) | VOL | 1 | V | IOL = 20 mA, VCC=15.0 V, 25±10 °C | 4 | ||
| Output Voltage Low (5 V, -20 to 70 °C) | VOL | 0.6 | V | IOL = 3.2 mA, VCC=5.0 V, -20, 70 °C | 4 | ||
| Output Voltage Low (15 V, -20 to 70 °C) | VOL | 1.5 | V | IOL = 20 mA, VCC=15.0 V, -20, 70 °C | 4 | ||
| Output Voltage High (5 V, 25±10 °C) | VOH | 4 | V | IOH = -0.8 mA, VCC=5.0 V, 25±10 °C | 4 | ||
| Output Voltage High (15 V, 25±10 °C) | VOH | 14.3 | V | IOH = -0.8 mA, VCC=15.0 V, 25±10 °C | 4 | ||
| Output Voltage High (5 V, -20 to 70 °C) | VOH | 3.5 | V | IOH = -0.8 mA, VCC=5.0 V, -20, 70 °C | 4 | ||
| Output Voltage High (15 V, -20 to 70 °C) | VOH | 14 | V | IOH = -0.8 mA, VCC=15.0 V, -20, 70 °C | 4 | ||
| Supply Current (2 V, 25±10 °C) | ICC | 200 | µA | VCC=2.0 V, 25±10 °C | 4 | ||
| Supply Current (18 V, 25±10 °C) | ICC | 300 | µA | VCC=18.0 V, 25±10 °C | 4 | ||
| Supply Current (2 V, -20 to 70 °C) | ICC | 400 | µA | VCC=2.0 V, -20, 70 °C | 4 | ||
| Supply Current (18 V, -20 to 70 °C) | ICC | 600 | µA | VCC=18.0 V, -20, 70 °C | 4 | ||
| Rise (Fall) Time of Output (25±10 °C) | tTHL, tTLH | 35 | 75 | ns | RL = 10 MΩ, CL = 10 pF, VCC=5.0 V, 25±10 °C | 5 | |
| Rise (Fall) Time of Output (-20 to 70 °C) | tTHL, tTLH | 70 | 150 | ns | RL = 10 MΩ, CL = 10 pF, VCC=5.0 V, -20, 70 °C | 5 | |
| Guaranteed Max Osc Freq (25±10 °C) | fMAX | 500 | kHz | Astable operation, VCC=2.0-18.0 V, 25±10 °C | 5 | ||
| Guaranteed Max Osc Freq (-20 to 70 °C) | fMAX | 200 | kHz | Astable operation, VCC=2.0-18.0 V, -20, 70 °C | 5 | ||
| Initial accuracy | f | 5 | % | RL = 1-100 kΩ, CL = 0.1 µF | 5 | ||
| Drift with Temperature (5 V) | f | 0.02 | %/°C | VCC=5.0 V, -20, 70 °C | 5 | ||
| Drift with Temperature (10 V) | f | 0.03 | %/°C | VCC=10.0 V, -20, 70 °C | 5 | ||
| Drift with Temperature (15 V) | f | 0.06 | %/°C | VCC=15.0 V, -20, 70 °C | 5 | ||
| Drift with Supply Voltage (25±10 °C) | f | 3 | %/В | VCC=5.0 V, 25±10 °C | 5 | ||
| Drift with Supply Voltage (-20 to 70 °C) | f | 6 | %/В | VCC=5.0 V, -20, 70 °C | 5 |
CAD (KiCad official)
- Symbol:
HGC555IMM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
hgc555imm-etched.step/hgc555imm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hgc555imm.step/hgc555imm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (9 pp, sha256
7d27a57bcd8b37f6, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HGC555IMM
**HGSEMI** · Timers · MSOP-8
HGC555IMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for all voltages. |
| 2 | TRIGGER | input | Active-low trigger input; output goes high when trigger is below 1/3 VCC (input range -0.3 V to VCC+0.3 V). |
| 3 | OUTPUT | output | Timer output that can source and sink current to drive TTL/CMOS (recommended up to 20 mA, absolute max 100 mA). |
| 4 | RESET | input | Active-low reset input that forces OUTPUT low and turns discharge ON when low (input range -0.3 V to VCC+0.3 V). |
| 5 | CONTROL VOLTAGE | input | Control voltage input that sets the comparator threshold at about 0.65 VCC to 0.69 VCC at 25 °C, with no decoupling required for stable operation. |
| 6 | THRESHOLD | input | Threshold comparator input; output goes low when above 2/3 VCC (input range -0.3 V to VCC+0.3 V). |
| 7 | DISCHARGE | passive | Discharge output that is ON when OUTPUT is low and OFF when OUTPUT is high, used to discharge the timing capacitor. |
| 8 | VCC | power_in | Positive supply voltage, 2.0 V to 18.0 V recommended operating, 18.0 V absolute maximum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Clock And Timing |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (recommended) | VCC | 2 | | 18 | V | | 3 |
| Output Current (recommended) | IO | | | 20 | mA | | 3 |
| Operating Temperature (recommended) | TOPR | -40 | | 85 | °C | | 3 |
| Supply Voltage (absolute max) | VCC | 0 | | 18 | V | | 3 |
| Output Current (absolute max) | IO | | | 100 | mA | | 3 |
| Input Voltage | VTH, VTRIG, VRST | -0.3 | | | V | max is VCC+0.3 | 3 |
| Power Dissipation | PD | | | 200 | mW | | 3 |
| Operating Temperature (absolute max) | TOPR | -40 | | 85 | °C | | 3 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 3 |
| Lead Temperature | TSOLDER | | | 245 | °C | 1 mm from case for 10 seconds | 3 |
| Threshold Voltage (25±10 °C) | VTH | 0.65 | | 0.7 | V | VCC=5.0 V, 25±10 °C; min/max are multiples of VCC (0.65 VCC to 0.70 VCC) | 4 |
| Threshold Voltage (-20 to 70 °C) | VTH | 0.6 | | 0.8 | V | VCC=5.0 V, -20, 70 °C; min/max are multiples of VCC (0.60 VCC to 0.80 VCC) | 4 |
| Trigger Voltage (25±10 °C) | VTRIG | 0.31 | | 0.36 | V | VCC=5.0 V, 25±10 °C; multiples of VCC (0.31 VCC to 0.36 VCC) | 4 |
| Trigger Voltage (-20 to 70 °C) | VTRIG | 0.28 | | 0.4 | V | VCC=5.0 V, -20, 70 °C; multiples of VCC (0.28 VCC to 0.40 VCC) | 4 |
| Reset Voltage (25±10 °C) | VRST | 0.4 | | 1 | V | VCC=2.0 V and 18.0 V, 25±10 °C | 4 |
| Reset Voltage (-20 to 70 °C) | VRST | 0.2 | | 1.5 | V | VCC=2.0 V and 18.0 V, -20, 70 °C | 4 |
| Control Voltage Lead (25 °C) | VCV | 0.65 | | 0.69 | V | 25 10 °C; multiples of VCC (0.65 VCC to 0.69 VCC) | 4 |
| Control Voltage Lead (-20 to 70 °C) | VCV | 0.6 | | 0.8 | V | -20, 70 °C; multiples of VCC (0.60 VCC to 0.80 VCC) | 4 |
| Output Voltage Low (5 V, 25±10 °C) | VOL | | | 0.4 | V | IOL = 3.2 mA, VCC=5.0 V, 25±10 °C | 4 |
| Output Voltage Low (15 V, 25±10 °C) | VOL | | | 1 | V | IOL = 20 mA, VCC=15.0 V, 25±10 °C | 4 |
| Output Voltage Low (5 V, -20 to 70 °C) | VOL | | | 0.6 | V | IOL = 3.2 mA, VCC=5.0 V, -20, 70 °C | 4 |
| Output Voltage Low (15 V, -20 to 70 °C) | VOL | | | 1.5 | V | IOL = 20 mA, VCC=15.0 V, -20, 70 °C | 4 |
| Output Voltage High (5 V, 25±10 °C) | VOH | 4 | | | V | IOH = -0.8 mA, VCC=5.0 V, 25±10 °C | 4 |
| Output Voltage High (15 V, 25±10 °C) | VOH | 14.3 | | | V | IOH = -0.8 mA, VCC=15.0 V, 25±10 °C | 4 |
| Output Voltage High (5 V, -20 to 70 °C) | VOH | 3.5 | | | V | IOH = -0.8 mA, VCC=5.0 V, -20, 70 °C | 4 |
| Output Voltage High (15 V, -20 to 70 °C) | VOH | 14 | | | V | IOH = -0.8 mA, VCC=15.0 V, -20, 70 °C | 4 |
| Supply Current (2 V, 25±10 °C) | ICC | | | 200 | µA | VCC=2.0 V, 25±10 °C | 4 |
| Supply Current (18 V, 25±10 °C) | ICC | | | 300 | µA | VCC=18.0 V, 25±10 °C | 4 |
| Supply Current (2 V, -20 to 70 °C) | ICC | | | 400 | µA | VCC=2.0 V, -20, 70 °C | 4 |
| Supply Current (18 V, -20 to 70 °C) | ICC | | | 600 | µA | VCC=18.0 V, -20, 70 °C | 4 |
| Rise (Fall) Time of Output (25±10 °C) | tTHL, tTLH | 35 | | 75 | ns | RL = 10 MΩ, CL = 10 pF, VCC=5.0 V, 25±10 °C | 5 |
| Rise (Fall) Time of Output (-20 to 70 °C) | tTHL, tTLH | 70 | | 150 | ns | RL = 10 MΩ, CL = 10 pF, VCC=5.0 V, -20, 70 °C | 5 |
| Guaranteed Max Osc Freq (25±10 °C) | fMAX | 500 | | | kHz | Astable operation, VCC=2.0-18.0 V, 25±10 °C | 5 |
| Guaranteed Max Osc Freq (-20 to 70 °C) | fMAX | 200 | | | kHz | Astable operation, VCC=2.0-18.0 V, -20, 70 °C | 5 |
| Initial accuracy | f | | 5 | | % | RL = 1-100 kΩ, CL = 0.1 µF | 5 |
| Drift with Temperature (5 V) | f | | 0.02 | | %/°C | VCC=5.0 V, -20, 70 °C | 5 |
| Drift with Temperature (10 V) | f | | 0.03 | | %/°C | VCC=10.0 V, -20, 70 °C | 5 |
| Drift with Temperature (15 V) | f | | 0.06 | | %/°C | VCC=15.0 V, -20, 70 °C | 5 |
| Drift with Supply Voltage (25±10 °C) | f | | 3 | | %/В | VCC=5.0 V, 25±10 °C | 5 |
| Drift with Supply Voltage (-20 to 70 °C) | f | | 6 | | %/В | VCC=5.0 V, -20, 70 °C | 5 |
## CAD (KiCad official)
- Symbol: `HGC555IMM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `hgc555imm-etched.step` / `hgc555imm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hgc555imm.step` / `hgc555imm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hgc555imm-datasheet.pdf) (9 pp, sha256 `7d27a57bcd8b37f6`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hgc555imm-datasheet.pdf)