main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs he2031a36mpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers he2031a36mpr: one-pass backfill (courtyard 25.5 -> 22.62 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chang… · Ray
he2031a36mpr-etched.fit.json he2031a36mpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
he2031a36mpr-etched.glb he2031a36mpr: one-pass backfill (re-etched) · Ray
he2031a36mpr-etched.step he2031a36mpr: one-pass backfill (re-etched) · Ray
he2031a36mpr-hero.glb he2031a36mpr: hero from the plain model · Ray
he2031a36mpr-hero.overlay.json he2031a36mpr: hero from the plain model · Ray
he2031a36mpr.glb Publish 0.1.0 · Ray
he2031a36mpr.kicad_mod he2031a36mpr: one-pass backfill (courtyard 25.5 -> 22.62 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chang… · Ray
he2031a36mpr.kicad_sym Publish 0.1.0 · Ray
he2031a36mpr.lbr he2031a36mpr: one-pass backfill (courtyard 25.5 -> 22.62 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chang… · Ray
he2031a36mpr.step Publish 0.1.0 · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md he2031a36mpr: specified limits as data (metadata.characteristics, 16 rows from the datasheet) · Ray

HE2031A36MPR

HEERMICR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89

HE2031A36MPR from HEERMICR, in a SOT-89. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference pin. Common return for the regulator and the output load; tie directly to the system ground plane.
2 VIN power_in Unregulated input supply pin. Accepts 1.5V to 25V (absolute max); should be at least Vout + Vdropout (Vout + 0.16V @ 100mA) for regulation. Recommended input bypass Cin = 10uF electrolytic; if ceramic caps are used, a series 1.21.8Ω resistor is recommended.
3 VOUT power_out Regulated 3.6V output. Delivers up to 400mA with ±1% accuracy (Vout x 0.99 to Vout x 1.01). Recommended output cap Cout = 10uF electrolytic for stability and transient response.

Key specifications

Parameter Value
Manufacturer HEERMICR
Package SOT-89
Category PMIC
Pins 3

Ordering variants

  • HE2031A36MPR
  • HE2031A36MPRMPG
  • HE2031A36MPRMMR
  • HE2031A36MPRMMG
  • HE2031A36MPRM3R
  • HE2031A36MPRM3G

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature -40 85 ℃ 4
Storage Temperature -40 125 ℃ 4
Output voltage accuracy Vout -1 1 % 1
Input Voltage Vin 25 V 4
Load Regulation △Vout 12 30 mV Vin= Vout+1V 1.0mA≤Iout≤100mA 4
Line Regulation 0.05 0.2 %/V 1.6V≤Vin≤8V Iout=100mA 4
Output voltage temperature coefficient Ta -100 100 ppm/℃ Iout=30mA 0℃≤Ta≤70℃ 4
Supply Current Iss1 1 2 uA 4
Dropout Voltage Vdif 0.16 0.18 V 3.0 < Vout ≤ 4.0, Iout=100 mA 4
Dropout Voltage Vdif 0.21 0.24 V 3.0 < Vout ≤ 4.0, Iout=200 mA 4
Dropout Voltage Vdif 0.8 0.85 V 3.0 < Vout ≤ 4.0, Iout=400 mA 4
Series input resistor Re Re 1.2 1.8 Ω Ceramic input/output capacitors (Note 2) 5
Output Current Iout 400 mA Vin-Vout=1V 4
Power Supply Rejection Ratio PSRR 60 dB F=1KHz Vin=Vout+1V 4
Input capacitor Cin Cin 10 uF Electrolytic capacitor recommended (Note 1) 5
Output capacitor Cout Cout 10 uF Electrolytic capacitor recommended (Note 1) 5

CAD (KiCad official)

  • Symbol: HE2031A36MPR
  • Footprint: Package_TO_SOT_SMD:SOT-89-3
  • 3D model: SOT-89 (KiCad packages3D, STEP)
  • 3D model files: he2031a36mpr-etched.step / he2031a36mpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); he2031a36mpr.step / he2031a36mpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HEERMICR datasheet (None pp, sha256 da0d9ffdd9bd5fee, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF