main
History Download
Ray Publish 0.1.0 e15101b

HG3485EIM

HGSEMI · RS-485 / RS-422 ICs · SOP-8

HG3485EIM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: with RE low, RO is high when A-B ≥ 200 mV and low when A-B ≤ -200 mV; RO is high-Z when RE is high.
2 RE input Active-low receiver output enable: RE low enables RO, RE high disables the receiver (RO high-Z), and RE high with DE low puts the device into low-power shutdown.
3 DE input Driver output enable: DE high enables the driver outputs, DE low puts them in high-Z, and RE high with DE low puts the device into low-power shutdown.
4 DI input Driver input: when DE is high, a low on DI drives A low and B high, and a high on DI drives A high and B low.
5 GND power_in Ground reference for the device; all voltages are referenced to this pin.
6 A bidirectional Non-inverting receiver input and non-inverting driver output on the RS-485 bus.
7 B bidirectional Inverting receiver input and inverting driver output on the RS-485 bus; bus-side input voltage limited to -7 V to 13 V.
8 VCC power_in Supply pin for the 3.3 V device, specified for an operating range of 3.0 V to 3.6 V (absolute maximum +7 V).

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 7 V 3
Control port voltage RE, DE, DI -0.3 7 V 3
Bus input voltage A, B -7 13 V 3
Receiver output voltage RO -0.3 7 V 3
Operating temperature range -40 85 ℃ 3
Storage operating temperature range -60 150 ℃ 3
Soldering temperature, 10 s 260 ℃ 10 s 3
Continuous power dissipation, SOP8 400 mW SOP8 3
Operating supply voltage VCC 3 3.6 V 2
Differential driver output voltage VOD2 1.5 V Fig. 2, RL = 54 Ω 4
Differential driver output voltage VOD2 2 V Fig. 2, RL = 100 Ω 4
Change in magnitude of differential output voltage ΔVOD 0.2 V Fig. 2, RL = 54 Ω 4
Common-mode output voltage VOC 3 V Fig. 2, RL = 54 Ω 4
Change in magnitude of common-mode output voltage ΔVOC 0.2 V Fig. 2, RL = 54 Ω 4
High-level input voltage VIH 2 V DE, DI, RE 4
Low-level input voltage VIL 0.8 V DE, DI, RE 4
Logic input current IIN1 -2 2 uA DE, DI, RE 4
Driver output short-circuit current, short to high IOSD1 250 mA short to 0V~12V 4
Driver output short-circuit current, short to low IOSD2 -250 mA short to -7V~0V 4
Receiver input current (A, B) IIN2 1 mA DE = 0 V, VCC=0 or 3.3V, VIN = 12 V 5
Receiver input current (A, B) IIN2 -0.8 mA DE = 0 V, VCC=0 or 3.3V, VIN = -7 V 5
Positive input threshold voltage VIT+ 200 mV -7V≦VCM≦12V 5
Negative input threshold voltage VIT- -200 mV -7V≦VCM≦12V 5
Input hysteresis voltage Vhys 10 30 mV -7V≦VCM≦12V 5
Low-level output voltage VOL 0.4 V IOUT = +2.5mA, VID = -200 mV 5
Three-state input leakage current IOZR -1 1 uA 0.4 V < VO < 2.4 V 5
Receiver input resistance RIN 12 kΩ -7V≦VCM≦12V 5
Receiver short-circuit current IOSR -8 60 mA 0 V≤VO≤VCC 5
Supply current, receiver enabled and driver disabled ICC1 520 800 uA RE =0V, DE = 0 V 5
Supply current, receiver and driver enabled ICC2 540 700 uA RE =VCC, DE=VCC 5
Shutdown current ISHDN 0.5 30 uA RE =VCC, DE=0V 5
Driver differential output delay tDD 10 35 ns RDIFF = 60 Ω, CL1=CL2=100pF (Fig. 3 & 4) 5
Driver differential transition time tTD 12 25 ns 5
Driver propagation delay, low to high tPLH 8 35 ns RDIFF = 27 Ω (Fig. 3 & 4) 5
Driver propagation delay, high to low tPHL 8 35 ns 5
Driver propagation delay skew tPDS 1 8 ns 5
Driver enable to output high tPZH 20 90 ns RL = 110Ω (Fig. 5, 6) 6
Driver enable to output low tPZL 20 90 ns 6
Driver input low to disable tPLZ 20 80 ns RL = 110Ω (Fig. 5, 6) 6
Driver input high to disable tPHZ 20 80 ns 6
Driver enable to output high in shutdown tDSH 500 900 ns RL = 110Ω (Fig. 5, 6) 6
Driver enable to output low in shutdown tDSL 500 900 ns RL = 110Ω (Fig. 5, 6) 6
Receiver propagation delay, input to output low to high tRPLH 80 150 ns CL=15pF, Fig. 7 & 8 6
Receiver propagation delay, input to output high to low tRPHL 80 150 ns 6
Receiver propagation delay skew tRPDS 7 10 ns 6
Receiver enable to output low tRPZL 20 50 ns CL=15pF 6
Receiver enable to output high tRPZH 20 50 ns CL=15pF 6
Receiver output low to disable tPRLZ 20 45 ns CL=15pF 6
Receiver output high to disable tPRHZ 20 45 ns CL=15pF 6
Receiver enable to output high in shutdown tRPSH 200 1400 ns CL=15pF 6
Receiver enable to output low in shutdown tRPSL 200 1400 ns CL=15pF 6
Time to enter shutdown tSHDN 80 300 ns NOTE2 6

CAD (KiCad official)

  • Symbol: HG3485EIM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hg3485eim-etched.step / hg3485eim-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hg3485eim.step / hg3485eim.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (16 pp, sha256 524f10135b5fa9c2, retrieved 2026-10-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF