main
Ray hg24c256cm: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… 5d886f2
{
  "slug": "hg24c256cm",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "hg24c256cm"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hg24c256cm.kicad_sym",
    "hg24c256cm.kicad_mod",
    "hg24c256cm.glb",
    "hg24c256cm.step",
    "hg24c256cm.lbr",
    "docs/hero.png",
    "docs/hg24c256cm-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hg24c256cm-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HG24C256CM",
    "manufacturer": "HGSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "EEPROM",
    "parts": {
      "symbol": "hg24c256cm.kicad_sym",
      "footprint": "hg24c256cm.kicad_mod",
      "model_3d": "hg24c256cm-etched.glb",
      "model_3d_plain": "hg24c256cm.glb",
      "model_3d_step": "hg24c256cm-etched.step",
      "model_3d_step_plain": "hg24c256cm.step",
      "lbr": "hg24c256cm.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "E0",
        "type": "input",
        "description": "Device address input bit 0. Hard-wired to VCC or GND; forms the least-significant bit of the 3-bit slave-address field, allowing up to 8 devices on one I2C bus. Must match the software address bit in the device address byte."
      },
      {
        "number": "2",
        "name": "E1",
        "type": "input",
        "description": "Device address input bit 1. Hard-wired to VCC or GND; forms the middle bit of the 3-bit slave-address field used to select among up to 8 devices on the bus."
      },
      {
        "number": "3",
        "name": "E2",
        "type": "input",
        "description": "Device address input bit 2. Hard-wired to VCC or GND; forms the most-significant bit of the 3-bit slave-address field used to select among up to 8 devices on the bus."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the power supply. Connect to the system ground."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C Serial Data. Open-drain bidirectional line used to serially transfer command, address, and data. Requires an external pull-up (see Figure 19). VIL max = 0.3*VCC, VIH min = 0.7*VCC; VOL ≤ 0.4V at IOL = 3 mA (VCC > 2V)."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I2C Serial Clock. Master-driven clock; data on SDA is latched on the rising edge and clocked out on the falling edge. Supports 400 kHz Fast-mode and 1 MHz High-Speed operation from 1.7V-5.5V."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write Protect. When tied to VCC the entire memory array (and Identification Page) is write-protected - data bytes are NACK'd and the array becomes read-only. When tied to GND or left floating, write operations are enabled."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply, 1.7V to 5.5V. Absolute max 6.0V. Standby current 1 µA max at 5.5V; read current 0.5 mA max at 1 MHz; write current 1 mA max at 5.5V/400 kHz."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:59:34Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "hg24c256cm.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hg24c256cm-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "65fedcd8abed2aeb49befe37cee31acff75f2958845767a044d496016ceae027",
        "checked": "2026-11-03",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}