Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
HF920GSE-Z
Monolithic Power Systems · AC-DC Controllers & Regulators · SOIC-7
HF920GSE-Z from Monolithic Power Systems, in a SOIC-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | IC power supply; connect an electrolytic capacitor and a small ceramic decoupling capacitor to VCC (recommended 10V to 24V, absolute max 30V). |
| 2 | FSET | passive | Switching frequency setting; a resistor from FSET to GND sets the frequency up to 150kHz, and a typical 1nF capacitor in parallel with it enables frequency-doubling mode. |
| 3 | PRO | input | External protection input; when pulled up above VPRO (3.1V typ) it shuts down the IC with 0.2V hysteresis. |
| 4 | FB | input | Feedback input that regulates the output voltage, also used for OLP detection and burst mode control (burst entry 0.5V typ, exit 0.7V typ). |
| 5 | GND | power_in | IC ground. |
| 6 | S | input | Source of the internal MOSFET and input for the primary current-sense signal (max current set point 0.97V typ, SCP at 1.5V typ). |
| 8 | D | passive | Drain of the internal 900V MOSFET and input for the start-up high-voltage current source (absolute max -0.3V to 900V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-7 |
| Category | Power Management |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current from drain | ICharge | 1 | 2 | 3 | mA | VCC = VCCH - 0.1V, VD = 400V | 5 |
| Leakage current from drain (TJ=25°C) | ILeak | 1 | μA | VD = 400V, VGS = 0V, TJ = 25°C | 5 | ||
| Leakage current from drain | ILeak | 10 | μA | VD = 400V, VGS = 0V | 5 | ||
| Breakdown voltage | V(BR)DSS | 900 | V | 5 | |||
| On-state resistance (TJ=25°C) | RDS(ON) | 15 | 18 | Ω | VCC = 10V, ID = 100mA, TJ = 25°C | 5 | |
| On-state resistance (TJ=125°C) | RDS(ON) | 25 | 29 | Ω | VCC = 10V, ID = 100mA, TJ = 125°C | 5 | |
| VCC upper level at which the IC switch turns on | VCCH | 12 | 13 | 14 | V | 5 | |
| VCC lower level at which the IC switch turns off | VCCL | 8.4 | 9 | 9.6 | V | 5 | |
| VCC hysteresis | VCC_HYS | 3 | 4 | 5 | V | 5 | |
| VCC OVP level | VOVP | 24.4 | 25.5 | 26.5 | V | 5 | |
| VCC recharge level after protections | VCCR | 4.8 | 5.5 | 6.2 | V | 5 | |
| Quiescent current during protections | IPro | 300 | μA | VCC = VCCL | 5 | ||
| Quiescent current | IQ | 200 | 300 | μA | VCC = VCCH - 0.1V | 5 | |
| Operation current | ICC | 510 | 610 | μA | VCC =13V, fS = 100kHz | 5 | |
| Operation current | ICC | 300 | 400 | μA | VCC = 13V, FB = 0V | 5 | |
| Internal pull-up voltage | VUP | 4.1 | 4.4 | 4.7 | V | 5 | |
| FB to current-set-point division ratio | Kdiv | 3.4 | 3.7 | 5 | |||
| FB decreasing level at which the regulator enters burst mode | VBURL | 0.4 | 0.5 | 0.6 | V | 5 | |
| FB increasing level at which the regulator leaves burst mode | VBURH | 0.6 | 0.7 | 0.8 | V | 5 | |
| Overload set point | VOLP | 3.3 | 3.65 | 4 | V | 5 | |
| Threshold for frequency to recover | VFR | 2.85 | 3 | 3.15 | V | CFSET = 1nF | 5 |
| FSET reference voltage | VFSET | 1.18 | 1.25 | 1.32 | V | 5 | |
| Typical operating frequency | fS | 43 | 49 | 55 | kHz | RFSET = 200kΩ | 5 |
| Typical operating frequency | fS | 87 | 99 | 111 | kHz | RFSET = 200kΩ, CFSET = 1nF, VFB = 3.5V | 5 |
| Maximum switching duty | Dmax | 79 | 83 | 87 | % | 5 | |
| Maximum current set point | VCSL | 0.91 | 0.97 | 1.02 | V | 6 | |
| Short-circuit protection set point | VSCP | 1.43 | 1.5 | 1.57 | V | 6 | |
| Protection voltage | VPRO | 2.92 | 3.1 | 3.32 | V | 6 | |
| VCC to GND | VCC | 10 | 24 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| D pin voltage | D | -0.3 | 900 | V | 4 | ||
| VCC pin voltage | VCC | -0.3 | 30 | V | 4 | ||
| All other pins | -0.3 | 6.5 | V | 4 | |||
| Continuous power dissipation SOIC8-7A | PD | 1.3 | W | TA = +25°C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Lead temperature | 260 | °C | 4 | ||||
| Storage temperature | TSTG | -60 | 150 | °C | 4 | ||
| ESD human body model | 2 | kV | 4 | ||||
| ESD charged device model | 2 | kV | 4 | ||||
| Thermal resistance junction-ambient SOIC8-7A | θJA | 96 | °C/W | JESD51-7, 4-layer PCB | 4 | ||
| Thermal resistance junction-case SOIC8-7A | θJC | 45 | °C/W | JESD51-7, 4-layer PCB | 4 | ||
| Internal pull-up resistor | RFB | 39 | kΩ | Normal operating | 5 | ||
| Internal soft-start time | tSS | 6.7 | ms | 5 | |||
| VCC OVP delay time | tOVP | 70 | μs | 5 | |||
| Frequency jittering range | RJittering | 3.5 | % | in percentage of Fs, ± | 5 | ||
| Leading-edge blanking for current sensor | tLEB1 | 385 | ns | 6 | |||
| Leading-edge blanking for SCP | tLEB2 | 350 | ns | 6 | |||
| Slope compensation ramp | SRamp | 21 | mV/μs | RFSET = 200kΩ | 6 | ||
| Protection hysteresis | VPRO-Hys | 0.2 | V | 6 | |||
| Thermal shutdown threshold | 150 | °C | guaranteed by design | 6 | |||
| Thermal shutdown recovery hysteresis | 30 | °C | guaranteed by design | 6 |
CAD (KiCad official)
- Symbol:
HF920GSE-Z - Footprint:
Package_SO:SOIC-8-N7_3.9x4.9mm_P1.27mm - 3D model: SOIC-7 (KiCad packages3D, STEP)
- 3D model files:
hf920gse-z-etched.step/hf920gse-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hf920gse-z.step/hf920gse-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (26 pp, sha256
f0063d4ce412f57e, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).