main
Ray
hg2594m-12: laser-etched CAD + chip hero (factory 2.0.0 backfill)
357c339
HG2594M-12
HGSEMI · AC-DC Controllers and Regulators · SOP-8
HG2594M-12 from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No-connect pin. No internal function; may be left floating. |
| 2 | NC | unconnected | No-connect pin. No internal function; may be left floating. |
| 3 | NC | unconnected | No-connect pin. No internal function; may be left floating. |
| 4 | FEEDBACK | input | Voltage feedback input. Monitors the output voltage through an external resistor divider network for regulation. Internal reference threshold is 1.23 V. On fixed-output variants (like the -12) this is tied to the output through an internal divider network. |
| 5 | ON/OFF | input | Enable/shutdown control input (active-low enable). Tie to GND (low) to enable the regulator; drive high to shut down the chip. Defaults to low (enabled) when left floating. Threshold: high >=1.4 V (OFF), low <=0.8 V (ON). |
| 6 | GND | power_in | Ground/return pin. Must be routed carefully in layout; the return path from the output node through the Schottky catch diode should share this ground to suppress switching-current spikes and noise. |
| 7 | VIN | power_in | Input supply pin. Requires 4.5 V-40 V DC (HV variant: up to 60 V); the -12 fixed variant requires VIN >= 15 V for full 12 V regulation. Bypass with a large-value capacitor (e.g. 220 uF/50 V) to ground close to the pin to suppress input noise. |
| 8 | OUTPUT | output | Power switch output pin. This is the switching node driven by the internal power MOSFET; connects to the external inductor and Schottky catch diode to deliver up to 1 A to the load. Saturation voltage typically 1.3 V at 1 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HG2594M-12/TRHG2594ME-12/TRHG2594HVM-12/TR
CAD (KiCad official)
- Symbol:
HG2594M-12 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hg2594m-12-etched.step/hg2594m-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg2594m-12.step/hg2594m-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (12 pp, sha256
d4af4acaad0ab6e7, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG2594M-12
**HGSEMI** · AC-DC Controllers and Regulators · SOP-8
HG2594M-12 from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No-connect pin. No internal function; may be left floating. |
| 2 | NC | unconnected | No-connect pin. No internal function; may be left floating. |
| 3 | NC | unconnected | No-connect pin. No internal function; may be left floating. |
| 4 | FEEDBACK | input | Voltage feedback input. Monitors the output voltage through an external resistor divider network for regulation. Internal reference threshold is 1.23 V. On fixed-output variants (like the -12) this is tied to the output through an internal divider network. |
| 5 | ON/OFF | input | Enable/shutdown control input (active-low enable). Tie to GND (low) to enable the regulator; drive high to shut down the chip. Defaults to low (enabled) when left floating. Threshold: high >=1.4 V (OFF), low <=0.8 V (ON). |
| 6 | GND | power_in | Ground/return pin. Must be routed carefully in layout; the return path from the output node through the Schottky catch diode should share this ground to suppress switching-current spikes and noise. |
| 7 | VIN | power_in | Input supply pin. Requires 4.5 V-40 V DC (HV variant: up to 60 V); the -12 fixed variant requires VIN >= 15 V for full 12 V regulation. Bypass with a large-value capacitor (e.g. 220 uF/50 V) to ground close to the pin to suppress input noise. |
| 8 | OUTPUT | output | Power switch output pin. This is the switching node driven by the internal power MOSFET; connects to the external inductor and Schottky catch diode to deliver up to 1 A to the load. Saturation voltage typically 1.3 V at 1 A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HG2594M-12/TR`
- `HG2594ME-12/TR`
- `HG2594HVM-12/TR`
## CAD (KiCad official)
- Symbol: `HG2594M-12`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hg2594m-12-etched.step` / `hg2594m-12-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg2594m-12.step` / `hg2594m-12.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg2594m-12-datasheet.pdf) (12 pp, sha256 `d4af4acaad0ab6e7`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg2594m-12-datasheet.pdf)