main
History Download
Ray Publish 0.1.0 5200c41

HG232EIN

HGSEMI · RS232 ICs · DIP-16

HG232EIN from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the external capacitor for the positive voltage multiplier (charge pump).
2 V+ power_out Positive voltage multiplier output; recommended V+ is at least 5.0 V and the absolute maximum is 14 V.
3 C1- passive Negative terminal of the external capacitor for the positive voltage multiplier (charge pump).
4 C2+ passive Positive terminal of the external capacitor for the negative voltage multiplier (charge pump).
5 C2- passive Negative terminal of the external capacitor for the negative voltage multiplier (charge pump).
6 V- power_out Negative voltage multiplier output; recommended V- is at most -5.0 V and the absolute minimum is -14 V.
7 T2OUT output Transmitter 2 output at RS-232 levels; short-circuit output current is specified as continuous in the absolute maximum ratings.
8 R2IN input Receiver 2 input at RS-232 levels; receiver input voltage range is -30 V to 30 V.
9 R2OUT output Receiver 2 output at TTL/CMOS levels.
10 T2IN input Transmitter 2 input at TTL/CMOS levels; transmitter input voltage range is 0 V to VCC.
11 T1IN input Transmitter 1 input at TTL/CMOS levels; transmitter input voltage range is 0 V to VCC.
12 R1OUT output Receiver 1 output at TTL/CMOS levels.
13 R1IN input Receiver 1 input at RS-232 levels; receiver input voltage range is -30 V to 30 V.
14 T1OUT output Transmitter 1 output at RS-232 levels; short-circuit output current is specified as continuous in the absolute maximum ratings.
15 GND power_in Common ground reference pin (the datasheet table labels it 'Common output').
16 VCC power_in Supply pin; recommended supply voltage is 4.5 V to 5.5 V and the absolute maximum is 6.0 V.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package DIP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5.5 V 4
Transmitter output high voltage V+ 5 V 4
Transmitter output low voltage V- -5 V 4
Transmitter input voltage VTIN 0 V 4
Receiver input voltage VRIN -30 30 V 4
Transmitter short circuit output current ISC -60 60 mA 4
Ambient temperature Ta -40 85 ℃ 4
Supply voltage VCC -0.3 6 V 3
Transmitter high output voltage V+ 14 V 3
Transmitter low output voltage V- -14 -0.3 V 3
Transmitter input voltage VTIN -0.3 V 3
Receiver input voltage VRIN -30 30 V 3
Dissipated power PD 842 mW DIP package 3
Ambient temperature Ta -60 150 ℃ 3
Lead temperature TL 245 ℃ Soldering, 10 seconds 3
Consumption current static ICC 14 mA Ta -40 to 85℃; VCC =5.0V, VIL = 0V 5
Hysteresis voltage Vh 0.2 1 V Ta -40 to 85℃; VCC =5.0V 5
On (operation) voltage VOn 2.3 V Ta -40 to 85℃; VO ≤ 0.1 V, IOL ≤ 20 uA 5
Off (dropout) voltage Voff 0.9 V Ta -40 to 85℃; VO ≥ VCC -0.1V, IOH ≤ -20 uA 5
Output low voltage VOL 0.4 V Ta -40 to 85℃; IOL = 3.2 mA, VCC = 4.5 V, VIH = 2.4 V 5
Output high voltage VOH 3.5 V Ta -40 to 85℃; IOH = -1.0 mA, VCC = 4.5 V, VIL = 0.8 V 5
Input resistance RI 3 7 kOhm Ta -40 to 85℃; VCC = 5.0 V 5
Output low voltage (transmitter) VOL -5 V Ta -40 to 85℃; VCC = 4.5 V, VIH = 2.0 V, RL = 3.0 kOhm 5
Output high voltage (transmitter) VOH 5 V Ta -40 to 85℃; VCC = 4.5 V, VIL = 0.8 V, RL = 3.0 kOhm 5
Input low current IIL -10 uA Ta -40 to 85℃; VCC =5.5 V, VIL = 0 V 5
Input high current IIH 10 uA Ta -40 to 85℃; VCC =5.5 V, VIH = VCC 5
Speed of output front change SR 2.7 27 V/µs Ta -40 to 85℃; VCC =5.0 V, CL =50-1000 pF, RL = 3.0-7.0 kOhm 5
Output resistance RO 300 Ohm Ta -40 to 85℃; VCC = V+ = V- = 0 V, VO = ±2 V 5
Short circuit output current ISC -60 60 mA Ta -40 to 85℃; VCC =5.5 V, VO = 0 V, VI = VCC, VI = 0 V 5
Speed of information transmission ST 120 kbps Ta -40 to 85℃; VCC =4.5 V, CL = 1000 pF, RL = 3.0 kOhm, tW = 7us (for extreme tW = 8us) 5
Signal propagation delay time when switching on (off) tPHLR (tPLHR) 10 us Ta -40 to 85℃; VCC = 4.5 V, CL = 150 pF, VIL = 0 V, VIH = 3.0 V, tLH = tHL ≤ 10 ns 6
Signal propagation delay time when switching on (off) tphlt (tPLHT) 6 us Ta -40 to 85℃; VCC = 4.5 V, CL = 2500 pF, VIL = 0 V, VIH = 3.0 V, RL = 3 kOhm, tLH = tHL ≤ 10 ns 6
Input capacitance CIN 9 pF VCC = 5.0 6
Dynamic capacitance CPD 90 pF 6

CAD (KiCad official)

  • Symbol: HG232EIN
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: hg232ein-etched.step / hg232ein-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hg232ein.step / hg232ein.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (11 pp, sha256 022e2bb1d4cd6e57, retrieved 2026-10-14, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF