main
Ray
Publish 0.1.1
4cb3e3d
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201
{
"slug": "hg9200bm",
"version": "0.1.1",
"type": "component",
"description": "HGSEMI Audio Interface ICs, SOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"hg9200bm"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"hg9200bm.kicad_sym",
"hg9200bm.kicad_mod",
"hg9200bm.glb",
"hg9200bm.step",
"hg9200bm.lbr",
"docs/hero.png",
"docs/hg9200bm-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"hg9200bm-etched.glb",
"hg9200bm-etched.step"
],
"visibility": "public",
"author": {
"name": "Ray"
},
"component": {
"mpn": "HG9200BM",
"manufacturer": "HGSEMI",
"package": "SOP-14",
"pin_count": 14,
"category": "Audio Interface ICs",
"parts": {
"symbol": "hg9200bm.kicad_sym",
"footprint": "hg9200bm.kicad_mod",
"model_3d": "hg9200bm-etched.glb",
"model_3d_plain": "hg9200bm.glb",
"model_3d_step": "hg9200bm-etched.step",
"model_3d_step_plain": "hg9200bm.step",
"lbr": "hg9200bm.lbr"
},
"pins": [
{
"number": "1",
"name": "CE",
"type": "input",
"description": "Chip enable, active low. CMOS input with internal pull-high. Drive low to enable oscillator and DTMF output; drive high to place the device in standby (I_STB ≤ 2 µA at 5 V)."
},
{
"number": "2",
"name": "X2",
"type": "output",
"description": "Oscillator output. Along with X1 forms the inverter/bias-resistor oscillator with on-chip load capacitors. Connect a standard 3.579545 MHz crystal between X1 and X2."
},
{
"number": "3",
"name": "X1",
"type": "input",
"description": "Oscillator input. Connect a standard 3.579545 MHz crystal or ceramic resonator between X1 and X2. Internal bias resistor (~10 MΩ) and load caps (~20 pF/10 pF) are integrated."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Negative supply / ground reference."
},
{
"number": "5",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Leave floating or tie to ground per board convention."
},
{
"number": "6",
"name": "D0",
"type": "input",
"description": "Parallel-mode data input bit 0 (LSB of the 4-bit digit code in Table 2). In serial mode this pin is pulled high internally and should be left floating; in parallel mode it must not be floated."
},
{
"number": "7",
"name": "D1",
"type": "input",
"description": "Parallel-mode data input bit 1. Pull-high internal resistor when in serial mode; drive as parallel data input when S/P=H."
},
{
"number": "8",
"name": "D2",
"type": "input",
"description": "Parallel-mode data input bit 2. Pull-high internal resistor when in serial mode; drive as parallel data input when S/P=H."
},
{
"number": "9",
"name": "D3",
"type": "input",
"description": "Parallel-mode data input bit 3 (MSB of the 4-bit parallel code). Pull-high internal resistor when in serial mode; drive as parallel data input when S/P=H."
},
{
"number": "10",
"name": "S/P",
"type": "input",
"description": "Operation-mode select. CMOS input: S/P = H selects parallel mode (D0-D3 drive the tone code); S/P = L selects serial mode (DATA/CLK stream a 5-bit code)."
},
{
"number": "11",
"name": "CLK",
"type": "input",
"description": "Serial-mode synchronous clock input. In parallel mode this pin is pulled high internally and can be left floating; in serial mode it clocks in 5-bit codes on the falling edge (100 kHz typ, 500 kHz max)."
},
{
"number": "12",
"name": "DATA",
"type": "input",
"description": "Serial-mode data input. In parallel mode this pin is pulled high internally and can be left floating; in serial mode it is latched on the falling edge of CLK, D0 (LSB) first."
},
{
"number": "13",
"name": "DTMF",
"type": "output",
"description": "DTMF analog output. CMOS output providing the selected single/dual tone (V_TAC ≈ 0.15 Vrms into R_L=5 kΩ, DC level ≈ 0.45-0.75 × VDD). Requires R_L ≥ 5 kΩ."
},
{
"number": "14",
"name": "VDD",
"type": "power_in",
"description": "Positive supply, 2.0-5.5 V for normal operation. I_DD ≈ 240 µA at 2.5 V and 950 µA at 5.0 V with CE=VSS and no load."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T18:59:47Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "hg9200bm.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
8.7,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "hg9200bm-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
8.7,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "5ad0096bb476e947d38330cd05a4b4fef0b85fd27663de3d1aec2dfb74ff2f5a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"org": "adom"
}