HE9008M6R

{
  "slug": "he9008m6r",
  "version": "0.1.0",
  "type": "component",
  "description": "HEERMICR DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "he9008m6r",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "he9008m6r.kicad_sym",
    "he9008m6r.kicad_mod",
    "he9008m6r.glb",
    "he9008m6r.step",
    "he9008m6r.lbr",
    "docs/hero.png",
    "docs/he9008m6r-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "he9008m6r-hero.glb",
    "he9008m6r-hero.overlay.json",
    "he9008m6r-etched.glb"
  ],
  "component": {
    "mpn": "HE9008M6R",
    "manufacturer": "HEERMICR",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589898255787466752",
    "parts": {
      "symbol": "he9008m6r.kicad_sym",
      "footprint": "he9008m6r.kicad_mod",
      "model_3d": "he9008m6r-hero.glb",
      "model_3d_plain": "he9008m6r-etched.glb",
      "model_3d_step": "he9008m6r-etched.step",
      "model_3d_step_plain": "he9008m6r.step",
      "lbr": "he9008m6r.lbr"
    },
    "distributor_links": {
      "lcsc": "C5123432"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T19:31:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated 3.3V output that should be bypassed with a low ESR ceramic capacitor of at least 2.2µF placed as close to the pin as possible."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that should be tied to a ground plane; the datasheet states the exposed pad must be soldered to PCB ground for electrical contact and thermal performance."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "ON/OFF control with high enable and a CMOS threshold of approximately 0.8V; the device is in shutdown when logic low is applied, and this pin must not be allowed to float."
      },
      {
        "number": "4",
        "name": "C-",
        "type": "passive",
        "description": "Flying capacitor negative terminal, connected to one side of the external CFLY of at least 2.2µF."
      },
      {
        "number": "5",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage range of 1.8V to 5V, to be bypassed with a low ESR ceramic capacitor of at least 2.2µF placed as close to the pin as possible."
      },
      {
        "number": "6",
        "name": "C+",
        "type": "passive",
        "description": "Flying capacitor positive terminal, connected to the other side of the external CFLY of at least 2.2µF."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: EN polarity is inconsistent in the datasheet: the pin table says 'ON/OFF Control (High Enable)', the; The Pin Functions text refers to an exposed pad that must be soldered to PCB ground, but the datashe; The datasheet gives no explicit ERC class for the flying capacitor terminals C+ and C-; they are typ"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0358,
        "at": "2026-10-17T19:30:41"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589898255787466752",
        "pages": 7,
        "sha256": "9b8693d372a05631",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "he9008m6r.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "he9008m6r-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e7aafa8de7562e972b8f6a950a4da71407c405f702a1b30deec4e87c71c9cfa8",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}