Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HFC0500GS-Z

Monolithic Power Systems · AC-DC Controllers & Regulators · SOIC-7

HFC0500GS-Z from Monolithic Power Systems, in a SOIC-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TIMER bidirectional Timer pin combines soft start, frequency jittering and the timer functions for OLP, brown-out protection and X-cap discharge, and the IC can be latched off by pulling this pin low.
2 FB input Feedback pin is used with a pull-down opto-coupler to control output regulation.
3 CS input Current sense pin senses the primary side current for current-mode operation and provides a means for over power compensation adjustment.
4 GND power_in IC ground pin.
5 DRV output Drive signal output pin; the datasheet gives driver high level 10.3 V at VCC=12 V and clamp level 13.4 V at VCC=24 V with 1 nF load.
6 VCC power_in Power supply pin; recommended operating VCC range is 9 V to 24 V.
8 HV power_in High-voltage current source pin that includes brown-out and X-cap discharge functions, with absolute maximum rating -0.7 V to 700 V.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOIC-7
Category Power Management
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
HV pin voltage -0.7 700 V 4
VCC, DRV to GND voltage -0.3 30 V 4
FB, TIMER, CS to GND voltage -0.3 7 V 4
Continuous Power Dissipation 1.3 W TA = +25°C 4
Junction Temperature 150 °C 4
Lead Temperature 260 °C 4
Storage Temperature -60 150 °C 4
ESD Capability Human Body Model 4 kV Human Body Model (except HV and DRV) 4
ESD Capability Human Body Model (DRV) 3.5 kV Human Body Model (DRV) 4
ESD Capability Human Body Model (HV) 1.8 kV Human Body Model (HV) 4
ESD capability Machine Mode 400 V Machine Mode 4
Operating Junction Temperature TJ -40 125 °C 4
Operating VCC range VCC 9 24 V 4
Thermal Resistance Junction-to-Ambient SOIC8-7A θJA 96 °C/W Measured on JESD51-7, 4-layer PCB 4
Thermal Resistance Junction-to-Case SOIC8-7A θJC 45 °C/W Measured on JESD51-7, 4-layer PCB 4
Supply Current from HV IHV_400 1.5 2.8 5 mA VCC= 12V, VHV=400V 5
Supply Current from HV IHV_120 1.5 2.7 5 mA VCC= 12V, VHV=120V 5
Leakage Current from HV ILK_400 1 16 25 μA VCC increases to 18V then decreases to 14V, VHV=400V 5
Leakage Current from HV ILK_200 1 13 22 μA VCC increases to 18V then decreases to 14V, VHV=200V 5
Break Down Voltage VBR 700 790 V TJ = 25oC 5
VCC Increasing Level at which the Current Source Turns-Off VCCOFF 12.5 15.5 18 V 5
VCC Decreasing Level above which Soft Start Takes Place if HV>HVON VCCSS 10.5 12 13 V 5
VCC Hysteresis for Brown-in Detection VCCOFF - VCCSS 1.35 3.5 V 5
VCC Decreasing Level at which the Current Source Turns-On VCCON 7.3 8.5 9.6 V 5
VCC UVLO Hysteresis VCCOFF - VCCON 5 7 V 5
VCC Re-charge Level when Protection Takes Place VCCPRO 4.9 5.5 6.2 V 5
VCC Decreasing Level at which the Latch off Phase Ends VCCLATCH 2.5 V 5
Internal IC Consumption ICC 1.1 1.8 2.7 mA VFB=2V,CL=1nF, VCC=12V 5
Internal IC Consumption, Latch off Phase ICCLATCH 520 700 880 μA VCC=VCCOFF-1V, TJ=25℃ 5
Voltage on the VCC above which the Controller Latches off (OVP) VOVP 24 26.5 28.5 V 5
Blanking Duration on the OVP Comparator TOVP 60 μs 5

CAD (KiCad official)

  • Symbol: HFC0500GS-Z
  • Footprint: Package_SO:SOIC-8-N7_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-7 (KiCad packages3D, STEP)
  • 3D model files: hfc0500gs-z-etched.step / hfc0500gs-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hfc0500gs-z.step / hfc0500gs-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (29 pp, sha256 2afea3a8b9fdb684, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF