main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs hg1302mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers hg1302mm: viewers · Ray
hg1302mm-etched.fit.json hg1302mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hg1302mm-etched.glb hg1302mm: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
hg1302mm-etched.step hg1302mm: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
hg1302mm-hero.glb hg1302mm: hero from the plain model · Ray
hg1302mm-hero.overlay.json hg1302mm: hero from the plain model · Ray
hg1302mm.glb Publish 0.1.0 · Ray
hg1302mm.kicad_mod Publish 0.1.0 · Ray
hg1302mm.kicad_sym Publish 0.1.0 · Ray
hg1302mm.lbr Publish 0.1.0 · Ray
hg1302mm.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/hg1302mm · Ray

HG1302MM

HGSEMI · Real Time Clocks · MSOP-8

HG1302MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC2 power_in Main power supply for clock operation and data processing, operates from 2.0V to 5.5V.
2 X1 passive 32.768kHz crystal oscillator input terminal with recommended load capacitance of 6pF.
3 X2 passive 32.768kHz crystal oscillator input terminal with recommended load capacitance of 6pF.
4 GND power_in Ground reference for the device.
5 RST input Reset input, active high; initializes data transfer and must be held low at power-up until VCC ≥ 2.5V; SCLK must be low when driving RST high.
6 I/O bidirectional Serial data input/output for reading and writing clock and RAM data; enters high-impedance state when RST is low or on each SCLK rising edge during output.
7 SCLK input Serial clock input for synchronizing data transfer; data is latched on rising edge and output on falling edge; must be low when RST transitions to high.
8 VCC1 power_in Backup power supply for low-power operation and time retention; supplies device when main power is absent or lower than VCC2.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package MSOP-8
Category Clock/Timing
Pins 8

CAD (KiCad official)

  • Symbol: HG1302MM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: hg1302mm-etched.step / hg1302mm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hg1302mm.step / hg1302mm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (14 pp, sha256 313dc8a655711ee6, retrieved 2026-09-21, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF