← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# HG24C256CMM++**HGSEMI** · EEPROM · MSOP-8++HG24C256CMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | E0 | input | Device address input bit 0. Hard-wired to VCC or GND to set the least-significant bit of the 7-bit I2C slave address, allowing up to 8 devices on the same bus. |+| 2 | E1 | input | Device address input bit 1. Hard-wired to VCC or GND to set the middle bit of the 3-bit hard-coded portion of the I2C slave address. |+| 3 | E2 | input | Device address input bit 2. Hard-wired to VCC or GND to set the most-significant bit of the 3-bit hard-coded portion of the I2C slave address. |+| 4 | GND | power_in | Ground reference for the power supply. Must be connected to the system ground. |+| 5 | SDA | bidirectional | Serial Data. Open-drain bidirectional I2C data line used to serially transfer data to and from the device. Requires an external pull-up resistor to VCC. Includes Schmitt trigger and spike filter. |+| 6 | SCL | input | Serial Clock input. Provides the clock for the I2C interface; data on SDA is latched on the rising edge and clocked out on the falling edge of SCL. Supports 400 kHz standard and up to 1 MHz operation. |+| 7 | WP | input | Write Protection. When tied to VCC, the entire memory array (and Identification Page) is write-protected (read-only); when tied to GND or left floating, write operations are enabled. Driving WP high causes data bytes to be NACKed. |+| 8 | VCC | power_in | Device power supply, 1.7V to 5.5V. Operations at invalid VCC voltages may produce spurious results and should not be attempted; a decoupling capacitor to GND is recommended. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HGSEMI |+| Package | MSOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `HG24C256CMM/TR`+- `HG24C256CMMN`+- `HG24C256CMMM/TR`+- `HG24C256CMMMT/TR`++## CAD (KiCad official)++- Symbol: `HG24C256CMM`+- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`+- 3D model: MSOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HGSEMI datasheet](docs/hg24c256cmm-datasheet.pdf) (25 pp, sha256 `9c3fe59cf82149a2`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hg24c256cmm-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "hg24c256cmm",+ "version": "0.1.0",+ "type": "component",+ "description": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "hg24c256cmm"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "hg24c256cmm.kicad_sym",+ "hg24c256cmm.kicad_mod",+ "hg24c256cmm.glb",+ "hg24c256cmm.step",+ "hg24c256cmm.lbr",+ "docs/hero.png",+ "docs/hg24c256cmm-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}