component
HG1501S-5.0
Public Made by Adomby adom
HGSEMI DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HG1501S-5.0
HGSEMI · DC-DC Converters · TO-263-5
HG1501S-5.0 from HGSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input requiring a 4.5V~40V DC source (60V for HV types), with a large capacitor placed between this pin and ground to suppress supply noise. |
| 2 | OUTPUT | output | Power switch output and switching node that supplies the output load. |
| 3 | GND | power_in | Ground pin, which in layout should sit on the output capacitor ground path outside the Schottky diode loop to keep switching current spikes from adding noise. |
| 4 | FEEDBACK | input | Voltage feedback pin that monitors the output through an external resistor divider, with a feedback threshold voltage of 1.23V. |
| 5 | ON_OFF | input | Enable pin where a low level turns the chip on and a high level turns it off, defaulting to low when floating (threshold high 1.4V, low 0.8V). |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-263-5 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage HG1501-5.0 | VOUT | 4.8 | 5 | 5.2 | V | VIN=7V |
4 |
| Oscillator frequency | FOSC | 127 | 150 | 173 | KHz | VIN=12V, IOUT=500mA, Ta=25°C | 5 |
| Current limit | IL | 3.6 | 4.8 | 6.9 | A | VFB=0 | 5 |
| Input operating voltage | VIN | 4.5 | 40 | V | HG1501 | 5 | |
| Standby current | ISTBY | 80 | 200 | uA | VON_OFF=5V | 5 | |
| Quiescent operating current | IQ | 2 | 10 | mA | VON_OFF=0V, VFB=VIN | 5 | |
| Saturation voltage | VCE | 1.3 | 1.5 | V | VFB=0V, IOUT=3A | 5 | |
| ON_OFF leakage high | IH | 5 | 30 | A | VON_OFF=2.5V (OFF) | 5 | |
| ON_OFF leakage low | IL | 0.2 | 10 | A | VON_OFF=0.5V (ON) | 5 | |
| Input voltage recommended | VIN | 5 | 40 | V | HG1501 | 3 | |
| Junction temperature recommended | TJ | -40 | 125 | °C | 3 | ||
| Input operating voltage abs max | VIN | -0.3 | 45 | V | HG1501 | 3 | |
| Feedback pin voltage | VFB | -0.3 | V | -0.3 to VIN | 3 | ||
| ON_OFF pin voltage | VON_OFF | -0.3 | V | -0.3 to VIN | 3 | ||
| Output pin voltage | VOUT_PUT | -0.3 | V | -0.3 to VIN | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 3 | ||
| Lead temperature | TLEAD | 245 | °C | 3 | |||
| ESD (HBM) | ESD | 2000 | V | Human body model | 3 | ||
| ON_OFF threshold high (control off) | VON_OFF | 1.4 | V | high (control off) | 5 | ||
| ON_OFF threshold low (control on) | VON_OFF | 0.8 | V | low (control on) | 5 | ||
| Efficiency | η | 80 | % | VIN=12V, VOUT=5V, ILOAD=3A | 4 | ||
| Maximum duty cycle | DMAX | 100 | % | VFB=0V | 5 | ||
| Thermal resistance junction-ambient | RθJA | 50 | °C/W | No heatsink, TO220/TO263 package | 5 |
CAD (KiCad official)
- Symbol:
HG1501S-5.0 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
hg1501s-5-0-etched.step/hg1501s-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg1501s-5-0.step/hg1501s-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (10 pp, sha256
9ba9664e20418e04, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG1501S-5.0
**HGSEMI** · DC-DC Converters · TO-263-5
HG1501S-5.0 from HGSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input requiring a 4.5V~40V DC source (60V for HV types), with a large capacitor placed between this pin and ground to suppress supply noise. |
| 2 | OUTPUT | output | Power switch output and switching node that supplies the output load. |
| 3 | GND | power_in | Ground pin, which in layout should sit on the output capacitor ground path outside the Schottky diode loop to keep switching current spikes from adding noise. |
| 4 | FEEDBACK | input | Voltage feedback pin that monitors the output through an external resistor divider, with a feedback threshold voltage of 1.23V. |
| 5 | ON_OFF | input | Enable pin where a low level turns the chip on and a high level turns it off, defaulting to low when floating (threshold high 1.4V, low 0.8V). |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-263-5 |
| Category | Power Management ICs |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage HG1501-5.0 | VOUT | 4.8 | 5 | 5.2 | V | VIN=7V~40V, ILOAD=0.2A~3A | 4 |
| Oscillator frequency | FOSC | 127 | 150 | 173 | KHz | VIN=12V, IOUT=500mA, Ta=25°C | 5 |
| Current limit | IL | 3.6 | 4.8 | 6.9 | A | VFB=0 | 5 |
| Input operating voltage | VIN | 4.5 | | 40 | V | HG1501 | 5 |
| Standby current | ISTBY | | 80 | 200 | uA | VON_OFF=5V | 5 |
| Quiescent operating current | IQ | | 2 | 10 | mA | VON_OFF=0V, VFB=VIN | 5 |
| Saturation voltage | VCE | | 1.3 | 1.5 | V | VFB=0V, IOUT=3A | 5 |
| ON_OFF leakage high | IH | | 5 | 30 | A | VON_OFF=2.5V (OFF) | 5 |
| ON_OFF leakage low | IL | | 0.2 | 10 | A | VON_OFF=0.5V (ON) | 5 |
| Input voltage recommended | VIN | 5 | | 40 | V | HG1501 | 3 |
| Junction temperature recommended | TJ | -40 | | 125 | °C | | 3 |
| Input operating voltage abs max | VIN | -0.3 | | 45 | V | HG1501 | 3 |
| Feedback pin voltage | VFB | -0.3 | | | V | -0.3 to VIN | 3 |
| ON_OFF pin voltage | VON_OFF | -0.3 | | | V | -0.3 to VIN | 3 |
| Output pin voltage | VOUT_PUT | -0.3 | | | V | -0.3 to VIN | 3 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 3 |
| Storage temperature | TSTG | -65 | | 150 | °C | | 3 |
| Lead temperature | TLEAD | | | 245 | °C | | 3 |
| ESD (HBM) | ESD | | | 2000 | V | Human body model | 3 |
| ON_OFF threshold high (control off) | VON_OFF | | 1.4 | | V | high (control off) | 5 |
| ON_OFF threshold low (control on) | VON_OFF | | 0.8 | | V | low (control on) | 5 |
| Efficiency | η | | 80 | | % | VIN=12V, VOUT=5V, ILOAD=3A | 4 |
| Maximum duty cycle | DMAX | | 100 | | % | VFB=0V | 5 |
| Thermal resistance junction-ambient | RθJA | | 50 | | °C/W | No heatsink, TO220/TO263 package | 5 |
## CAD (KiCad official)
- Symbol: `HG1501S-5.0`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files: `hg1501s-5-0-etched.step` / `hg1501s-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg1501s-5-0.step` / `hg1501s-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg1501s-5-0-datasheet.pdf) (10 pp, sha256 `9ba9664e20418e04`, retrieved 2026-10-22, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg1501s-5-0-datasheet.pdf)