main
Ray
Publish 0.1.0
6768564
HD8024H
Broadic · Brushed DC Motor Drivers · SOT23-6
HD8024H from Broadic, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | Reverse-drive H-bridge output that sources or sinks the motor current in the reverse direction, with continuous output current rated up to 800 mA at VDD=5V on the OUT1 to OUT2 path. |
| 2 | GND | power_in | Ground pin of the device, which must be connected to the system ground. |
| 3 | IN2 | input | Reverse direction control input; logic levels are VINL 0.6V maximum and VINH 2.4V minimum at VDD=3V, with an internal pull-down of about 15 kΩ and an absolute maximum input of 5.5V. |
| 4 | IN1 | input | Forward direction control input; logic levels are VINL 0.6V maximum and VINH 2.4V minimum at VDD=3V, with an internal pull-down of about 15 kΩ and an absolute maximum input of 5.5V. |
| 5 | VDD | power_in | Supply pin; the recommended operating supply range is 2V to 8V, and the absolute maximum supply voltage is listed as VDD(MAX) with no value printed. |
| 6 | OUT1 | output | Forward-drive H-bridge output that sources or sinks the motor current in the forward direction, with continuous output current rated up to 800 mA at VDD=5V on the OUT1 to OUT2 path. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadic |
| Package | SOT23-6 |
| Category | Motor Driver ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 | VDD | 2 | 8 | V | 3 | ||
| 输入电压 | VIN | 0 | 5 | V | 3 | ||
| OUT1至OUT2持续输出电流 | IOC | 800 | 1000 | mA | VDD=5V | 3 | |
| 最大外加输入电压 | VIN(MAX) | 5.5 | V | 3 | |||
| 峰值输出电流 | IOUT(PEAK) | 1 | A | 3 | |||
| 最大功耗 | PD | 0.6 | W | 3 | |||
| 工作温度范围 | Topr | -20 | 85 | ℃ | 3 | ||
| 结温 | TJ | 150 | ℃ | 3 | |||
| 储存温度 | Tstg | -55 | 150 | ℃ | 3 | ||
| 焊接温度 | TLED | 260 | ℃ | 10 s | 3 | ||
| ESD | 3000 | V | Human body model, 100pF through 1.5KΩ | 3 | |||
| VDD待机电流 | IVDDST | 10 | uA | IN1=IN2=L;VDD=8V;输出悬空;测试图1 | 4 | ||
| VDD静态电流 | IVDD | 90 | uA | IN1=H OR IN2=H;输出悬空;测试图2 | 4 | ||
| 输入高电平 | VINH | 2.4 | V | VDD=3V;测试图2 | 4 | ||
| 输入低电平 | VINL | 0.6 | V | VDD=3V;测试图2 | 4 | ||
| 输入高电平电流 | IINH | 200 | uA | VDD=3V, VINH=3V;测试图2 | 4 | ||
| 导通内阻 | RON | 0.5 | Ω | IO=±100mA VDD=6.5V;测试图3 | 4 | ||
| 导通内阻 | RON | 0.7 | Ω | IO=±500mA VDD=6.5V;测试图3 | 4 | ||
| 输入下拉电阻 | RIN | 15 | KΩ | VDD=3V, VINH=3V;测试图2 | 4 | ||
| 热关断温度点 | TSD | 150 | ℃ | 4 | |||
| 热关断温度迟滞 | TSDH | 20 | ℃ | 4 | |||
| 结到环境热阻 | θJA | 220 | ℃/W | 3 |
CAD (KiCad official)
- Symbol:
HD8024H - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT23-6 (KiCad packages3D, STEP)
- 3D model files:
hd8024h-etched.step/hd8024h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hd8024h.step/hd8024h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadic datasheet (6 pp, sha256
423061b7ab9b174c, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HD8024H
**Broadic** · Brushed DC Motor Drivers · SOT23-6
HD8024H from Broadic, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | Reverse-drive H-bridge output that sources or sinks the motor current in the reverse direction, with continuous output current rated up to 800 mA at VDD=5V on the OUT1 to OUT2 path. |
| 2 | GND | power_in | Ground pin of the device, which must be connected to the system ground. |
| 3 | IN2 | input | Reverse direction control input; logic levels are VINL 0.6V maximum and VINH 2.4V minimum at VDD=3V, with an internal pull-down of about 15 kΩ and an absolute maximum input of 5.5V. |
| 4 | IN1 | input | Forward direction control input; logic levels are VINL 0.6V maximum and VINH 2.4V minimum at VDD=3V, with an internal pull-down of about 15 kΩ and an absolute maximum input of 5.5V. |
| 5 | VDD | power_in | Supply pin; the recommended operating supply range is 2V to 8V, and the absolute maximum supply voltage is listed as VDD(MAX) with no value printed. |
| 6 | OUT1 | output | Forward-drive H-bridge output that sources or sinks the motor current in the forward direction, with continuous output current rated up to 800 mA at VDD=5V on the OUT1 to OUT2 path. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadic |
| Package | SOT23-6 |
| Category | Motor Driver ICs |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 | VDD | 2 | | 8 | V | | 3 |
| 输入电压 | VIN | 0 | | 5 | V | | 3 |
| OUT1至OUT2持续输出电流 | IOC | | 800 | 1000 | mA | VDD=5V | 3 |
| 最大外加输入电压 | VIN(MAX) | | | 5.5 | V | | 3 |
| 峰值输出电流 | IOUT(PEAK) | | | 1 | A | | 3 |
| 最大功耗 | PD | | | 0.6 | W | | 3 |
| 工作温度范围 | Topr | -20 | | 85 | ℃ | | 3 |
| 结温 | TJ | | | 150 | ℃ | | 3 |
| 储存温度 | Tstg | -55 | | 150 | ℃ | | 3 |
| 焊接温度 | TLED | | | 260 | ℃ | 10 s | 3 |
| ESD | | | | 3000 | V | Human body model, 100pF through 1.5KΩ | 3 |
| VDD待机电流 | IVDDST | | | 10 | uA | IN1=IN2=L;VDD=8V;输出悬空;测试图1 | 4 |
| VDD静态电流 | IVDD | | | 90 | uA | IN1=H OR IN2=H;输出悬空;测试图2 | 4 |
| 输入高电平 | VINH | 2.4 | | | V | VDD=3V;测试图2 | 4 |
| 输入低电平 | VINL | | | 0.6 | V | VDD=3V;测试图2 | 4 |
| 输入高电平电流 | IINH | | | 200 | uA | VDD=3V, VINH=3V;测试图2 | 4 |
| 导通内阻 | RON | | | 0.5 | Ω | IO=±100mA VDD=6.5V;测试图3 | 4 |
| 导通内阻 | RON | | | 0.7 | Ω | IO=±500mA VDD=6.5V;测试图3 | 4 |
| 输入下拉电阻 | RIN | | 15 | | KΩ | VDD=3V, VINH=3V;测试图2 | 4 |
| 热关断温度点 | TSD | | 150 | | ℃ | | 4 |
| 热关断温度迟滞 | TSDH | | 20 | | ℃ | | 4 |
| 结到环境热阻 | θJA | | 220 | | ℃/W | | 3 |
## CAD (KiCad official)
- Symbol: `HD8024H`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT23-6 (KiCad packages3D, STEP)
- 3D model files: `hd8024h-etched.step` / `hd8024h-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hd8024h.step` / `hd8024h.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Broadic datasheet](docs/hd8024h-datasheet.pdf) (6 pp, sha256 `423061b7ab9b174c`, retrieved 2026-10-28, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hd8024h-datasheet.pdf)