main
Ray
hg24c04mm: laser-etched CAD + chip hero (factory 2.0.0 backfill)
a1f512b
HG24C04MM
HGSEMI · EEPROM · MSOP-8
HG24C04MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Not connected on HG24C04. The device only uses A1 and A2 for hardwired addressing; A0 is a no-connect and can be tied to ground. |
| 2 | A1 | input | Device address input. Hardwired to VCC or GND to set the least-significant device address bit; must match the corresponding bit in the I2C device address word to enable the chip. |
| 3 | A2 | input | Device address input. Hardwired to VCC or GND. Together with A1, allows up to four HG24C04 devices to share a single I2C bus. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Bidirectional serial data line for the two-wire (I2C) interface. Open-drain output; requires an external pull-up resistor to VCC. May be wire-ORed with any number of other open-drain or open-collector devices. |
| 6 | SCL | input | Serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered filtered input for noise suppression. Supports 1 MHz at 5V and 400 kHz at 1.8/2.5/2.7V. |
| 7 | WP | input | Write Protect input. Tie to GND for normal read/write operation; tie to VCC to hardware-write-protect the full 4K array. |
| 8 | VCC | power_in | Positive supply voltage, 1.7V to 5.5V. Bypass with a 0.1uF ceramic capacitor to GND close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HG24C04MM/TRHG24C04MMNHG24C04MMM/TRHG24C04MMM-4K/TRHG24C04MMM5/TRHG24C04MMM8/TRHG24C04MMDQ3/TRHG24C04MMDQ2/TR
CAD (KiCad official)
- Symbol:
HG24C04MM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
hg24c04mm-etched.step/hg24c04mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg24c04mm.step/hg24c04mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (19 pp, sha256
228b5241d9f7dc0a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG24C04MM
**HGSEMI** · EEPROM · MSOP-8
HG24C04MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Not connected on HG24C04. The device only uses A1 and A2 for hardwired addressing; A0 is a no-connect and can be tied to ground. |
| 2 | A1 | input | Device address input. Hardwired to VCC or GND to set the least-significant device address bit; must match the corresponding bit in the I2C device address word to enable the chip. |
| 3 | A2 | input | Device address input. Hardwired to VCC or GND. Together with A1, allows up to four HG24C04 devices to share a single I2C bus. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Bidirectional serial data line for the two-wire (I2C) interface. Open-drain output; requires an external pull-up resistor to VCC. May be wire-ORed with any number of other open-drain or open-collector devices. |
| 6 | SCL | input | Serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered filtered input for noise suppression. Supports 1 MHz at 5V and 400 kHz at 1.8/2.5/2.7V. |
| 7 | WP | input | Write Protect input. Tie to GND for normal read/write operation; tie to VCC to hardware-write-protect the full 4K array. |
| 8 | VCC | power_in | Positive supply voltage, 1.7V to 5.5V. Bypass with a 0.1uF ceramic capacitor to GND close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HG24C04MM/TR`
- `HG24C04MMN`
- `HG24C04MMM/TR`
- `HG24C04MMM-4K/TR`
- `HG24C04MMM5/TR`
- `HG24C04MMM8/TR`
- `HG24C04MMDQ3/TR`
- `HG24C04MMDQ2/TR`
## CAD (KiCad official)
- Symbol: `HG24C04MM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `hg24c04mm-etched.step` / `hg24c04mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg24c04mm.step` / `hg24c04mm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg24c04mm-datasheet.pdf) (19 pp, sha256 `228b5241d9f7dc0a`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg24c04mm-datasheet.pdf)