Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HG24C64CM

HGSEMI · EEPROM · SOP-8

HG24C64CM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Device address input that can be tied to VCC or GND in any combination (up to eight devices on a bus) and is internally pulled down to GND if left floating.
2 E1 input Device address input that can be tied to VCC or GND in any combination (up to eight devices on a bus) and is internally pulled down to GND if left floating.
3 E2 input Device address input that can be tied to VCC or GND in any combination (up to eight devices on a bus) and is internally pulled down to GND if left floating.
4 GND power_in Ground reference for the power supply, to be connected to system ground.
5 SDA bidirectional Serial data pin, an open-drain bidirectional input/output used to transfer data to and from the device.
6 SCL input Serial clock input that controls data flow, latching input data on the rising edge and clocking output data on the falling edge of SCL.
7 WP input Write protection input that makes the entire memory read-only when connected to VCC, enables writes when connected to GND, and is internally pulled down to GND if left floating.
8 VCC power_in Device power supply pin with a supply range of 1.7V to 5.5V; operation at invalid VCC voltages may produce spurious results.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature with power applied -55 130 °C 17
Storage temperature TSTG -65 150 °C 17
Lead Temperature (Soldering, 10 seconds) TL 245 °C Soldering, 10 seconds 17
Supply voltage VCC -0.5 6 V 17
Voltage on input Pins VIN -0.5 6 V 17
Electrostatic pulse (human body model) VESD 6000 V Human body model 17
Operating range ambient temperature TA -40 105 °C Operating range 17
Operating range supply voltage VCC 1.7 5.5 V Operating range 17
Supply Current (Read) ICC1 0.1 mA VCC= 1.7V, Read at 1MHz 17
Supply Current (Read) ICC1 0.4 mA VCC= 5.5V, Read at 400 kHz 17
Supply Current (Read) ICC1 0.5 mA VCC= 5.5V, Read at 1MHz 17
Supply Current (Write) ICC2 0.2 mA VCC= 1.7V, Write at 400 kHz 17
Supply Current (Write) ICC2 0.5 mA VCC= 5.5V, Write at 400 kHz 17
Standby Current ISB 0.5 μA VCC = 1.7V, VIN = VCC or GND 17
Standby Current ISB 1 μA VCC = 5.5V, VIN = VCC or GND 17
Input Leakage Current ILI 1 μA VIN = VCC or GND 17
Output Leakage Current ILO 1 μA VOUT = VCC or GND 17
Input Low-Level Voltage (SDA, SCL) VIL -0.5 V 17
Low-Level Output Voltage VOL1 0.4 V VCC> 2V, IOL= 3mA 17
Low-Level Output Voltage VOL2 0.2 V VCC≤2V, IOL= 2mA 17
Clock Frequency, SCL fSCL 400 kHz Fast Mode; VCC = 1.7V to 5.5V 18
Clock Frequency, SCL fSCL 1000 kHz High Speed Mode; VCC = 1.7V to 5.5V 18
Clock Pulse Width Low tLOW 1300 ns Fast Mode; VCC = 1.7V to 5.5V 18
Clock Pulse Width Low tLOW 600 ns High Speed Mode; VCC = 1.7V to 5.5V 18
Clock Pulse Width High tHIGH 600 ns Fast Mode; VCC = 1.7V to 5.5V 18
Clock Pulse Width High tHIGH 260 ns High Speed Mode; VCC = 1.7V to 5.5V 18
SDA Rise Time tR 300 ns Fast Mode; VCC = 1.7V to 5.5V 18
SDA(Out) Fall Time tF 300 ns Fast Mode; VCC = 1.7V to 5.5V 18
SDA(Out) Fall Time tF 100 ns High Speed Mode; VCC = 1.7V to 5.5V 18
Start Hold Time tHD.STA 600 ns Fast Mode; VCC = 1.7V to 5.5V 18
Start Hold Time tHD.STA 250 ns High Speed Mode; VCC = 1.7V to 5.5V 18
Start Setup Time tSU.STA 600 ns Fast Mode; VCC = 1.7V to 5.5V 18
Start Setup Time tSU.STA 250 ns High Speed Mode; VCC = 1.7V to 5.5V 18
Stop Setup Time tSU.STO 600 ns Fast Mode; VCC = 1.7V to 5.5V 18
Stop Setup Time tSU.STO 250 ns High Speed Mode; VCC = 1.7V to 5.5V 18
Bus Free Time between Stop and Next Start tBUF 1300 ns Fast Mode; VCC = 1.7V to 5.5V 18
Bus Free Time between Stop and Next Start tBUF 500 ns High Speed Mode; VCC = 1.7V to 5.5V 18
Data In Hold Time tHD.DI 0 ns Fast Mode; VCC = 1.7V to 5.5V 18
Data In Setup Time tSU.DAT 100 ns Fast Mode; VCC = 1.7V to 5.5V 18
Data In Setup Time tSU.DAT 50 ns High Speed Mode; VCC = 1.7V to 5.5V 18
Data Out Hold Time tHD.DAT 50 ns Fast Mode; VCC = 1.7V to 5.5V 18
SCL Low to Data Out Valid tAA 100 900 ns Fast Mode; VCC = 1.7V to 5.5V 18
SCL Low to Data Out Valid tAA 50 500 ns High Speed Mode; VCC = 1.7V to 5.5V 18
WP Pin Setup Time tSU.WP 1200 ns Fast Mode; VCC = 1.7V to 5.5V 18
WP Pin Setup Time tSU.WP 600 ns High Speed Mode; VCC = 1.7V to 5.5V 18
WP Pin Hold Time tHD.WP 1200 ns Fast Mode; VCC = 1.7V to 5.5V 18
WP Pin Hold Time tHD.WP 600 ns High Speed Mode; VCC = 1.7V to 5.5V 18
Write Cycle Time tWR 3 ms 18
Noise Suppression Time tI 50 ns Fast Mode; VCC = 1.7V to 5.5V 18
Input/output Capacitance (SDA) CI/O 8 pF VI/O = 0V 19
Input Capacitance (other Pins) CIN 6 pF VIN = 0V 19
Data Retention DR 200 year TA = +25°C 19

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs VESD Electrostatic pulse (human body model) 6000 V Note: Stresses beyond those listed under ‘Absolute Maximum Ratings’ may cause permanent damage to the device. Functional operation 17

CAD (KiCad official)

  • Symbol: HG24C64CM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hg24c64cm-etched.step / hg24c64cm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hg24c64cm.step / hg24c64cm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (24 pp, sha256 f056bd3fe7ad9626, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF