main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hg24c04cn: viewers · Ray
hg24c04cn-etched.glb Publish 0.1.0 · Ray
hg24c04cn-etched.step hg24c04cn: factory component page (tier=lcsc) · Ray
hg24c04cn-hero.glb hg24c04cn: hero GLB from the etched model (keeps the MPN mark) · Ray
hg24c04cn-hero.overlay.json Publish 0.1.0 · Ray
hg24c04cn.glb Publish 0.1.0 · Ray
hg24c04cn.kicad_mod Publish 0.1.0 · Ray
hg24c04cn.kicad_sym Publish 0.1.0 · Ray
hg24c04cn.lbr Publish 0.1.0 · Ray
hg24c04cn.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

HG24C04CN

HGSEMI · EEPROM · DIP-8

HG24C04CN from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect pin; not internally used per the DIP-8/SOP-8/MSOP-8 pin configuration.
2 E1 input Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating.
3 E2 input Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating.
4 GND power_in Ground reference for the power supply, to be connected to system ground.
5 SDA bidirectional Serial data open-drain bidirectional input/output pin used to transfer data to and from the device.
6 SCL input Serial clock input; command and input data on SDA are latched on the rising edge of SCL and output data is clocked out on the falling edge.
7 WP input Write protection input: connected to VCC makes the memory array read-only, connected to GND enables writes, and floating is internally pulled down to GND.
8 VCC power_in Device power supply pin, operating range 1.7V to 5.5V; operation at invalid VCC voltages should not be attempted.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package DIP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Absolute maximum ambient temperature with power applied TA -40 105 °C 18
Storage temperature TSTG -65 150 °C 18
Supply voltage VCC -0.5 6 V 18
Voltage on input pins VIN -0.5 6 V 18
Electrostatic pulse (human body model) VESD 6000 V Human body model 18
Lead temperature (soldering) TL 260 °C Soldering, 10 seconds 18
Supply voltage VCC 1.7 5.5 V Operating range TA = -40°C to +105°C 18
Supply current (Read) ICC1 0.1 mA VCC = 1.7V, Read at 1MHz 18
Supply current (Read) ICC1 0.4 mA VCC = 5.5V, Read at 400 kHz 18
Supply current (Read) ICC1 0.5 mA VCC = 5.5V, Read at 1MHz 18
Supply current (Write) ICC2 1 mA VCC = 5.5V, Write at 400 kHz 18
Standby current ISB 1 μA VCC = 1.7V, VIN = VCC or GND 18
Input leakage current ILI 1 μA VIN = VCC or GND 18
Output leakage current ILO 1 μA VOUT = VCC or GND 18
Input low-level voltage (SDA, SCL) VIL -0.5 V 18
Low-level output voltage VOL1 0.4 V VCC > 2V, IOL = 3mA 18
Low-level output voltage VOL2 0.2 V VCC ≤ 2V, IOL = 2mA 18
Clock frequency, SCL fSCL 400 kHz Fast mode, VCC = 1.7V to 5.5V 19
Clock frequency, SCL fSCL 1000 kHz High Speed mode, VCC = 1.7V to 5.5V 19
Clock pulse width low tLOW 1300 ns Fast mode, VCC = 1.7V to 5.5V 19
Clock pulse width low tLOW 600 ns High Speed mode, VCC = 1.7V to 5.5V 19
Clock pulse width high tHIGH 600 ns Fast mode, VCC = 1.7V to 5.5V 19
Clock pulse width high tHIGH 260 ns High Speed mode, VCC = 1.7V to 5.5V 19
SDA rise time tR 300 ns Fast mode, VCC = 1.7V to 5.5V; ensured by characterization only (note 1) 19
SDA(Out) fall time tF 300 ns Fast mode, VCC = 1.7V to 5.5V; ensured by characterization only (note 1) 19
SDA(Out) fall time tF 100 ns High Speed mode, VCC = 1.7V to 5.5V; ensured by characterization only (note 1) 19
Start hold time tHD.STA 600 ns Fast mode, VCC = 1.7V to 5.5V 19
Start hold time tHD.STA 250 ns High Speed mode, VCC = 1.7V to 5.5V 19
Start setup time tSU.STA 600 ns Fast mode, VCC = 1.7V to 5.5V 19
Start setup time tSU.STA 250 ns High Speed mode, VCC = 1.7V to 5.5V 19
Stop setup time tSU.STO 600 ns Fast mode, VCC = 1.7V to 5.5V 19
Stop setup time tSU.STO 250 ns High Speed mode, VCC = 1.7V to 5.5V 19
Bus free time between Stop and next Start tBUF 1300 ns Fast mode, VCC = 1.7V to 5.5V 19
Bus free time between Stop and next Start tBUF 500 ns High Speed mode, VCC = 1.7V to 5.5V 19
Data in hold time tHD.DI 0 ns Fast mode, VCC = 1.7V to 5.5V 19
Data in setup time tSU.DAT 100 ns Fast mode, VCC = 1.7V to 5.5V 19
Data in setup time tSU.DAT 50 ns High Speed mode, VCC = 1.7V to 5.5V 19
Data out hold time tHD.DAT 50 ns Fast mode, VCC = 1.7V to 5.5V 19
SCL low to data out valid tAA 100 900 ns Fast mode, VCC = 1.7V to 5.5V 19
SCL low to data out valid tAA 50 500 ns High Speed mode, VCC = 1.7V to 5.5V 19
WP pin setup time tSU.WP 1200 ns Fast mode, VCC = 1.7V to 5.5V 19
WP pin setup time tSU.WP 600 ns High Speed mode, VCC = 1.7V to 5.5V 19
WP pin hold time tHD.WP 1200 ns Fast mode, VCC = 1.7V to 5.5V 19
WP pin hold time tHD.WP 600 ns High Speed mode, VCC = 1.7V to 5.5V 19
Write cycle time tWR 5 ms Fast mode, VCC = 1.7V to 5.5V 19
Noise suppression time tI 50 ns Fast mode, VCC = 1.7V to 5.5V 19
Power-on reset time tPOR 10 ms 6
Power-on reset voltage VPOR 1.5 V 6
Brown-out reset voltage VBOR 0.8 V 6
Time from power-on to first command tINIT 10 ms 6
Warm power cycle off time tPOFF 1 ms 6
Input/output capacitance (SDA) CI/O 8 pF VI/O = 0V; TA = +25°C, fC = 1MHz 20
Other pins input capacitance CIN 6 pF VIN = 0V; TA = +25°C, fC = 1MHz 20
Data retention DR 200 year TA = +25°C 20

CAD (KiCad official)

  • Symbol: HG24C04CN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: hg24c04cn-etched.step / hg24c04cn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hg24c04cn.step / hg24c04cn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (27 pp, sha256 8bd31d1acd5458af, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF