← Commit history
hg9910m: factory component page (tier=lcsc)
4 files changed
+33−29
README.md+9−8@@ -8,14 +8,14 @@ HG9910M from HGSEMI, in a SOIC-8. Pinout and pin descriptions extracted from the | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VIN | power_in | Input DC supply voltage. Operates from 8 V to 450 V DC (absolute max 470 V). Feeds the internal linear regulator that generates VDD. |-| 2 | CS | input | Current-sense input. Senses LED string current through an external sense resistor; the internal comparator trips at V_CS(hi) ≈ 250 mV (225-275 mV) to terminate the GATE on-time. Absolute max −0.3 V to +15.8 V. |-| 3 | GND | power_in | Device ground reference for all internal circuitry and the return for CS, LD, PWMD, Rosc, and GATE signals. |-| 4 | GATE | output | Gate driver output for the external switching MOSFET. Swings from GND to VDD (~7.5 V), with typical rise/fall times of 30 ns into a 500 pF load. IOUT rated at ±10 mA characterization. |-| 5 | PWMD | input | Low-frequency PWM dimming input, also serves as chip Enable. Accepts a 0-100 % duty-cycle signal up to a few kHz. VIL ≤ 1.0 V, VIH ≥ 2.4 V. Has an internal ~100 kΩ pull-down to GND (50-150 kΩ). Tie high or leave floating with external pull-up to enable. Absolute max −0.3 V to +15.1 V. |-| 6 | VDD | power_out | Internally regulated supply output, 7.5 V nominal (7.0-8.0 V). Can source up to 1 mA for external circuitry (VIN = 8-100 V). Requires an external storage/bypass capacitor. UVLO ≈ 6.7 V with 500 mV hysteresis. Absolute max 13.5 V when externally driven. |-| 7 | LD | input | Linear dimming input. External analog voltage (0-250 mV range) sets the current-sense comparator threshold, scaling the LED current from zero to its programmed maximum. Absolute max −0.3 V to +15.1 V. |-| 8 | Rosc | passive | Oscillator frequency-setting pin. An external resistor to GND programs the PWM switching frequency (e.g., Rosc = 1.00 MΩ → 25 kHz typ; Rosc = 226 kΩ → 100 kHz typ). Frequency programmable up to 300 kHz. |+| 1 | VIN | power_in | Input voltage supply, 8V to 450V DC. Absolute maximum 470V. Feeds the internal linear regulator that generates VDD. |+| 2 | CS | input | Current sense input. Senses the LED string / MOSFET source current via an external sense resistor. Internal pull-in threshold is 250 mV typical (225-275 mV). Absolute maximum -0.3V to +15.8V. |+| 3 | GND | power_in | Device ground reference for all internal circuitry. |+| 4 | GATE | output | Gate drive output for the external switching MOSFET. High output at VDD (7.5V nom), rise/fall time ~30 ns typ into 500 pF. Absolute maximum -0.3V to +15.8V. |+| 5 | PWMD | input | Low-frequency PWM dimming pin, also functions as enable input. Internal 100kΩ (50-150kΩ) pull-down to GND. VIL max 1.0V, VIH min 2.4V. Accepts 0-100% duty cycle up to a few kHz. |+| 6 | VDD | power_out | Internally regulated supply voltage output, 7.5V nominal (7.0-8.0V). Can source up to 1mA for external circuitry. Requires an external storage capacitor to hold up the rail near AC input zero-crossings. Absolute maximum 13.5V. |+| 7 | LD | input | Linear dimming input. Adjusts the current-sense comparator threshold (voltage range 0 to 250 mV) to modulate LED current linearly. Absolute maximum -0.3V to +15.1V. |+| 8 | ROSC | input | Oscillator programming pin. An external resistor from this pin to GND sets the PWM switching frequency (e.g. 1.00 MΩ → ~25 kHz, 226 kΩ → ~100 kHz, up to ~300 kHz). | ## Key specifications @@ -29,6 +29,7 @@ HG9910M from HGSEMI, in a SOIC-8. Pinout and pin descriptions extracted from the ## Ordering variants - `HG9910MM/TR`+- `HG9910MM` - `HG9910MN` ## CAD (KiCad official)
hg9910m.kicad_sym+2−2@@ -24,8 +24,8 @@ (name "GATE" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27)))) )- (pin passive line (at 17.78 2.54 180) (length 5.08)- (name "Rosc" (effects (font (size 1.27 1.27))))+ (pin input line (at 17.78 2.54 180) (length 5.08)+ (name "ROSC" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27)))) ) (pin input line (at 17.78 0.00 180) (length 5.08)
hg9910m.lbr+11−5@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>HGSEMI LED Drivers, SOIC-8</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm"> <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="HG9910M">+ <description>HGSEMI LED Drivers, SOIC-8</description> <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/> <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -96,7 +97,7 @@ <pin name="CS" x="-17.78" y="0" length="middle" direction="in"/> <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/> <pin name="GATE" x="-17.78" y="-5.08" length="middle" direction="out"/>- <pin name="Rosc" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="ROSC" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/> <pin name="LD" x="17.78" y="0" length="middle" direction="in" rot="R180"/> <pin name="VDD" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/> <pin name="PWMD" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="HG9910M" prefix="U">- <description></description>+ <description>HGSEMI LED Drivers, SOIC-8</description> <gates> <gate name="G$1" symbol="HG9910M" x="0" y="0"/> </gates>@@ -115,12 +116,17 @@ <connect gate="G$1" pin="CS" pad="2"/> <connect gate="G$1" pin="GND" pad="3"/> <connect gate="G$1" pin="GATE" pad="4"/>- <connect gate="G$1" pin="Rosc" pad="8"/>+ <connect gate="G$1" pin="ROSC" pad="8"/> <connect gate="G$1" pin="LD" pad="7"/> <connect gate="G$1" pin="VDD" pad="6"/> <connect gate="G$1" pin="PWMD" pad="5"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="HG9910M" constant="no"/>+ <attribute name="MANUFACTURER" value="HGSEMI" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+11−14@@ -32,49 +32,49 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Input DC supply voltage. Operates from 8 V to 450 V DC (absolute max 470 V). Feeds the internal linear regulator that generates VDD."+ "description": "Input voltage supply, 8V to 450V DC. Absolute maximum 470V. Feeds the internal linear regulator that generates VDD." }, { "number": "2", "name": "CS", "type": "input",- "description": "Current-sense input. Senses LED string current through an external sense resistor; the internal comparator trips at V_CS(hi) ≈ 250 mV (225-275 mV) to terminate the GATE on-time. Absolute max −0.3 V to +15.8 V."+ "description": "Current sense input. Senses the LED string / MOSFET source current via an external sense resistor. Internal pull-in threshold is 250 mV typical (225-275 mV). Absolute maximum -0.3V to +15.8V." }, { "number": "3", "name": "GND", "type": "power_in",- "description": "Device ground reference for all internal circuitry and the return for CS, LD, PWMD, Rosc, and GATE signals."+ "description": "Device ground reference for all internal circuitry." }, { "number": "4", "name": "GATE", "type": "output",- "description": "Gate driver output for the external switching MOSFET. Swings from GND to VDD (~7.5 V), with typical rise/fall times of 30 ns into a 500 pF load. IOUT rated at ±10 mA characterization."+ "description": "Gate drive output for the external switching MOSFET. High output at VDD (7.5V nom), rise/fall time ~30 ns typ into 500 pF. Absolute maximum -0.3V to +15.8V." }, { "number": "5", "name": "PWMD", "type": "input",- "description": "Low-frequency PWM dimming input, also serves as chip Enable. Accepts a 0-100 % duty-cycle signal up to a few kHz. VIL ≤ 1.0 V, VIH ≥ 2.4 V. Has an internal ~100 kΩ pull-down to GND (50-150 kΩ). Tie high or leave floating with external pull-up to enable. Absolute max −0.3 V to +15.1 V."+ "description": "Low-frequency PWM dimming pin, also functions as enable input. Internal 100k\u03a9 (50-150k\u03a9) pull-down to GND. VIL max 1.0V, VIH min 2.4V. Accepts 0-100% duty cycle up to a few kHz." }, { "number": "6", "name": "VDD", "type": "power_out",- "description": "Internally regulated supply output, 7.5 V nominal (7.0-8.0 V). Can source up to 1 mA for external circuitry (VIN = 8-100 V). Requires an external storage/bypass capacitor. UVLO ≈ 6.7 V with 500 mV hysteresis. Absolute max 13.5 V when externally driven."+ "description": "Internally regulated supply voltage output, 7.5V nominal (7.0-8.0V). Can source up to 1mA for external circuitry. Requires an external storage capacitor to hold up the rail near AC input zero-crossings. Absolute maximum 13.5V." }, { "number": "7", "name": "LD", "type": "input",- "description": "Linear dimming input. External analog voltage (0-250 mV range) sets the current-sense comparator threshold, scaling the LED current from zero to its programmed maximum. Absolute max −0.3 V to +15.1 V."+ "description": "Linear dimming input. Adjusts the current-sense comparator threshold (voltage range 0 to 250 mV) to modulate LED current linearly. Absolute maximum -0.3V to +15.1V." }, { "number": "8",- "name": "Rosc",- "type": "passive",- "description": "Oscillator frequency-setting pin. An external resistor to GND programs the PWM switching frequency (e.g., Rosc = 1.00 MΩ → 25 kHz typ; Rosc = 226 kΩ → 100 kHz typ). Frequency programmable up to 300 kHz."+ "name": "ROSC",+ "type": "input",+ "description": "Oscillator programming pin. An external resistor from this pin to GND sets the PWM switching frequency (e.g. 1.00 M\u03a9 \u2192 ~25 kHz, 226 k\u03a9 \u2192 ~100 kHz, up to ~300 kHz)." } ], "provenance": {@@ -138,8 +138,5 @@ "docs/hg9910m-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }