main
Ray
hg1118m-3315: laser-etched CAD + chip hero (factory 2.0.0 backfill)
c99d250
HG1118M-3315
HGSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · ESOP-8
HG1118M-3315 from HGSEMI, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND/ADJ1 | power_in | Ground / adjust pin for regulator 1. On fixed-voltage versions (3.3V here) this pin is the regulator ground reference. On adjustable variants it becomes the ADJ feedback node (VREF = 1.25V). |
| 2 | VIN1 | power_in | Input supply for regulator 1 (3.3V output). Recommended operating input 12V, absolute maximum 15V. Requires input bypass capacitor (typ. 10 uF). |
| 3 | GND/ADJ2 | power_in | Ground / adjust pin for regulator 2. On fixed-voltage versions (1.5V here) this is the regulator ground reference. On adjustable variants it becomes the ADJ feedback node (VREF = 1.25V). |
| 4 | VIN2 | power_in | Input supply for regulator 2 (1.5V output). Recommended operating input 12V, absolute maximum 15V. Requires input bypass capacitor (typ. 10 uF). |
| 5 | VOUT2 | power_out | Regulated output of regulator 2 (1.5V nominal for the -3315 variant). Tied together with pin 6 on the package. Requires output capacitor (>=22 uF for adjustable, smaller acceptable for fixed). |
| 6 | VOUT2 | power_out | Regulated output of regulator 2 (1.5V nominal for the -3315 variant). Tied together with pin 5 on the package. |
| 7 | VOUT1 | power_out | Regulated output of regulator 1 (3.3V nominal for the -3315 variant). Tied together with pin 8 on the package. Requires output capacitor (>=22 uF for adjustable, smaller acceptable for fixed). |
| 8 | VOUT1 | power_out | Regulated output of regulator 1 (3.3V nominal for the -3315 variant). Tied together with pin 7 on the package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HG1118M-3315
CAD (KiCad official)
- Symbol:
HG1118M-3315 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
hg1118m-3315-etched.step/hg1118m-3315-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg1118m-3315.step/hg1118m-3315.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (10 pp, sha256
b96732d7b751a79e, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG1118M-3315
**HGSEMI** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · ESOP-8
HG1118M-3315 from HGSEMI, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND/ADJ1 | power_in | Ground / adjust pin for regulator 1. On fixed-voltage versions (3.3V here) this pin is the regulator ground reference. On adjustable variants it becomes the ADJ feedback node (VREF = 1.25V). |
| 2 | VIN1 | power_in | Input supply for regulator 1 (3.3V output). Recommended operating input 12V, absolute maximum 15V. Requires input bypass capacitor (typ. 10 uF). |
| 3 | GND/ADJ2 | power_in | Ground / adjust pin for regulator 2. On fixed-voltage versions (1.5V here) this is the regulator ground reference. On adjustable variants it becomes the ADJ feedback node (VREF = 1.25V). |
| 4 | VIN2 | power_in | Input supply for regulator 2 (1.5V output). Recommended operating input 12V, absolute maximum 15V. Requires input bypass capacitor (typ. 10 uF). |
| 5 | VOUT2 | power_out | Regulated output of regulator 2 (1.5V nominal for the -3315 variant). Tied together with pin 6 on the package. Requires output capacitor (>=22 uF for adjustable, smaller acceptable for fixed). |
| 6 | VOUT2 | power_out | Regulated output of regulator 2 (1.5V nominal for the -3315 variant). Tied together with pin 5 on the package. |
| 7 | VOUT1 | power_out | Regulated output of regulator 1 (3.3V nominal for the -3315 variant). Tied together with pin 8 on the package. Requires output capacitor (>=22 uF for adjustable, smaller acceptable for fixed). |
| 8 | VOUT1 | power_out | Regulated output of regulator 1 (3.3V nominal for the -3315 variant). Tied together with pin 7 on the package. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HG1118M-3315`
## CAD (KiCad official)
- Symbol: `HG1118M-3315`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `hg1118m-3315-etched.step` / `hg1118m-3315-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg1118m-3315.step` / `hg1118m-3315.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg1118m-3315-datasheet.pdf) (10 pp, sha256 `b96732d7b751a79e`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg1118m-3315-datasheet.pdf)