← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "hg24c128mm",+ "title": "HG24C128MM",+ "brief": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "hg24c128mm" ],+ "component": {+ "mpn": "HG24C128MM",+ "manufacturer": "HGSEMI",+ "package": "MSOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2404031724_HGSEMI-HG24C128MM-TR_C5310841.pdf",+ "parts": {+ "symbol": "hg24c128mm.kicad_sym",+ "footprint": "hg24c128mm.kicad_mod",+ "model_3d": "hg24c128mm.glb",+ "model_3d_step": "hg24c128mm.step",+ "lbr": "hg24c128mm.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "A0",+ "type": "input",+ "description": "Device address input bit 0. Hardwired to VCC or GND to set part of the 3-bit I2C device address, allowing up to 8 devices on a bus. Internally biased to a logic low if left floating (when VCC-plane coupling is <3 pF); tie to GND for coupling >3 pF."+ },+ {+ "number": "2",+ "name": "A1",+ "type": "input",+ "description": "Device address input bit 1. Hardwired to VCC or GND to set part of the 3-bit I2C device address. Internally biased to a logic low if left floating (when VCC-plane coupling is <3 pF); tie to GND for coupling >3 pF."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave unconnected."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data line for the two-wire (I2C) interface. Bi-directional, open-drain output requiring an external pull-up resistor; may be wire-ORed with other open-drain/open-collector devices."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial clock input for the two-wire (I2C) interface. Positive edge clocks data into the EEPROM and negative edge clocks data out. Supports 1 MHz at 5V and 400 kHz at 1.8/2.7/3.3V."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Write protect input. Tie to GND for normal read/write; tie to VCC to inhibit all writes to the memory array (hardware data protection). Internally biased to a logic low if left floating (VCC-plane coupling <3 pF); tie to GND for coupling >3 pF."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage input. Operating range 1.8V to 5.5V. Standby current ISB = 3 \u00b5A at 5.5V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2404031724_HGSEMI-HG24C128MM-TR_C5310841.pdf",+ "pages": 14,+ "sha256": "a9630ce0b45ca10b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "HGSEMI",+ "Package": "MSOP-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "hg24c128mm"+ ],+ "discovery_pitch": "HG24C128MM (HGSEMI) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/hg24c128mm-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }