← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# HG24C02MM++**HGSEMI** · EEPROM · MSOP-8++HG24C02MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | E0 | input | Hardware slave-address bit 0. Tie to VCC or VSS to set the least-significant device-address bit; internally pulled down to VSS if left floating so a total of up to 8 devices can share the bus. |+| 2 | E1 | input | Hardware slave-address bit 1. Tie to VCC or VSS to set the middle device-address bit; internally pulled down to VSS if left floating. |+| 3 | E2 | input | Hardware slave-address bit 2. Tie to VCC or VSS to set the most-significant device-address bit; internally pulled down to VSS if left floating. |+| 4 | VSS | power_in | Ground reference for the VCC supply. |+| 5 | SDA | bidirectional | I2C serial data. Open-drain bidirectional line for serial data transfer; requires an external pull-up resistor to VCC and may be wire-OR'ed with other open-drain devices on the bus. |+| 6 | SCL | input | I2C serial clock input. Positive edge clocks data into the device; negative edge clocks data out. Supports 100 kHz, 400 kHz, and 1 MHz modes. |+| 7 | WCB | input | Write control (active-low enable). When tied to VCC, all writes to the memory array are inhibited; when tied to VSS, normal write operation is permitted. Internally pulled down to VSS if left floating. |+| 8 | VCC | power_in | Positive supply voltage, 1.7 V to 5.5 V (absolute max 6.5 V). Read ICC typ 0.2 mA @ 400 kHz; write ICC typ 0.8 mA @ 400 kHz; standby ~1 uA @ 3.3 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HGSEMI |+| Package | MSOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `HG24C02MM/TR`+- `HG24C02MMHG24C02N`+- `HG24C02MMHG24C02M/TR`+- `HG24C02MMHG24C02M-4K/TR`+- `HG24C02MMHG24C02MT/TR`+- `HG24C02MMHG24C02DQ3/TR`+- `HG24C02MMHG24C02DQ2/TR`+- `HG24C02MMHG24C02M5/TR`++## CAD (KiCad official)++- Symbol: `HG24C02MM`+- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`+- 3D model: MSOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HGSEMI datasheet](docs/hg24c02mm-datasheet.pdf) (18 pp, sha256 `ac9e22c1abbbd678`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hg24c02mm-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "hg24c02mm",+ "version": "0.1.0",+ "type": "component",+ "description": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "hg24c02mm"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "hg24c02mm.kicad_sym",+ "hg24c02mm.kicad_mod",+ "hg24c02mm.glb",+ "hg24c02mm.step",+ "hg24c02mm.lbr",+ "docs/hero.png",+ "docs/hg24c02mm-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}