HG811RM4

{
  "slug": "hg811rm4",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI Supervisor And Reset ICs, SOT-143-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "hg811rm4",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hg811rm4.kicad_sym",
    "hg811rm4.kicad_mod",
    "hg811rm4.glb",
    "hg811rm4.step",
    "hg811rm4.lbr",
    "docs/hero.png",
    "docs/hg811rm4-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hg811rm4-hero.glb",
    "hg811rm4-hero.overlay.json",
    "hg811rm4-etched.glb"
  ],
  "component": {
    "mpn": "HG811RM4",
    "manufacturer": "HGSEMI",
    "package": "SOT-143-4",
    "pin_count": 4,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757917815934464000",
    "parts": {
      "symbol": "hg811rm4.kicad_sym",
      "footprint": "hg811rm4.kicad_mod",
      "model_3d": "hg811rm4-hero.glb",
      "model_3d_plain": "hg811rm4-etched.glb",
      "model_3d_step": "hg811rm4-etched.step",
      "model_3d_step_plain": "hg811rm4.step",
      "lbr": "hg811rm4.lbr"
    },
    "distributor_links": {
      "lcsc": "C2835193"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T18:36:23Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply negative terminal (ground) of the HG811x reset IC."
      },
      {
        "number": "2",
        "name": "VRESET",
        "type": "output",
        "description": "Reset output that goes low when VCC falls below Vth or MR is low and goes high Trp (500 ms typical) after VCC returns above Vth or MR returns high; the absolute voltage range is -0.3 V to VCC+0.3 V."
      },
      {
        "number": "3",
        "name": "MR",
        "type": "input",
        "description": "Active-low enable control input (VMRH minimum 0.7×VCC, VMRL maximum 0.2×VCC, minimum low pulse width 10 µs)."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input with an operating range of 1.0 V to 6.0 V and an absolute maximum of 6.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The overbar on the MR (enable) name is lost in the extracted text; the active-low behavior is taken ; The VRESET output stage type (push-pull vs. open-drain) is not stated in the text, so it is classed ; The pinout is given once for the SOT-143 package and applies to the HG811RM4/TR ordering entry (SOT-"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0226,
        "at": "2026-10-20T18:34:29"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757917815934464000",
        "pages": 7,
        "sha256": "a75fd3d5b03be350",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 4,
        "described": 4,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hg811rm4.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.3,
          2.9,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b35b433c0dc71ac416a9c731e744d2e0610f82ebe97275830f0e17cdcbe44512",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hg811rm4-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.3,
          2.9,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fce72add6fb91b7f37d8d0105339fa7cec50e0f3c87aad478f9c6a2c4c5ccf81",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}