← Commit history
page.json+134−8@@ -1,13 +1,144 @@ {+ "schema_version": 1,+ "type": "component", "slug": "hg24c256cmm",+ "title": "HG24C256CMM",+ "brief": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "hg24c256cmm" ],+ "component": {+ "mpn": "HG24C256CMM",+ "manufacturer": "HGSEMI",+ "package": "MSOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/9eafa7395af3165cee1b5a14027a09ff.pdf",+ "parts": {+ "symbol": "hg24c256cmm.kicad_sym",+ "footprint": "hg24c256cmm.kicad_mod",+ "model_3d": "hg24c256cmm.glb",+ "model_3d_step": "hg24c256cmm.step",+ "lbr": "hg24c256cmm.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "E0",+ "type": "input",+ "description": "Device address input bit 0. Hard-wired to VCC or GND to set the least-significant bit of the 7-bit I2C slave address, allowing up to 8 devices on the same bus."+ },+ {+ "number": "2",+ "name": "E1",+ "type": "input",+ "description": "Device address input bit 1. Hard-wired to VCC or GND to set the middle bit of the 3-bit hard-coded portion of the I2C slave address."+ },+ {+ "number": "3",+ "name": "E2",+ "type": "input",+ "description": "Device address input bit 2. Hard-wired to VCC or GND to set the most-significant bit of the 3-bit hard-coded portion of the I2C slave address."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the power supply. Must be connected to the system ground."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial Data. Open-drain bidirectional I2C data line used to serially transfer data to and from the device. Requires an external pull-up resistor to VCC. Includes Schmitt trigger and spike filter."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial Clock input. Provides the clock for the I2C interface; data on SDA is latched on the rising edge and clocked out on the falling edge of SCL. Supports 400 kHz standard and up to 1 MHz operation."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Write Protection. When tied to VCC, the entire memory array (and Identification Page) is write-protected (read-only); when tied to GND or left floating, write operations are enabled. Driving WP high causes data bytes to be NACKed."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Device power supply, 1.7V to 5.5V. Operations at invalid VCC voltages may produce spurious results and should not be attempted; a decoupling capacitor to GND is recommended."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/9eafa7395af3165cee1b5a14027a09ff.pdf",+ "pages": 25,+ "sha256": "9c3fe59cf82149a2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "HGSEMI",+ "Package": "MSOP-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "variants": [+ {+ "mpn": "HG24C256CMM/TR",+ "kind": "packaging"+ },+ {+ "mpn": "HG24C256CMMN",+ "kind": "packaging"+ },+ {+ "mpn": "HG24C256CMMM/TR",+ "kind": "packaging"+ },+ {+ "mpn": "HG24C256CMMMT/TR",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "hg24c256cmm"+ ],+ "discovery_pitch": "HG24C256CMM (HGSEMI) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +156,5 @@ "docs/hg24c256cmm-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }