main
Ray hg24c08mm: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… 33c822d
{
  "slug": "hg24c08mm",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "hg24c08mm"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hg24c08mm.kicad_sym",
    "hg24c08mm.kicad_mod",
    "hg24c08mm.glb",
    "hg24c08mm.step",
    "hg24c08mm.lbr",
    "docs/hero.png",
    "docs/hg24c08mm-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hg24c08mm-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HG24C08MM",
    "manufacturer": "HGSEMI",
    "package": "MSOP-8",
    "pin_count": 8,
    "category": "EEPROM",
    "parts": {
      "symbol": "hg24c08mm.kicad_sym",
      "footprint": "hg24c08mm.kicad_mod",
      "model_3d": "hg24c08mm-etched.glb",
      "model_3d_plain": "hg24c08mm.glb",
      "model_3d_step": "hg24c08mm-etched.step",
      "model_3d_step_plain": "hg24c08mm.step",
      "lbr": "hg24c08mm.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Device address input. Compared against bit A2 of the incoming I²C device-address byte to enable this chip; up to two HG24C08 devices can share a single bus. VIH = 0.7·VCC min, VIL = 0.3·VCC max. Input capacitance 6 pF max."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for supply and logic."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I²C serial data, bidirectional, open-drain. Requires an external pull-up resistor (typ. 1.3 kΩ at 2.5 V/5 V, 10 kΩ at 1.8 V). Input capacitance 8 pF max. Sinks IOL = 3.0 mA at VOL ≤ 0.4 V (VCC = 5 V)."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I²C serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered, filtered input. Max fSCL = 1 MHz at 5 V, 400 kHz at 1.7 V-2.7 V. Input capacitance 6 pF max."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write Protect. Tie to GND for normal read/write operations. When tied to VCC, the entire 8K array is write-protected in hardware. Should not be left floating."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, 1.7 V to 5.5 V. Read current ≈ 0.4 mA typ (1 mA max) at 5 V/100 kHz; write current ≈ 2 mA typ (3 mA max); standby current ≤ 2 µA. Decouple with a local bypass capacitor to GND."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:59:28Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "hg24c08mm.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          0.95
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hg24c08mm-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          0.95
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1363b6428a776beda0ecd0cc7a0fa6fba464ed01d3e2293c8b5583e646275b79",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}