main
Ray
Publish 0.1.0
9f0c179
HG7333MK-1
HGSEMI · Linear Voltage Regulators (LDO) · SOT-89
HG7333MK-1 from HGSEMI, in a SOT-89. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the regulator (地). |
| 2 | VIN | power_in | Power input pin; the datasheet limits VIN to 0 to +36 V absolute maximum and +2.5 to +36 V recommended. |
| 3 | VOUT | power_out | Output pin that must have a capacitor of more than 1 uF connected to ground; output current is rated up to 300 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-89 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (electrical table, VIN row) | VIN | 36 | V | 4 | |||
| Output voltage accuracy, VOUT 3.3V | VOUT | -2 | 2 | % | TA=+25℃ | 4 | |
| Output voltage accuracy, VOUT 3.3V | VOUT | -3 | 3 | % | -40℃≤TA≤+85℃ | 4 | |
| Dropout voltage, VOUT=3.3V | VDROP | 1000 | 1300 | mV | IOUT=300mA, VOUT=3.3V | 4 | |
| Current limit | I_LMT | 300 | 450 | mA | VIN=VOUT+1V | 4 | |
| Load regulation | LoadReg | 40 | mV | 1mA≤Iout≤300mA, VIN=Vout+1V | 4 | ||
| Quiescent current | IQ | 3 | 4 | uA | No load (IOUT=0mA) | 4 | |
| Input voltage regulation (line regulation) | 0.2 | %/V | Vo+1V≤VIN≤36V, IOUT=1mA | 4 | |||
| Output current | IOUT | 300 | mA | VIN=VOUT+2V | 4 | ||
| Short-circuit current limit | ISHORT | 100 | mA | VOUT=0V | 4 | ||
| Power supply rejection ratio | PSRR | 60 | dB | VIN=VOUT+1V, IOUT=20mA, f=1KHz | 4 | ||
| Output noise voltage | eN | 100 | uVrms | VIN=VOUT+1V, IOUT=1mA, f=10Hz~100KHz, VOUT=3V, COUT=1uF | 4 | ||
| Output discharge resistance | RLOW | 70 | Ω | VOUT=4V, Ven=0V | 4 | ||
| Output voltage temperature coefficient | 100 | ppm/℃ | IOUT=10mA, -40℃<Ta<85℃ | 4 | |||
| Input voltage (absolute maximum) | Vin | 0 | 36 | V | 3 | ||
| Output voltage rating range (absolute maximum table) | Vout | 1.8 | 5 | V | 3 | ||
| Storage temperature | TSTG | -45 | 140 | ℃ | 3 | ||
| Operating temperature (absolute maximum table) | TWK | -40 | 85 | ℃ | 3 | ||
| ESD human body model | ESDHBM | 4000 | V | HBM, per EIA/JESD22-A114 | 3 | ||
| ESD charged device model | CDM | 1500 | V | CDM, per JESD22-C101 | 3 | ||
| Latch-up maximum current | Latch up | 200 | mA | per JEDEC78 | 3 | ||
| Lead temperature (soldering) | TLEAD | 260 | °C | Soldering, 10s | 3 | ||
| Input voltage (recommended operating) | VIN | 2.5 | 36 | V | 3 | ||
| Output current (recommended operating) | IOUT | 0 | 300 | mA | 3 | ||
| Operating temperature (recommended operating) | TA | -40 | 85 | ℃ | 3 | ||
| Input capacitor (polarized) | CIN | 1 | 10 | uF | Input-side polarized capacitor | 3 | |
| Output capacitor (polarized) | COUT | 1 | 10 | uF | Output-side polarized capacitor | 3 | |
| Input/output capacitor ESR | ESR | 5 | 100 | mΩ | 3 | ||
| Thermal resistance junction-to-ambient, SOT-89-3 | θJA | 135 | ℃/W | Still air, no heatsink | 4 | ||
| Power dissipation, SOT-89-3 | PD | 0.5 | W | Ta=25℃ | 4 |
CAD (KiCad official)
- Symbol:
HG7333MK-1 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89 (KiCad packages3D, STEP)
- 3D model files:
hg7333mk-1-etched.step/hg7333mk-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg7333mk-1.step/hg7333mk-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (12 pp, sha256
5fbddef2c644c0cd, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG7333MK-1
**HGSEMI** · Linear Voltage Regulators (LDO) · SOT-89
HG7333MK-1 from HGSEMI, in a SOT-89. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the regulator (地). |
| 2 | VIN | power_in | Power input pin; the datasheet limits VIN to 0 to +36 V absolute maximum and +2.5 to +36 V recommended. |
| 3 | VOUT | power_out | Output pin that must have a capacitor of more than 1 uF connected to ground; output current is rated up to 300 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-89 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (electrical table, VIN row) | VIN | | | 36 | V | | 4 |
| Output voltage accuracy, VOUT 3.3V | VOUT | -2 | | 2 | % | TA=+25℃ | 4 |
| Output voltage accuracy, VOUT 3.3V | VOUT | -3 | | 3 | % | -40℃≤TA≤+85℃ | 4 |
| Dropout voltage, VOUT=3.3V | VDROP | | 1000 | 1300 | mV | IOUT=300mA, VOUT=3.3V | 4 |
| Current limit | I_LMT | 300 | 450 | | mA | VIN=VOUT+1V | 4 |
| Load regulation | LoadReg | | | 40 | mV | 1mA≤Iout≤300mA, VIN=Vout+1V | 4 |
| Quiescent current | IQ | | 3 | 4 | uA | No load (IOUT=0mA) | 4 |
| Input voltage regulation (line regulation) | | | | 0.2 | %/V | Vo+1V≤VIN≤36V, IOUT=1mA | 4 |
| Output current | IOUT | | 300 | | mA | VIN=VOUT+2V | 4 |
| Short-circuit current limit | ISHORT | | 100 | | mA | VOUT=0V | 4 |
| Power supply rejection ratio | PSRR | | 60 | | dB | VIN=VOUT+1V, IOUT=20mA, f=1KHz | 4 |
| Output noise voltage | eN | | 100 | | uVrms | VIN=VOUT+1V, IOUT=1mA, f=10Hz~100KHz, VOUT=3V, COUT=1uF | 4 |
| Output discharge resistance | RLOW | | 70 | | Ω | VOUT=4V, Ven=0V | 4 |
| Output voltage temperature coefficient | | | 100 | | ppm/℃ | IOUT=10mA, -40℃<Ta<85℃ | 4 |
| Input voltage (absolute maximum) | Vin | 0 | | 36 | V | | 3 |
| Output voltage rating range (absolute maximum table) | Vout | 1.8 | | 5 | V | | 3 |
| Storage temperature | TSTG | -45 | | 140 | ℃ | | 3 |
| Operating temperature (absolute maximum table) | TWK | -40 | | 85 | ℃ | | 3 |
| ESD human body model | ESDHBM | | | 4000 | V | HBM, per EIA/JESD22-A114 | 3 |
| ESD charged device model | CDM | | | 1500 | V | CDM, per JESD22-C101 | 3 |
| Latch-up maximum current | Latch up | | | 200 | mA | per JEDEC78 | 3 |
| Lead temperature (soldering) | TLEAD | | | 260 | °C | Soldering, 10s | 3 |
| Input voltage (recommended operating) | VIN | 2.5 | | 36 | V | | 3 |
| Output current (recommended operating) | IOUT | 0 | | 300 | mA | | 3 |
| Operating temperature (recommended operating) | TA | -40 | | 85 | ℃ | | 3 |
| Input capacitor (polarized) | CIN | 1 | | 10 | uF | Input-side polarized capacitor | 3 |
| Output capacitor (polarized) | COUT | 1 | | 10 | uF | Output-side polarized capacitor | 3 |
| Input/output capacitor ESR | ESR | 5 | | 100 | mΩ | | 3 |
| Thermal resistance junction-to-ambient, SOT-89-3 | θJA | | | 135 | ℃/W | Still air, no heatsink | 4 |
| Power dissipation, SOT-89-3 | PD | | | 0.5 | W | Ta=25℃ | 4 |
## CAD (KiCad official)
- Symbol: `HG7333MK-1`
- Footprint: `Package_TO_SOT_SMD:SOT-89-3`
- 3D model: SOT-89 (KiCad packages3D, STEP)
- 3D model files: `hg7333mk-1-etched.step` / `hg7333mk-1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg7333mk-1.step` / `hg7333mk-1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg7333mk-1-datasheet.pdf) (12 pp, sha256 `5fbddef2c644c0cd`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg7333mk-1-datasheet.pdf)