main
Ray hg24c16n: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 817dc31
{
  "slug": "hg24c16n",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI EEPROM, DIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "hg24c16n"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hg24c16n.kicad_sym",
    "hg24c16n.kicad_mod",
    "hg24c16n.glb",
    "hg24c16n.step",
    "hg24c16n.lbr",
    "docs/hero.png",
    "docs/hg24c16n-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hg24c16n-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HG24C16N",
    "manufacturer": "HGSEMI",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "EEPROM",
    "parts": {
      "symbol": "hg24c16n.kicad_sym",
      "footprint": "hg24c16n.kicad_mod",
      "model_3d": "hg24c16n-etched.glb",
      "model_3d_plain": "hg24c16n.glb",
      "model_3d_step": "hg24c16n-etched.step",
      "model_3d_step_plain": "hg24c16n.step",
      "lbr": "hg24c16n.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "unconnected",
        "description": "No connect on the HG24C16 (the 16K variant does not use device-address pins). May be left floating or tied to GND for lowest noise. On smaller-density parts in the family, A0 is a hard-wired I2C slave-address input."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "unconnected",
        "description": "No connect on the HG24C16. May be left floating or tied to GND. On smaller-density parts in the family, A1 is a hard-wired I2C slave-address input."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "unconnected",
        "description": "No connect on the HG24C16. May be left floating or tied to GND. On smaller-density parts in the family, A2 is a hard-wired I2C slave-address input."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for supply and all I/O signals."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data. Bidirectional open-drain line; requires an external pull-up resistor to VCC (typically 1.3 kΩ at 2.5-5 V or 10 kΩ at 1.8 V). May be wire-ORed with other open-drain devices on the same bus."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input. Positive edge clocks data into the EEPROM, negative edge clocks data out. Requires an external pull-up to VCC. Supports up to 1 MHz at 5 V and 400 kHz at 1.7-2.7 V."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write Protect. Tie to GND for normal read/write operation; tie to VCC to hardware-protect the full 16K array against writes. Schmitt-trigger filtered input."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, 1.7 V to 5.5 V. Typical operating current 0.4 mA (read) / 2.0 mA (write) at 5 V, 100 kHz; standby current 2.0 µA max. Absolute maximum 6.5 V."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C2688461",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:59:32Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "hg24c16n.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hg24c16n-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2bb27c886a69268e1cb9a186089446ae1a64439944d82796f68851995b07c6e9",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}