main
Ray
hg24c04m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi…
7ba08ac
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165
{
"slug": "hg24c04m",
"version": "0.1.0",
"type": "component",
"description": "HGSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"hg24c04m"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"hg24c04m.kicad_sym",
"hg24c04m.kicad_mod",
"hg24c04m.glb",
"hg24c04m.step",
"hg24c04m.lbr",
"docs/hero.png",
"docs/hg24c04m-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"hg24c04m-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "HG24C04M",
"manufacturer": "HGSEMI",
"package": "SOP-8",
"pin_count": 8,
"category": "EEPROM",
"parts": {
"symbol": "hg24c04m.kicad_sym",
"footprint": "hg24c04m.kicad_mod",
"model_3d": "hg24c04m-etched.glb",
"model_3d_plain": "hg24c04m.glb",
"model_3d_step": "hg24c04m-etched.step",
"model_3d_step_plain": "hg24c04m.step",
"lbr": "hg24c04m.lbr"
},
"pins": [
{
"number": "1",
"name": "A0",
"type": "input",
"description": "Device address input A0. Not used on the HG24C04 (only A2 and A1 participate in device addressing); this pin is a no-connect and may be tied to GND."
},
{
"number": "2",
"name": "A1",
"type": "input",
"description": "Device address input A1. Hard-wired to VCC or GND to set one of the device-select bits so that up to four HG24C04 devices can share a single two-wire bus. VIL <= 0.3*VCC, VIH >= 0.7*VCC."
},
{
"number": "3",
"name": "A2",
"type": "input",
"description": "Device address input A2. Hard-wired to VCC or GND to set one of the device-select bits so that up to four HG24C04 devices can share a single two-wire bus. VIL <= 0.3*VCC, VIH >= 0.7*VCC."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground reference (0 V) for the device."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "Serial data line for the two-wire interface. Open-drain output, so an external pull-up (typ. 1.3 kOhm at 2.5-5 V, 10 kOhm at 1.8 V) to VCC is required. Bidirectional; may be wire-ORed with other open-drain devices. Input capacitance <= 8 pF."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "Serial clock input for the two-wire interface. Positive edge clocks data in, negative edge clocks data out. Supports up to 1 MHz at 5 V and 400 kHz at 1.8/2.5/2.7 V. Input capacitance <= 6 pF."
},
{
"number": "7",
"name": "WP",
"type": "input",
"description": "Write Protect. Tie to GND for normal read/write operation; tie to VCC to hardware-protect the full 4 K array against writes."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Positive supply input, 1.7 V to 5.5 V (absolute max 6.5 V). Typical ICC = 0.4 mA read / 2.0 mA write at 5.0 V, 100 kHz; standby current <= 2 uA."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T18:59:25Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "hg24c04m.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "hg24c04m-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "bbdddcb19f12136943de942d1c2914a5d267b480430f2a4c1b7ef22719ed3861",
"checked": "2026-11-03",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}