main
Ray
Publish 0.1.1
f6ae7c7
HG3232AECN
HGSEMI · RS232 ICs · DIP-16
HG3232AECN from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge pump capacitor; 0.1 µF at VCC=3.3 V or 0.047 µF at VCC=5 V per the recommended capacitor table. |
| 2 | V+ | power_out | Positive voltage generated by the charge pump; absolute maximum 7 V, and V+ minus V- must not exceed 13 V. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge pump capacitor. |
| 4 | C2+ | passive | Positive terminal of the inverting charge pump capacitor; 0.1 µF at 3.3 V or 0.33 µF at 5 V per the recommended capacitor table. |
| 5 | C2- | passive | Negative terminal of the inverting charge pump capacitor. |
| 6 | V- | power_out | Negative voltage generated by the charge pump; absolute maximum -7 V, and V+ minus V- must not exceed 13 V. |
| 7 | DOUT2 | output | RS-232 driver output, typically ±5 V at RL=3 kΩ, with absolute limits of -13.2 V to 13.2 V and short-circuit protection to ground. |
| 8 | RIN2 | input | RS-232 receiver input with an input voltage range of -25 V to 25 V and typical input impedance 5 kΩ. |
| 9 | ROUT2 | output | TTL/CMOS receiver output; absolute range -0.3 V to VCC+0.3 V, with VOH of VCC-0.2 V typical at IOH=-1 mA. |
| 10 | DIN2 | input | TTL/CMOS driver input; VIL maximum 0.8 V, VIH minimum 2.0 V at VCC=3.3 V or 2.4 V at VCC=5 V, absolute range -0.3 V to +6 V. |
| 11 | DIN1 | input | TTL/CMOS driver input; VIL maximum 0.8 V, VIH minimum 2.0 V at VCC=3.3 V or 2.4 V at VCC=5 V, absolute range -0.3 V to +6 V. |
| 12 | ROUT1 | output | TTL/CMOS receiver output; absolute range -0.3 V to VCC+0.3 V, with VOH of VCC-0.2 V typical at IOH=-1 mA. |
| 13 | RIN1 | input | RS-232 receiver input with an input voltage range of -25 V to 25 V and typical input impedance 5 kΩ. |
| 14 | DOUT1 | output | RS-232 driver output, typically ±5 V at RL=3 kΩ, with absolute limits of -13.2 V to 13.2 V and short-circuit protection to ground. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage of +3.0 V to +5.5 V; absolute maximum 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 6 | V | 3 | |||
| Charge pump positive output voltage (note 1) | V+ | -0.3 | 7 | V | 3 | ||
| Charge pump negative output voltage (note 1) | V- | -7 | -0.3 | V | 3 | ||
| Driver output voltage between V+ and V- (note 1) | V+ ~ V- | 13 | V | 3 | |||
| Driver input voltage | -0.3 | 6 | V | 3 | |||
| Receiver input voltage | -25 | 25 | V | 3 | |||
| Driver output voltage | -13.2 | 13.2 | V | 3 | |||
| Receiver output voltage | -0.3 | V | 3 | ||||
| Storage temperature | -65 | 150 | ℃ | 3 | |||
| Junction temperature | 150 | ℃ | 3 | ||||
| Soldering temperature | TLEAD | 245 | ℃ | 3 | |||
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | VCC=3.3V | 4 |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | VCC=5V | 4 |
| Driver input high voltage (DIN) | VIH | 2 | 5.5 | V | VCC=3.3V | 4 | |
| Driver input high voltage (DIN) | VIH | 2.4 | 5.5 | V | VCC=5V | 4 | |
| Driver input low voltage (DIN) | VIL | 0 | 0.8 | V | 4 | ||
| Receiver input voltage (RIN) | VI | -25 | 25 | V | 4 | ||
| Operating temperature | -40 | 85 | ℃ | 4 | |||
| Supply current | ICC | 1 | mA | 空载,VCC=3.3V or 5.0V,TA=25℃ | 4 | ||
| Driver output high voltage | VOH | 5 | 5.4 | V | DOUT 负载 RL=3kΩ,DIN=GND | 4 | |
| Driver output low voltage | VOL | -5.4 | -5 | V | DOUT 负载 RL=3kΩ,DIN=VCC | 4 | |
| Driver high-level input current | IIH | -1 | 0.01 | 1 | µA | VI=VCC | 4 |
| Driver low-level input current | IIL | -1 | 0.01 | 1 | µA | VI 接 GND | 4 |
| Driver short-circuit output current | IOS | -35 | 35 | mA | VCC=3.6V,VO=0V | 4 | |
| Driver short-circuit output current | IOS | -60 | 60 | mA | VCC=5.5V,VO=0V | 4 | |
| Receiver output low voltage | VOL | 0.4 | mV | IOL=1.6mA | 4 | ||
| Positive-going input threshold voltage | VIT+ | 1.5 | 2.4 | V | VCC=3.3V | 4 | |
| Positive-going input threshold voltage | VIT+ | 2 | 2.4 | V | VCC=5V | 4 | |
| Negative-going input threshold voltage | VIT- | 0.6 | 1.1 | V | VCC=3.3V | 4 | |
| Negative-going input threshold voltage | VIT- | 0.8 | 1.5 | V | VCC=5V | 4 | |
| Receiver input impedance | ri | 3 | 5 | 7 | kΩ | VI=±3V 至±25V | 4 |
| ESD HBM (232 pins) | V(ESD) | -15 | 15 | kV | HBM 人体模式 | 4 | |
| ESD MM (232 pins) | V(ESD) | -800 | 800 | V | MM 机器模式 | 4 | |
| ESD contact discharge IEC 61000-4-2 (232 pins) | V(ESD) | -10 | 10 | kV | 接触放电 IEC 61000-4-2 | 4 | |
| ESD air discharge IEC 61000-4-2 (232 pins) | V(ESD) | -15 | 15 | kV | 空气放电 IEC 61000-4-2 | 4 | |
| ESD HBM (other pins) | V(ESD) | -4 | 4 | kV | HBM 人体模式 | 4 | |
| ESD MM (other pins) | V(ESD) | -400 | 400 | V | MM 机器模式 | 4 | |
| Maximum data rate | F MAX | 250 | kbps | RL=3kΩ,CL=1000pF | 5 | ||
| Driver output skew | tsk(p) | 100 | ns | RL=3kΩ至7kΩ,CL=150pF 至2500pF,见图 3 | 5 | ||
| Driver slew rate | SR(tr) | 6 | 30 | V/µs | RL=3k 至7kΩ, VCC=3.3V, CL=150pF 至1000pF | 5 | |
| Driver slew rate | SR(tr) | 4 | 30 | V/µs | CL=150pF 至2500pF | 5 | |
| Receiver output propagation delay low to high | tPLH | 150 | ns | CL=150pF,见图 4 | 5 | ||
| Receiver output propagation delay high to low | tPHL | 150 | ns | 5 | |||
| Receiver output skew | tsk(p) | 60 | ns | 5 | |||
| Hysteresis voltage | Vhys | 0.4 | V | 4 |
CAD (KiCad official)
- Symbol:
HG3232AECN - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files:
hg3232aecn-etched.step/hg3232aecn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg3232aecn.step/hg3232aecn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (12 pp, sha256
a57add64ef5360dc, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG3232AECN
**HGSEMI** · RS232 ICs · DIP-16
HG3232AECN from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge pump capacitor; 0.1 µF at VCC=3.3 V or 0.047 µF at VCC=5 V per the recommended capacitor table. |
| 2 | V+ | power_out | Positive voltage generated by the charge pump; absolute maximum 7 V, and V+ minus V- must not exceed 13 V. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge pump capacitor. |
| 4 | C2+ | passive | Positive terminal of the inverting charge pump capacitor; 0.1 µF at 3.3 V or 0.33 µF at 5 V per the recommended capacitor table. |
| 5 | C2- | passive | Negative terminal of the inverting charge pump capacitor. |
| 6 | V- | power_out | Negative voltage generated by the charge pump; absolute maximum -7 V, and V+ minus V- must not exceed 13 V. |
| 7 | DOUT2 | output | RS-232 driver output, typically ±5 V at RL=3 kΩ, with absolute limits of -13.2 V to 13.2 V and short-circuit protection to ground. |
| 8 | RIN2 | input | RS-232 receiver input with an input voltage range of -25 V to 25 V and typical input impedance 5 kΩ. |
| 9 | ROUT2 | output | TTL/CMOS receiver output; absolute range -0.3 V to VCC+0.3 V, with VOH of VCC-0.2 V typical at IOH=-1 mA. |
| 10 | DIN2 | input | TTL/CMOS driver input; VIL maximum 0.8 V, VIH minimum 2.0 V at VCC=3.3 V or 2.4 V at VCC=5 V, absolute range -0.3 V to +6 V. |
| 11 | DIN1 | input | TTL/CMOS driver input; VIL maximum 0.8 V, VIH minimum 2.0 V at VCC=3.3 V or 2.4 V at VCC=5 V, absolute range -0.3 V to +6 V. |
| 12 | ROUT1 | output | TTL/CMOS receiver output; absolute range -0.3 V to VCC+0.3 V, with VOH of VCC-0.2 V typical at IOH=-1 mA. |
| 13 | RIN1 | input | RS-232 receiver input with an input voltage range of -25 V to 25 V and typical input impedance 5 kΩ. |
| 14 | DOUT1 | output | RS-232 driver output, typically ±5 V at RL=3 kΩ, with absolute limits of -13.2 V to 13.2 V and short-circuit protection to ground. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage of +3.0 V to +5.5 V; absolute maximum 6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | | | 6 | V | | 3 |
| Charge pump positive output voltage (note 1) | V+ | -0.3 | | 7 | V | | 3 |
| Charge pump negative output voltage (note 1) | V- | -7 | | -0.3 | V | | 3 |
| Driver output voltage between V+ and V- (note 1) | V+ ~ V- | | | 13 | V | | 3 |
| Driver input voltage | | -0.3 | | 6 | V | | 3 |
| Receiver input voltage | | -25 | | 25 | V | | 3 |
| Driver output voltage | | -13.2 | | 13.2 | V | | 3 |
| Receiver output voltage | | -0.3 | | | V | | 3 |
| Storage temperature | | -65 | | 150 | ℃ | | 3 |
| Junction temperature | | | | 150 | ℃ | | 3 |
| Soldering temperature | TLEAD | | | 245 | ℃ | | 3 |
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | VCC=3.3V | 4 |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | VCC=5V | 4 |
| Driver input high voltage (DIN) | VIH | 2 | | 5.5 | V | VCC=3.3V | 4 |
| Driver input high voltage (DIN) | VIH | 2.4 | | 5.5 | V | VCC=5V | 4 |
| Driver input low voltage (DIN) | VIL | 0 | | 0.8 | V | | 4 |
| Receiver input voltage (RIN) | VI | -25 | | 25 | V | | 4 |
| Operating temperature | | -40 | | 85 | ℃ | | 4 |
| Supply current | ICC | | | 1 | mA | 空载,VCC=3.3V or 5.0V,TA=25℃ | 4 |
| Driver output high voltage | VOH | 5 | | 5.4 | V | DOUT 负载 RL=3kΩ,DIN=GND | 4 |
| Driver output low voltage | VOL | -5.4 | | -5 | V | DOUT 负载 RL=3kΩ,DIN=VCC | 4 |
| Driver high-level input current | IIH | -1 | 0.01 | 1 | µA | VI=VCC | 4 |
| Driver low-level input current | IIL | -1 | 0.01 | 1 | µA | VI 接 GND | 4 |
| Driver short-circuit output current | IOS | -35 | | 35 | mA | VCC=3.6V,VO=0V | 4 |
| Driver short-circuit output current | IOS | -60 | | 60 | mA | VCC=5.5V,VO=0V | 4 |
| Receiver output low voltage | VOL | | | 0.4 | mV | IOL=1.6mA | 4 |
| Positive-going input threshold voltage | VIT+ | 1.5 | | 2.4 | V | VCC=3.3V | 4 |
| Positive-going input threshold voltage | VIT+ | 2 | | 2.4 | V | VCC=5V | 4 |
| Negative-going input threshold voltage | VIT- | 0.6 | | 1.1 | V | VCC=3.3V | 4 |
| Negative-going input threshold voltage | VIT- | 0.8 | | 1.5 | V | VCC=5V | 4 |
| Receiver input impedance | ri | 3 | 5 | 7 | kΩ | VI=±3V 至±25V | 4 |
| ESD HBM (232 pins) | V(ESD) | -15 | | 15 | kV | HBM 人体模式 | 4 |
| ESD MM (232 pins) | V(ESD) | -800 | | 800 | V | MM 机器模式 | 4 |
| ESD contact discharge IEC 61000-4-2 (232 pins) | V(ESD) | -10 | | 10 | kV | 接触放电 IEC 61000-4-2 | 4 |
| ESD air discharge IEC 61000-4-2 (232 pins) | V(ESD) | -15 | | 15 | kV | 空气放电 IEC 61000-4-2 | 4 |
| ESD HBM (other pins) | V(ESD) | -4 | | 4 | kV | HBM 人体模式 | 4 |
| ESD MM (other pins) | V(ESD) | -400 | | 400 | V | MM 机器模式 | 4 |
| Maximum data rate | F MAX | 250 | | | kbps | RL=3kΩ,CL=1000pF | 5 |
| Driver output skew | tsk(p) | | | 100 | ns | RL=3kΩ至7kΩ,CL=150pF 至2500pF,见图 3 | 5 |
| Driver slew rate | SR(tr) | 6 | | 30 | V/µs | RL=3k 至7kΩ, VCC=3.3V, CL=150pF 至1000pF | 5 |
| Driver slew rate | SR(tr) | 4 | | 30 | V/µs | CL=150pF 至2500pF | 5 |
| Receiver output propagation delay low to high | tPLH | | | 150 | ns | CL=150pF,见图 4 | 5 |
| Receiver output propagation delay high to low | tPHL | | | 150 | ns | | 5 |
| Receiver output skew | tsk(p) | | | 60 | ns | | 5 |
| Hysteresis voltage | Vhys | | 0.4 | | V | | 4 |
## CAD (KiCad official)
- Symbol: `HG3232AECN`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files: `hg3232aecn-etched.step` / `hg3232aecn-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg3232aecn.step` / `hg3232aecn.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603058302364635136) (12 pp, sha256 `a57add64ef5360dc`, retrieved 2026-11-12, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg3232aecn-datasheet.pdf)