main
Ray
hg4054m5: laser-etched CAD + chip hero (factory 2.0.0 backfill)
1fbef3f
HG4054M5
HGSEMI · Battery Management · SOT-23-5
HG4054M5 from HGSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status output. Pulled low by an internal N-channel MOSFET during charging; released (high-Z) at end-of-charge or when the part detects an undervoltage lockout condition. Absolute max voltage 10 V. |
| 2 | GND | power_in | Device ground return. |
| 3 | BAT | power_out | Charge current output to the Li-Ion cell. Regulates the final float voltage to 4.2 V via an internal precision resistor divider (divider disconnected in shutdown). Absolute max 7 V; supports continuous BAT short-circuit. |
| 4 | VCC | power_in | Positive input supply, 4.25 V-6.5 V, bypass with at least 1 µF to GND. When VCC drops within 30 mV of BAT the part enters shutdown and IBAT falls below 2 µA. |
| 5 | PROG | bidirectional | Charge-current program, monitor and shutdown pin. A 1% resistor RPROG to GND sets ICHG = 1000/RPROG (A). In constant-current mode the pin sits at 1 V and can be used to measure charge current (IBAT = VPROG/RPROG × 1000). Floating the pin lets an internal ~2.5 µA pull-up raise it past the 1.22 V shutdown threshold, driving the charger into shutdown (ICC ≈ 45 µA). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
HG4054M5/TR
CAD (KiCad official)
- Symbol:
HG4054M5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
hg4054m5-etched.step/hg4054m5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg4054m5.step/hg4054m5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (10 pp, sha256
2ff1d755ad59a0ed, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG4054M5
**HGSEMI** · Battery Management · SOT-23-5
HG4054M5 from HGSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status output. Pulled low by an internal N-channel MOSFET during charging; released (high-Z) at end-of-charge or when the part detects an undervoltage lockout condition. Absolute max voltage 10 V. |
| 2 | GND | power_in | Device ground return. |
| 3 | BAT | power_out | Charge current output to the Li-Ion cell. Regulates the final float voltage to 4.2 V via an internal precision resistor divider (divider disconnected in shutdown). Absolute max 7 V; supports continuous BAT short-circuit. |
| 4 | VCC | power_in | Positive input supply, 4.25 V-6.5 V, bypass with at least 1 µF to GND. When VCC drops within 30 mV of BAT the part enters shutdown and IBAT falls below 2 µA. |
| 5 | PROG | bidirectional | Charge-current program, monitor and shutdown pin. A 1% resistor RPROG to GND sets ICHG = 1000/RPROG (A). In constant-current mode the pin sits at 1 V and can be used to measure charge current (IBAT = VPROG/RPROG × 1000). Floating the pin lets an internal ~2.5 µA pull-up raise it past the 1.22 V shutdown threshold, driving the charger into shutdown (ICC ≈ 45 µA). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `HG4054M5/TR`
## CAD (KiCad official)
- Symbol: `HG4054M5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `hg4054m5-etched.step` / `hg4054m5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg4054m5.step` / `hg4054m5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg4054m5-datasheet.pdf) (10 pp, sha256 `2ff1d755ad59a0ed`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg4054m5-datasheet.pdf)