main
Ray
hg24c08mm: laser-etched CAD + chip hero (factory 2.0.0 backfill)
a5b37c5
HG24C08MM
HGSEMI · EEPROM · MSOP-8
HG24C08MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max. |
| 2 | A1 | input | Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max. |
| 3 | A2 | input | Device address input. Compared against bit A2 of the incoming I²C device-address byte to enable this chip; up to two HG24C08 devices can share a single bus. VIH = 0.7·VCC min, VIL = 0.3·VCC max. Input capacitance 6 pF max. |
| 4 | GND | power_in | Ground reference for supply and logic. |
| 5 | SDA | bidirectional | I²C serial data, bidirectional, open-drain. Requires an external pull-up resistor (typ. 1.3 kΩ at 2.5 V/5 V, 10 kΩ at 1.8 V). Input capacitance 8 pF max. Sinks IOL = 3.0 mA at VOL ≤ 0.4 V (VCC = 5 V). |
| 6 | SCL | input | I²C serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered, filtered input. Max fSCL = 1 MHz at 5 V, 400 kHz at 1.7 V-2.7 V. Input capacitance 6 pF max. |
| 7 | WP | input | Write Protect. Tie to GND for normal read/write operations. When tied to VCC, the entire 8K array is write-protected in hardware. Should not be left floating. |
| 8 | VCC | power_in | Supply voltage, 1.7 V to 5.5 V. Read current ≈ 0.4 mA typ (1 mA max) at 5 V/100 kHz; write current ≈ 2 mA typ (3 mA max); standby current ≤ 2 µA. Decouple with a local bypass capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
HG24C08MM/TRHG24C08MMNHG24C08MMM/TRHG24C08MMM-4K/TRHG24C08MMM5/TRHG24C08MMM8/TRHG24C08MMDQ3/TRHG24C08MMDQ2/TR
CAD (KiCad official)
- Symbol:
HG24C08MM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
hg24c08mm-etched.step/hg24c08mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg24c08mm.step/hg24c08mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (None pp, sha256
228b5241d9f7dc0a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG24C08MM
**HGSEMI** · EEPROM · MSOP-8
HG24C08MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max. |
| 2 | A1 | input | Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max. |
| 3 | A2 | input | Device address input. Compared against bit A2 of the incoming I²C device-address byte to enable this chip; up to two HG24C08 devices can share a single bus. VIH = 0.7·VCC min, VIL = 0.3·VCC max. Input capacitance 6 pF max. |
| 4 | GND | power_in | Ground reference for supply and logic. |
| 5 | SDA | bidirectional | I²C serial data, bidirectional, open-drain. Requires an external pull-up resistor (typ. 1.3 kΩ at 2.5 V/5 V, 10 kΩ at 1.8 V). Input capacitance 8 pF max. Sinks IOL = 3.0 mA at VOL ≤ 0.4 V (VCC = 5 V). |
| 6 | SCL | input | I²C serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered, filtered input. Max fSCL = 1 MHz at 5 V, 400 kHz at 1.7 V-2.7 V. Input capacitance 6 pF max. |
| 7 | WP | input | Write Protect. Tie to GND for normal read/write operations. When tied to VCC, the entire 8K array is write-protected in hardware. Should not be left floating. |
| 8 | VCC | power_in | Supply voltage, 1.7 V to 5.5 V. Read current ≈ 0.4 mA typ (1 mA max) at 5 V/100 kHz; write current ≈ 2 mA typ (3 mA max); standby current ≤ 2 µA. Decouple with a local bypass capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
- `HG24C08MM/TR`
- `HG24C08MMN`
- `HG24C08MMM/TR`
- `HG24C08MMM-4K/TR`
- `HG24C08MMM5/TR`
- `HG24C08MMM8/TR`
- `HG24C08MMDQ3/TR`
- `HG24C08MMDQ2/TR`
## CAD (KiCad official)
- Symbol: `HG24C08MM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `hg24c08mm-etched.step` / `hg24c08mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg24c08mm.step` / `hg24c08mm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg24c08mm-datasheet.pdf) (None pp, sha256 `228b5241d9f7dc0a`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg24c08mm-datasheet.pdf)