main
Ray
Publish 0.1.0
c397c4b
HG1302ZMM
HGSEMI · Real-time Clocks (RTC) · MSOP-8
HG1302ZMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC2 | power_in | Primary power supply pin (main supply in dual-supply systems), operating range 2.0V to 5.5V. |
| 2 | X1 | passive | Connection for 32.768kHz crystal (load capacitance 6pF). |
| 3 | X2 | passive | Connection for 32.768kHz crystal (load capacitance 6pF). |
| 4 | GND | power_in | Ground. |
| 5 | RST | input | Reset input driven high to start data transfers; low aborts transfers and places I/O in high impedance, and must be logic 0 until VCC reaches 2.5V at power-up. |
| 6 | I/O | bidirectional | Serial data input/output line, high impedance when RST is low. |
| 7 | SCLK | input | Serial clock input; SCLK must be logic 0 when RST is driven to logic 1. |
| 8 | VCC1 | power_in | Backup power supply pin for low-power battery backup, operating range 2.0V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | RTC/Clock Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Pin voltage to GND | VP | -0.5 | 7 | V | 3 | ||
| Operating temperature (HG1302Z) | TA | -40 | 85 | °C | HG1302Z | 3 | |
| Storage temperature | TS | -55 | 125 | °C | 3 | ||
| Soldering temperature | TH | 260 | °C | 10 s | 3 | ||
| Supply voltage | VCC1, VCC2 | 2 | 5.5 | V | TA=0℃~70℃ | 3 | |
| Logic 1 input voltage | VIH | 2 | V | max VCC+0.3 | 3 | ||
| Logic 0 input voltage | VIL | -0.3 | 0.3 | V | VCC=2.0V | 3 | |
| Logic 0 input voltage | VIL | -0.3 | 0.8 | V | VCC=5V | 3 | |
| Input capacitance | CI | 10 | pF | TA=25℃ | 3 | ||
| I/O capacitance | CI/O | 15 | pF | TA=25℃ | 3 | ||
| Crystal oscillator capacitance | CX | 6 | pF | TA=25℃ | 3 | ||
| Input current | ILI | 500 | μA | 3 | |||
| I/O leakage current | ILO | 500 | μA | 3 | |||
| Logic 1 output voltage | VOH | 1.6 | V | VCC=2.5V | 3 | ||
| Logic 1 output voltage | VOH | 2.4 | V | VCC=5V | 3 | ||
| Logic 0 output voltage | VOL | 0.4 | V | VCC=2.5V | 3 | ||
| Active supply current VCC1 | ICC1A | 0.4 | mA | VCC1=2.5V | 3 | ||
| Active supply current VCC1 | ICC1A | 1.2 | mA | VCC1=5V | 3 | ||
| Timekeeping current VCC1 | ICC1T | 0.3 | μA | VCC1=2.5V | 3 | ||
| Timekeeping current VCC1 | ICC1T | 1 | μA | VCC1=5V | 3 | ||
| Standby current VCC1 | ICC1S | 100 | nA | VCC1=2.5V | 4 | ||
| Active supply current VCC2 | ICC2A | 0.425 | mA | VCC2=2.5V | 4 | ||
| Active supply current VCC2 | ICC2A | 1.28 | mA | VCC2=5V | 4 | ||
| Timekeeping current VCC2 | ICC2T | 25.3 | μA | VCC2=2.5V | 4 | ||
| Timekeeping current VCC2 | ICC2T | 81 | μA | VCC2=5V | 4 | ||
| Standby current VCC2 | ICC2S | 25 | μA | VCC2=2.5V | 4 | ||
| Standby current VCC2 | ICC2S | 80 | μA | VCC2=5V | 4 | ||
| CLK to RST hold | tcch | 240 | ns | VCC=2.5V | 4 | ||
| CLK to RST hold | tcch | 60 | ns | VCC=5V | 4 | ||
| RST inactive time | tcwh | 4 | ns | VCC=2.5V | 4 | ||
| RST inactive time | tcwh | 1 | ns | VCC=5V | 4 | ||
| RST to I/O high impedance | tcdz | 280 | ns | VCC=2.5V | 4 | ||
| RST to I/O high impedance | tcdz | 70 | ns | VCC=5V | 4 | ||
| SCLK to I/O high impedance | tccz | 280 | ns | VCC=2.5V | 4 | ||
| SCLK to I/O high impedance | tccz | 70 | ns | VCC=5V | 4 | ||
| Data to CLK setup | tdc | 200 | ns | VCC=2.5V | 4 | ||
| Data to CLK setup | tdc | 50 | ns | VCC=5V | 4 | ||
| CLK to data hold | tcdh | 280 | ns | VCC=2.5V | 4 | ||
| CLK to data hold | tcdh | 70 | ns | VCC=5V | 4 | ||
| CLK to data delay | tcdd | 800 | ns | VCC=2.5V | 4 | ||
| CLK to data delay | tcdd | 200 | ns | VCC=5V | 4 | ||
| CLK low time | tcl | 1000 | ns | VCC=2.5V | 4 | ||
| CLK low time | tcl | 250 | ns | VCC=5V | 4 | ||
| CLK high time | tch | 1000 | ns | VCC=2.5V | 4 | ||
| CLK high time | tch | 250 | ns | VCC=5V | 4 | ||
| CLK frequency | tclk | 0.5 | MHz | VCC=2.5V | 4 | ||
| CLK frequency | tclk | 0 | 2 | MHz | VCC=5V, printed DC to 2.0 | 4 | |
| CLK rise and fall time | tr, tf | 2000 | ns | VCC=2.5V | 4 | ||
| CLK rise and fall time | tr, tf | 500 | ns | VCC=5V | 4 | ||
| RST to CLK setup | tCC | 4 | µs | VCC=2.5V | 4 | ||
| RST to CLK setup | tCC | 1 | µs | VCC=5V | 4 | ||
| Trickle charge resistor R1 | R1 | 2 | kΩ | 4 | |||
| Trickle charge resistor R2 | R2 | 4 | kΩ | 4 | |||
| Trickle charge resistor R3 | R3 | 8 | kΩ | 4 | |||
| Trickle charge diode drop | VTD | 0.7 | V | 4 |
CAD (KiCad official)
- Symbol:
HG1302ZMM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
hg1302zmm-etched.step/hg1302zmm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg1302zmm.step/hg1302zmm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (15 pp, sha256
adffc1b2ce4a936e, retrieved 2026-10-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG1302ZMM
**HGSEMI** · Real-time Clocks (RTC) · MSOP-8
HG1302ZMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC2 | power_in | Primary power supply pin (main supply in dual-supply systems), operating range 2.0V to 5.5V. |
| 2 | X1 | passive | Connection for 32.768kHz crystal (load capacitance 6pF). |
| 3 | X2 | passive | Connection for 32.768kHz crystal (load capacitance 6pF). |
| 4 | GND | power_in | Ground. |
| 5 | RST | input | Reset input driven high to start data transfers; low aborts transfers and places I/O in high impedance, and must be logic 0 until VCC reaches 2.5V at power-up. |
| 6 | I/O | bidirectional | Serial data input/output line, high impedance when RST is low. |
| 7 | SCLK | input | Serial clock input; SCLK must be logic 0 when RST is driven to logic 1. |
| 8 | VCC1 | power_in | Backup power supply pin for low-power battery backup, operating range 2.0V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | RTC/Clock Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Pin voltage to GND | VP | -0.5 | | 7 | V | | 3 |
| Operating temperature (HG1302Z) | TA | -40 | | 85 | °C | HG1302Z | 3 |
| Storage temperature | TS | -55 | | 125 | °C | | 3 |
| Soldering temperature | TH | | | 260 | °C | 10 s | 3 |
| Supply voltage | VCC1, VCC2 | 2 | | 5.5 | V | TA=0℃~70℃ | 3 |
| Logic 1 input voltage | VIH | 2 | | | V | max VCC+0.3 | 3 |
| Logic 0 input voltage | VIL | -0.3 | | 0.3 | V | VCC=2.0V | 3 |
| Logic 0 input voltage | VIL | -0.3 | | 0.8 | V | VCC=5V | 3 |
| Input capacitance | CI | | | 10 | pF | TA=25℃ | 3 |
| I/O capacitance | CI/O | | | 15 | pF | TA=25℃ | 3 |
| Crystal oscillator capacitance | CX | | 6 | | pF | TA=25℃ | 3 |
| Input current | ILI | | | 500 | μA | | 3 |
| I/O leakage current | ILO | | | 500 | μA | | 3 |
| Logic 1 output voltage | VOH | 1.6 | | | V | VCC=2.5V | 3 |
| Logic 1 output voltage | VOH | 2.4 | | | V | VCC=5V | 3 |
| Logic 0 output voltage | VOL | | | 0.4 | V | VCC=2.5V | 3 |
| Active supply current VCC1 | ICC1A | | | 0.4 | mA | VCC1=2.5V | 3 |
| Active supply current VCC1 | ICC1A | | | 1.2 | mA | VCC1=5V | 3 |
| Timekeeping current VCC1 | ICC1T | | | 0.3 | μA | VCC1=2.5V | 3 |
| Timekeeping current VCC1 | ICC1T | | | 1 | μA | VCC1=5V | 3 |
| Standby current VCC1 | ICC1S | | | 100 | nA | VCC1=2.5V | 4 |
| Active supply current VCC2 | ICC2A | | | 0.425 | mA | VCC2=2.5V | 4 |
| Active supply current VCC2 | ICC2A | | | 1.28 | mA | VCC2=5V | 4 |
| Timekeeping current VCC2 | ICC2T | | | 25.3 | μA | VCC2=2.5V | 4 |
| Timekeeping current VCC2 | ICC2T | | | 81 | μA | VCC2=5V | 4 |
| Standby current VCC2 | ICC2S | | | 25 | μA | VCC2=2.5V | 4 |
| Standby current VCC2 | ICC2S | | | 80 | μA | VCC2=5V | 4 |
| CLK to RST hold | tcch | 240 | | | ns | VCC=2.5V | 4 |
| CLK to RST hold | tcch | 60 | | | ns | VCC=5V | 4 |
| RST inactive time | tcwh | 4 | | | ns | VCC=2.5V | 4 |
| RST inactive time | tcwh | 1 | | | ns | VCC=5V | 4 |
| RST to I/O high impedance | tcdz | | | 280 | ns | VCC=2.5V | 4 |
| RST to I/O high impedance | tcdz | | | 70 | ns | VCC=5V | 4 |
| SCLK to I/O high impedance | tccz | | | 280 | ns | VCC=2.5V | 4 |
| SCLK to I/O high impedance | tccz | | | 70 | ns | VCC=5V | 4 |
| Data to CLK setup | tdc | 200 | | | ns | VCC=2.5V | 4 |
| Data to CLK setup | tdc | 50 | | | ns | VCC=5V | 4 |
| CLK to data hold | tcdh | 280 | | | ns | VCC=2.5V | 4 |
| CLK to data hold | tcdh | 70 | | | ns | VCC=5V | 4 |
| CLK to data delay | tcdd | | | 800 | ns | VCC=2.5V | 4 |
| CLK to data delay | tcdd | | | 200 | ns | VCC=5V | 4 |
| CLK low time | tcl | 1000 | | | ns | VCC=2.5V | 4 |
| CLK low time | tcl | 250 | | | ns | VCC=5V | 4 |
| CLK high time | tch | 1000 | | | ns | VCC=2.5V | 4 |
| CLK high time | tch | 250 | | | ns | VCC=5V | 4 |
| CLK frequency | tclk | | | 0.5 | MHz | VCC=2.5V | 4 |
| CLK frequency | tclk | 0 | | 2 | MHz | VCC=5V, printed DC to 2.0 | 4 |
| CLK rise and fall time | tr, tf | | | 2000 | ns | VCC=2.5V | 4 |
| CLK rise and fall time | tr, tf | | | 500 | ns | VCC=5V | 4 |
| RST to CLK setup | tCC | 4 | | | µs | VCC=2.5V | 4 |
| RST to CLK setup | tCC | 1 | | | µs | VCC=5V | 4 |
| Trickle charge resistor R1 | R1 | | 2 | | kΩ | | 4 |
| Trickle charge resistor R2 | R2 | | 4 | | kΩ | | 4 |
| Trickle charge resistor R3 | R3 | | 8 | | kΩ | | 4 |
| Trickle charge diode drop | VTD | | 0.7 | | V | | 4 |
## CAD (KiCad official)
- Symbol: `HG1302ZMM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `hg1302zmm-etched.step` / `hg1302zmm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg1302zmm.step` / `hg1302zmm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg1302zmm-datasheet.pdf) (15 pp, sha256 `adffc1b2ce4a936e`, retrieved 2026-10-26, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg1302zmm-datasheet.pdf)