component
HG7500BN
Public Made by Adomby adom
HGSEMI DC-DC Converters, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HG7500BN
HGSEMI · DC-DC Converters · DIP-16
HG7500BN from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AMPERR1+ | input | Non-inverting input of error amplifier 1 (管脚描述: 误差放大器 1+); the datasheet gives no separate voltage limit for this pin. |
| 2 | AMPERR1- | input | Inverting input of error amplifier 1 (管脚描述: 误差放大器 1-); the datasheet gives no separate voltage limit for this pin. |
| 3 | INCPWM | input | PWM comparator input (管脚描述: PWM 比较端); the datasheet gives no separate voltage limit for this pin. |
| 4 | CONTDE | input | Dead-time control input (管脚描述: 死区时间控制); dead-time threshold behaviour is given in the electrical table (terminal 4 threshold voltage 3.3 V typical at 0% duty cycle, 4.2 V typical at maximum duty cycle). |
| 5 | COSC | passive | Oscillator timing capacitor connection (管脚描述: 振荡电容); the oscillator frequency is set with CT and RT, e.g. CT=0.01uF and RT=12k gives 10 kHz typical. |
| 6 | ROSC | passive | Oscillator timing resistor connection (管脚描述: 振荡电阻); the oscillator frequency is set together with COSC, e.g. RT=12k with CT=0.01uF gives 10 kHz typical. |
| 7 | GND | power_in | Ground reference for the controller (管脚描述: 地). |
| 8 | OUT1 | output | Output 1 of the output transistor, which can be configured by CONOUT for push-pull or single-ended operation; output current is rated at Io = 500 mA (absolute maximum 600 mA). |
| 9 | GNDOUT1 | power_in | Output ground for output 1 (管脚描述: 输出地 1). |
| 10 | GNDOUT2 | power_in | Output ground for output 2 (管脚描述: 输出地 2). |
| 11 | OUT2 | output | Output 2 of the output transistor, which can be configured by CONOUT for push-pull or single-ended operation; output current is rated at Io = 500 mA (absolute maximum 600 mA). |
| 12 | VCC | power_in | Power supply pin; absolute maximum supply voltage is 40 V, and quiescent current is 6 mA to 7 mA at VCC = 15 V. |
| 13 | CONOUT | input | Output control pin (管脚描述: 输出控制端) that selects push-pull or single-ended output operation; the datasheet gives control current ICONT of 3.5 mA at VIN = VREF. |
| 14 | VREF | power_out | 5 V reference voltage output (管脚描述: 基准电源), 4.95 V to 5.05 V at VOUT = 1 mA, with short-circuit current of 25 mA to 50 mA at VREF = 0 V. |
| 15 | AMPERR2- | input | Inverting input of error amplifier 2 (管脚描述: 误差放大器 2-); the datasheet gives no separate voltage limit for this pin. |
| 16 | AMPERR2+ | input | Non-inverting input of error amplifier 2 (管脚描述: 误差放大器 2+); the datasheet gives no separate voltage limit for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 40 | V | 3 | |||
| Output voltage | VO | 35 | V | 3 | |||
| Output current | IO | 600 | mA | 3 | |||
| Power dissipation | PD | 1000 | mW | derate 9.2 mW per °C above 25°C (note 2) | 3 | ||
| Operating temperature | TOPR | -40 | 85 | °C | 3 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 3 | ||
| Lead temperature (soldering) | TLEAD | 260 | °C | soldering 10 s | 3 | ||
| Quiescent supply current | ICCQ | 6 | 7 | mA | VCC=15V | 4 | |
| Quiescent supply current | ICCQ | 6.3 | 7.3 | mA | VCC=35V | 4 | |
| Input bias current (dead-time section) | IBIAS | -2 | -10 | uA | VIN=0~5.25V | 4 | |
| Maximum duty factor (each output) | D(MAX) | 45 | 47 | % | VT4=0 | 4 | |
| Terminal 4 threshold voltage | VTH | 3 | 3.3 | V | 0 duty cycle | 4 | |
| Terminal 3 threshold voltage | VTH | 3.9 | 4.2 | V | 0 duty cycle | 4 | |
| Error amplifier input offset voltage | Vio | 5 | 8 | mV | VT3=2.5V | 4 | |
| Error amplifier input offset current | Iio | 15 | 250 | nA | VT3=2.5V | 4 | |
| Error amplifier input bias current | Iib | 0.15 | 1 | uA | VT3=2.5V | 4 | |
| Error amplifier voltage gain | AV | 70 | 95 | dB | VOUT=3V; VOUT=0.5~3.5V | 4 | |
| Common-mode input voltage range | CMRR | -0.3 | dB | VCC=35V | 4 | ||
| Output control terminal input sink current | Isink | 0.3 | 0.7 | mA | Vid=-15mV~-5V, VT3=0.7V | 4 | |
| Collector open-circuit current | ICEO | 2 | 100 | uA | VCE=35V, VCC=35V | 4 | |
| Emitter open-circuit current | IEBO | 2 | -150 | uA | VCC=VC=35V, VE=0V | 4 | |
| Fall time | Tf | 25 | 100 | ns | common emitter | 4 | |
| Fall time | Tf | 40 | 100 | ns | common collector | 4 | |
| Reference voltage | VREF | 4.95 | 5 | 5.05 | V | VOUT=1mA | 5 |
| Reference voltage drift vs. supply | VOUT/VCC | 3.6 | 25 | mV | VCC=7~35V | 5 | |
| Reference voltage drift vs. load current | VOUT/IOUT | 1.5 | 15 | mV | IOUT=1~10mA | 5 | |
| Reference short-circuit current | Isc | 25 | 35 | 50 | mA | Vref=0V | 5 |
| Reference voltage temperature drift | VREF | 0.2 | 1 | % | TA=full temperature range | 5 | |
| Oscillator frequency voltage drift | fosc | 0.2 | 1 | % | VCC=7~35V | 5 | |
| Output control terminal current | ICONT | 3.5 | mA | VIN=VREF | 4 | ||
| Error amplifier input sink current (Vid=15mV~5V) | Isink | -2 | mA | Vid=15mV~5V, VT3=3.5V | 4 |
CAD (KiCad official)
- Symbol:
HG7500BN - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files:
hg7500bn-etched.step/hg7500bn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg7500bn.step/hg7500bn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (13 pp, sha256
2f6a03bc03ff5303, retrieved 2026-10-14, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG7500BN
**HGSEMI** · DC-DC Converters · DIP-16
HG7500BN from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AMPERR1+ | input | Non-inverting input of error amplifier 1 (管脚描述: 误差放大器 1+); the datasheet gives no separate voltage limit for this pin. |
| 2 | AMPERR1- | input | Inverting input of error amplifier 1 (管脚描述: 误差放大器 1-); the datasheet gives no separate voltage limit for this pin. |
| 3 | INCPWM | input | PWM comparator input (管脚描述: PWM 比较端); the datasheet gives no separate voltage limit for this pin. |
| 4 | CONTDE | input | Dead-time control input (管脚描述: 死区时间控制); dead-time threshold behaviour is given in the electrical table (terminal 4 threshold voltage 3.3 V typical at 0% duty cycle, 4.2 V typical at maximum duty cycle). |
| 5 | COSC | passive | Oscillator timing capacitor connection (管脚描述: 振荡电容); the oscillator frequency is set with CT and RT, e.g. CT=0.01uF and RT=12k gives 10 kHz typical. |
| 6 | ROSC | passive | Oscillator timing resistor connection (管脚描述: 振荡电阻); the oscillator frequency is set together with COSC, e.g. RT=12k with CT=0.01uF gives 10 kHz typical. |
| 7 | GND | power_in | Ground reference for the controller (管脚描述: 地). |
| 8 | OUT1 | output | Output 1 of the output transistor, which can be configured by CONOUT for push-pull or single-ended operation; output current is rated at Io = 500 mA (absolute maximum 600 mA). |
| 9 | GNDOUT1 | power_in | Output ground for output 1 (管脚描述: 输出地 1). |
| 10 | GNDOUT2 | power_in | Output ground for output 2 (管脚描述: 输出地 2). |
| 11 | OUT2 | output | Output 2 of the output transistor, which can be configured by CONOUT for push-pull or single-ended operation; output current is rated at Io = 500 mA (absolute maximum 600 mA). |
| 12 | VCC | power_in | Power supply pin; absolute maximum supply voltage is 40 V, and quiescent current is 6 mA to 7 mA at VCC = 15 V. |
| 13 | CONOUT | input | Output control pin (管脚描述: 输出控制端) that selects push-pull or single-ended output operation; the datasheet gives control current ICONT of 3.5 mA at VIN = VREF. |
| 14 | VREF | power_out | 5 V reference voltage output (管脚描述: 基准电源), 4.95 V to 5.05 V at VOUT = 1 mA, with short-circuit current of 25 mA to 50 mA at VREF = 0 V. |
| 15 | AMPERR2- | input | Inverting input of error amplifier 2 (管脚描述: 误差放大器 2-); the datasheet gives no separate voltage limit for this pin. |
| 16 | AMPERR2+ | input | Non-inverting input of error amplifier 2 (管脚描述: 误差放大器 2+); the datasheet gives no separate voltage limit for this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | | | 40 | V | | 3 |
| Output voltage | VO | | | 35 | V | | 3 |
| Output current | IO | | | 600 | mA | | 3 |
| Power dissipation | PD | | | 1000 | mW | derate 9.2 mW per °C above 25°C (note 2) | 3 |
| Operating temperature | TOPR | -40 | | 85 | °C | | 3 |
| Storage temperature | TSTG | -55 | | 150 | °C | | 3 |
| Lead temperature (soldering) | TLEAD | | | 260 | °C | soldering 10 s | 3 |
| Quiescent supply current | ICCQ | | 6 | 7 | mA | VCC=15V | 4 |
| Quiescent supply current | ICCQ | | 6.3 | 7.3 | mA | VCC=35V | 4 |
| Input bias current (dead-time section) | IBIAS | | -2 | -10 | uA | VIN=0~5.25V | 4 |
| Maximum duty factor (each output) | D(MAX) | | 45 | 47 | % | VT4=0 | 4 |
| Terminal 4 threshold voltage | VTH | | 3 | 3.3 | V | 0 duty cycle | 4 |
| Terminal 3 threshold voltage | VTH | | 3.9 | 4.2 | V | 0 duty cycle | 4 |
| Error amplifier input offset voltage | Vio | | 5 | 8 | mV | VT3=2.5V | 4 |
| Error amplifier input offset current | Iio | | 15 | 250 | nA | VT3=2.5V | 4 |
| Error amplifier input bias current | Iib | | 0.15 | 1 | uA | VT3=2.5V | 4 |
| Error amplifier voltage gain | AV | 70 | 95 | | dB | VOUT=3V; VOUT=0.5~3.5V | 4 |
| Common-mode input voltage range | CMRR | -0.3 | | | dB | VCC=35V | 4 |
| Output control terminal input sink current | Isink | | 0.3 | 0.7 | mA | Vid=-15mV~-5V, VT3=0.7V | 4 |
| Collector open-circuit current | ICEO | | 2 | 100 | uA | VCE=35V, VCC=35V | 4 |
| Emitter open-circuit current | IEBO | | 2 | -150 | uA | VCC=VC=35V, VE=0V | 4 |
| Fall time | Tf | | 25 | 100 | ns | common emitter | 4 |
| Fall time | Tf | | 40 | 100 | ns | common collector | 4 |
| Reference voltage | VREF | 4.95 | 5 | 5.05 | V | VOUT=1mA | 5 |
| Reference voltage drift vs. supply | VOUT/VCC | | 3.6 | 25 | mV | VCC=7~35V | 5 |
| Reference voltage drift vs. load current | VOUT/IOUT | | 1.5 | 15 | mV | IOUT=1~10mA | 5 |
| Reference short-circuit current | Isc | 25 | 35 | 50 | mA | Vref=0V | 5 |
| Reference voltage temperature drift | VREF | | 0.2 | 1 | % | TA=full temperature range | 5 |
| Oscillator frequency voltage drift | fosc | | 0.2 | 1 | % | VCC=7~35V | 5 |
| Output control terminal current | ICONT | | 3.5 | | mA | VIN=VREF | 4 |
| Error amplifier input sink current (Vid=15mV~5V) | Isink | | -2 | | mA | Vid=15mV~5V, VT3=3.5V | 4 |
## CAD (KiCad official)
- Symbol: `HG7500BN`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files: `hg7500bn-etched.step` / `hg7500bn-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg7500bn.step` / `hg7500bn.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758163168965070848) (13 pp, sha256 `2f6a03bc03ff5303`, retrieved 2026-10-14, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg7500bn-datasheet.pdf)