← Commit history

Set visibility: public

Ray ·8a3035772a · ·parent c6cc103
1 file changed +10−7
page.json+10−7
@@ -38,7 +38,7 @@         "number": "2",         "name": "CS",         "type": "input",-        "description": "Current-sense input. Senses LED string current through an external sense resistor; the internal comparator trips at V_CS(hi) \u2248 250 mV (225-275 mV) to terminate the GATE on-time. Absolute max \u22120.3 V to +15.8 V."+        "description": "Current-sense input. Senses LED string current through an external sense resistor; the internal comparator trips at V_CS(hi) ≈ 250 mV (225-275 mV) to terminate the GATE on-time. Absolute max −0.3 V to +15.8 V."       },       {         "number": "3",@@ -50,31 +50,31 @@         "number": "4",         "name": "GATE",         "type": "output",-        "description": "Gate driver output for the external switching MOSFET. Swings from GND to VDD (~7.5 V), with typical rise/fall times of 30 ns into a 500 pF load. IOUT rated at \u00b110 mA characterization."+        "description": "Gate driver output for the external switching MOSFET. Swings from GND to VDD (~7.5 V), with typical rise/fall times of 30 ns into a 500 pF load. IOUT rated at ±10 mA characterization."       },       {         "number": "5",         "name": "PWMD",         "type": "input",-        "description": "Low-frequency PWM dimming input, also serves as chip Enable. Accepts a 0-100 % duty-cycle signal up to a few kHz. VIL \u2264 1.0 V, VIH \u2265 2.4 V. Has an internal ~100 k\u03a9 pull-down to GND (50-150 k\u03a9). Tie high or leave floating with external pull-up to enable. Absolute max \u22120.3 V to +15.1 V."+        "description": "Low-frequency PWM dimming input, also serves as chip Enable. Accepts a 0-100 % duty-cycle signal up to a few kHz. VIL ≤ 1.0 V, VIH ≥ 2.4 V. Has an internal ~100 kΩ pull-down to GND (50-150 kΩ). Tie high or leave floating with external pull-up to enable. Absolute max −0.3 V to +15.1 V."       },       {         "number": "6",         "name": "VDD",         "type": "power_out",-        "description": "Internally regulated supply output, 7.5 V nominal (7.0-8.0 V). Can source up to 1 mA for external circuitry (VIN = 8-100 V). Requires an external storage/bypass capacitor. UVLO \u2248 6.7 V with 500 mV hysteresis. Absolute max 13.5 V when externally driven."+        "description": "Internally regulated supply output, 7.5 V nominal (7.0-8.0 V). Can source up to 1 mA for external circuitry (VIN = 8-100 V). Requires an external storage/bypass capacitor. UVLO ≈ 6.7 V with 500 mV hysteresis. Absolute max 13.5 V when externally driven."       },       {         "number": "7",         "name": "LD",         "type": "input",-        "description": "Linear dimming input. External analog voltage (0-250 mV range) sets the current-sense comparator threshold, scaling the LED current from zero to its programmed maximum. Absolute max \u22120.3 V to +15.1 V."+        "description": "Linear dimming input. External analog voltage (0-250 mV range) sets the current-sense comparator threshold, scaling the LED current from zero to its programmed maximum. Absolute max −0.3 V to +15.1 V."       },       {         "number": "8",         "name": "Rosc",         "type": "passive",-        "description": "Oscillator frequency-setting pin. An external resistor to GND programs the PWM switching frequency (e.g., Rosc = 1.00 M\u03a9 \u2192 25 kHz typ; Rosc = 226 k\u03a9 \u2192 100 kHz typ). Frequency programmable up to 300 kHz."+        "description": "Oscillator frequency-setting pin. An external resistor to GND programs the PWM switching frequency (e.g., Rosc = 1.00 MΩ → 25 kHz typ; Rosc = 226 kΩ → 100 kHz typ). Frequency programmable up to 300 kHz."       }     ],     "provenance": {@@ -138,5 +138,8 @@     "docs/hg9910m-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file