main
Ray
hg24c04cm5: laser-etched CAD + chip hero (factory 2.0.0 backfill)
c5cae47
HG24C04CM5
HGSEMI · EEPROM · SOT-23-5
HG24C04CM5 from HGSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial Clock input. Provides the clock to the device and controls flow of data. Command and input data on SDA are latched on the rising edge of SCL; output data on SDA is clocked out on the falling edge. Schmitt-triggered with integrated spike-suppression filter. |
| 2 | GND | power_in | Ground reference for the power supply. Should be connected to system ground. |
| 3 | SDA | bidirectional | Serial Data. Open-drain bidirectional I/O used to serially transfer data to and from the device; requires an external pull-up resistor. Schmitt-triggered with integrated spike-suppression filter. |
| 4 | VCC | power_in | Device Power Supply. Operating range 1.7V to 5.5V. Operations at invalid VCC voltages may produce spurious results. |
| 5 | WP | input | Write Protection input. Tie to VCC to write-protect the entire memory array (device becomes read-only); tie to GND to enable write operations. If left floating, WP is internally pulled down to GND. When WP is driven high, device/word address bytes are acknowledged but data bytes are not. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-23-5 |
| Category | Memory |
| Pins | 5 |
Ordering variants
HG24C04CM5/TRHG24C04CM5M/TRHG24C04CM5MM/TRHG24C04CM5MT/TRHG24C04CM5DQ/TRHG24C04CM5N
CAD (KiCad official)
- Symbol:
HG24C04CM5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
hg24c04cm5-etched.step/hg24c04cm5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg24c04cm5.step/hg24c04cm5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (None pp, sha256
8ba672f7961c3a84, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG24C04CM5
**HGSEMI** · EEPROM · SOT-23-5
HG24C04CM5 from HGSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial Clock input. Provides the clock to the device and controls flow of data. Command and input data on SDA are latched on the rising edge of SCL; output data on SDA is clocked out on the falling edge. Schmitt-triggered with integrated spike-suppression filter. |
| 2 | GND | power_in | Ground reference for the power supply. Should be connected to system ground. |
| 3 | SDA | bidirectional | Serial Data. Open-drain bidirectional I/O used to serially transfer data to and from the device; requires an external pull-up resistor. Schmitt-triggered with integrated spike-suppression filter. |
| 4 | VCC | power_in | Device Power Supply. Operating range 1.7V to 5.5V. Operations at invalid VCC voltages may produce spurious results. |
| 5 | WP | input | Write Protection input. Tie to VCC to write-protect the entire memory array (device becomes read-only); tie to GND to enable write operations. If left floating, WP is internally pulled down to GND. When WP is driven high, device/word address bytes are acknowledged but data bytes are not. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-23-5 |
| Category | Memory |
| Pins | 5 |
## Ordering variants
- `HG24C04CM5/TR`
- `HG24C04CM5M/TR`
- `HG24C04CM5MM/TR`
- `HG24C04CM5MT/TR`
- `HG24C04CM5DQ/TR`
- `HG24C04CM5N`
## CAD (KiCad official)
- Symbol: `HG24C04CM5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `hg24c04cm5-etched.step` / `hg24c04cm5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg24c04cm5.step` / `hg24c04cm5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg24c04cm5-datasheet.pdf) (None pp, sha256 `8ba672f7961c3a84`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg24c04cm5-datasheet.pdf)